Publications

Journal Papers 

83. V. Sharma, A. Mallick*, J. Joardar, S. Kumar and S. V. Konovalov, 2024,  Nanostructured Al-Ti-Fe-Mn-Ni High-Entropy Alloy by Mechanical Alloying: Synthesis and Characterization , Arabian Journal for Science and Engineering . DOI: https://doi.org/10.1007/s13369-024-08805-0 

82.  V. Sharma, Rahul MR, A. Mallick*, 2024, Microstructural, mechanical, and tribological behaviors of Cu40Fe30Mn20Cr5Ti5 high entropy alloy via powder metallurgy route, Materials Today Communications, 38, 108313.  DOI: https://doi.org/10.1016/j.mtcomm.2024.108313 

81. M.S. Kujur, A. V. Krishsnan, V. Manakari, G. Parande, Hajo Dieringa, A. Mallick* and M. Gupta, 2024, Scope of magnesium ceria nanocomposites for mandibular reconstruction: Degradation and biomechanical evaluation using a 3D -dimensional finite element analysis approach, J. of the Mech. Behavior of Biomedical Materials, 152, 106424. https://doi.org/10.1016/j.jmbbm.2024.106424  

80. A. Mallick*, S. Deka, V. Sharma, A. Kumar, 2023, Strain rate dependent mechanical behavior of nanostructured Mg-3%Al alloys, J. of Int. Scientific Publications: Materials, Methods & Technologies, 17, 53–62. DOI: https://doi.org/10.62991/MMT1996349817. 

79.  S. Deka, F Mozafari, A. Mallick*, 2023, Microstructural, mechanical, tribological, and corrosion behavior of ultrafine bio-degradable Mg/CeO2 nanocomposites: Machine learning-based modeling and experiment, Tribology International, 190, 109063 

78.  S. Deka, F Mozafari, A. Mallick*, 2023, A comprehensive experimental and modeling study of the strain rate-and temperature-dependent deformation behavior of bio-degradable Mg-CeO2 nanocomposites, Composites Part A: Applied Science and Manufacturing, 107936 

77.  V. Sharma, A. Mallick*, M Gupta, 2023, Enhancing significantly the strength and tribological response of Al7075 alloy using nano-ZrO2 reinforcement, J. of Mat. Res. and Tech., 27, 7280-7292. 

76. A. Mallick*, Panchenko I.A., Konovalov S.V., 2023,  Effect of ball-milling on mechanical properties of Mg – 3 % Al alloys, Bulletin of the Siberian State Industrial University, 2 (44), 72–78. (In Russ.). http://doi.org/10.57070/2304-4497-2023-2(44)-72-78 

75.  A. Dewangan, A. Mallick and A. K. Yadav et al., 2023,  Production of oxy-hydrogen gas and the impact of its usability on CI engine combustion, performance, and emission behaviors, Energy, 278, 127937.

74. A. Dewangan, A. Mallick, AK Yadav, A Ahmad, D Alqahtani, S Islam, 2023, Combined effect of operating parameters and nanoparticles on the performance of a diesel engine: response surface methodology-coupled genetic algorithm approach, ACS omega 8 (27), 24586-24600.

73. V. Sharma, A. Mallick*, K. Kumar, 2023, Effect of graphene nanoplates on the mechanical and corrosion properties of aluminium nanocomposite fabricated by powder metallurgy, Tribology and Materials, 2 (4), 154-161.

72.  Gaurav Kumar Sharma, A. Mallick, R.K. Sharma, Navneet Kumar, D. B. Singh, 2023, A comprehensive study on the effect of variation of flow rate of fluid and N on energy metrics of N similar photovoltaic thermal flat plate collectors integrated single slope solar still, Desalination and Water Treatment, 283, 97 - 108.

71. S. Deka, F. Mozafari, A. Mallick*, P Thamburaja, M. Gupta, 2023, Development of high-performance nanostructured aluminum and its constitutive modeling, Mechanics of Advanced Materials and Structures https://doi.org/10.1080/15376494.2023.2262733.

70. A. Dewangan, A. Mallick, 2022, Multi-objective optimization of performance and emission characteristics of diesel engine fueled with Bauhinia variegata biodiesel using hybrid approach, Int. J. of Environmental Sci. & Tech., 19 (12), 12395.

69. A Dewangan, AK Yadav, A Mallick, A Pal, S Singh, 2022, Comparative study of Manilkara zapota and Karanja based biodiesel properties and its effect on diesel engine characteristics, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44 (2), 5143-5153.

68. Sanjeev Kumar Sharma, A. Mallick, Desh Bandhu Singh, Gopal Nath Tiwari, 2022, Experimental study of solar energy–based water purifier of single-slope type by incorporating a number of similar evacuated tubular collectors, Environmental Science and Pollution Research, 29, 6837–6856 (Q1) (IF: 5.19).

67. Gaurav Kumar Sharma, A. Mallick, Ram K Sharma, Ritvik Dobriyal, Navneet Kumar, D. B. Singh, 2022, An investigation on dissimilarity of mass flow rate and Non exergo‑enviro‑economic parameters for solar still of single slopetype integrated with N similar PVT flat plate collectors having series connection, Environmental Science and Pollution Research  (doi.org/10.1007/s11356-022-20406-8) (Q1) (IF: 5.19).  

66. V. Venkitesh and A.Mallick*, 2022, Thermal analysis of a convective–conductive–radiative annular porous fin with variable thermal parameters and internal heat generation, J. of  Ther. Analysis and Calorimetry,  147, 1519 - 1533  (Q1) .

65. D.K. Das, A. Mallick, and S.K. Singh, 2022, Estimating thermal properties of plumbene by multiscale modeling using Molecular dynamics simulation technique, Mechanics of Advanced Materials and Structures, 29, 2119 - 2125. (Q1). (https://doi.org/10.1080/15376494.2020.1852347). (IF: 4.03)

 64. M. S. Kujur, A. Mallick* and M. Gupta, 2021, Development of Magnesium Nanocomposites by Powder Metallurgy for Multifunctional Applications: Review, Current Nanomaterials, 6, 185– 206.

63. Md. Alamgir, G.C.Nayak, A. Mallick* and S. Sahoo, 2021, Effects of TiO2 and GO on the thermo-mechanical properties of bioactive poly-HEMA nanocomposites, Iranian Polymer Journal, 30, 1089–1099.).

 62. M. Alamgir, A. Mallick∗ and G.C Nayak, 2021, Mechanical and thermal behavior of pHEMA and pHEMA nanocomposites targeting for dental materials,  Applied Nanoscience, 11, 1257–1265 (Q3).

61. P. Kumar, K. Skotnicova, A. Mallick, M. Gupta, T. Cegan and J. Jurica, 2021, Mechanical Characterization of Graphene Nanoplatelets-Reinforced Mg-3Sn Alloy Synthesized by Powder Metallurgy, Metals, 11, 62 (https://doi.org/10.3390/met11010062), (Q2).

 60. S. Deka, A. Mallick*, P.P. Behera and P. Thamburaja, 2021, Thermal stresses in a functionally graded rotating disk: an approximate closed-form solution, J. of Thermal Stresses, 44 (1), 20-50, (Q2)

  59. M.S. Kujur, V. Manakari, G. Parande, S. Prasadh, R. Wong, A. Mallick and M. Gupta, 2021 “Effect of Samarium Oxide Nanoparticles on The Degradation And In Vitro Biocompatibility of Magnesium for Biomedical Applications”, Materials Today Communications, 26, 102171          (IF: 2.678, )

 58. M.S. Kujur, V. Manakari, G. Parande, S. Prasadh, R. Wong, A. Mallick* and M. Gupta, 2021 “Development of Rare-earth Oxide Reinforced Magnesium Nanocomposites for Orthopedic Applications: A Mechanical/Immersion/Biocompatibility Perspective”, J. of the Mechanical Behaviour of Biomedical Materials, 114, 104162, (IF: 3.372, Q2: Materials Science /Biomedical / Biomaterials)

56. D. B. Singh, G. Bansal, H. Prasad, A. Mallick, N. Kumar, S. K. Sharma, 2021, Sensitivity Analysis of N Undistinguishable PVT Compound-Parabolic-Concentrator-Collectors (Partly Covered, 50%) Integrated Single Slope Solar Distiller Unit Journal of Solar Energy Engineering(ASME), 143, 021003-1.

55.  P. K. Roy, H. Mondal, A. Mallick, and D. K. Prasad, 2020, Inverse and efficiency of heat transfer convex fin with multiple nonlinearities, Heat Transfer, Heat Transfer. 50 (1), 158–178. 

54. S. K. Sharma, A. Mallick, S. K. Gupta, N. Kumar, D. B. Singh, G.N. Tiwari, 2020, Characteristic equation development for double slope solar distiller unit augmented with N identical parabolic concentrator integrated evacuated tubular collectors, Desalination and Water Treatment¸187, 178–194. (Q4)

53. P. Kumar, A. Mallick∗, M. S. Kujur, K. S. Tun and Manoj Gupta, 2020, Synthesis and analysis of Mg–3%Al  alloy nanocomposites reinforced by RGO",  Materials and Manufacturing Processes, 35, 1650 - 1660. (Q2)

52.   S. K. Sharma, D.B. Singh, A. Mallick, S.K. Gupta, 2020, Energy metrics and efficiency analyses of double slope solar distiller unit augmented with N identical parabolic concentrator integrated evacuated tubular collectors: A comparative study, Desalination  and Water Treatment, 195, 40-56. (Q4)

51. S. K. Sharma, D. B. Singh, N. Kumar,  A. Mallick, S.K. Gupta, 2020, Energy, exergy and cost analyses of double slope solar distiller unit augmented with N identical parabolic concentrator integrated evacuated tubular collectors: A comparative study, Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, (In press)

50.  H. Prasad, P. Kumar, R.K. Yadav, A. Mallick, N. Kumar, D.B. Singh, 2019, Sensitivity analysis of N identical partially covered (50%) PVT compound parabolic concentrator collectors integrated double slope solar distiller unit,  Desalination and Water Treatment, 153, 54–64. (Q4)

49. M. Alamgir, A. Mallick, G.C Nayak, S.K Tiwari, 2019, Development of PMMA/TiO2 nanocomposites as excellent dental materials, J. of Mech.  Sci. and Tech. 33 (10), 4755-4760 (Q3)  

48. A. Dewangan, A. K. Yadav, and A. Mallick, A. Pal, S. Singh, 2019, Comparative study of Manilkara zapota and Karanja based biodiesel properties and its effect on diesel engine characteristics, Energy Source, Part A: Recovery, Utilization, and Effects (Q3)       https://doi.org/10.1080/15567036.2019.1661551. 

47.  D. B. Singh, N. Kumar, Harenderc, S. Kumar, S. K. Sharmae, A. Mallick, 2019, Effect of depth of water on various efficiencies and productivity of N identical partially covered PVT collectors incorporated single slope solar distiller unit, Desalination and Water Treatment, 138, 99–112. (Q4)

46.  A.K. Singh, D.B. Singh, A. Mallick, Harenderd, S.K. Sharma, N. Kumar, V.K. Dwived, 2019, Performance analysis of specially designed single basin passive solar distillers incorporated with novel solar desalting stills: A review, Solar Energy, 185, 146-164. (Q1: Material Science)

 45. R, Ranjan, A.Maliick* , P Jana, 2019, 2019, Thermoelastic study of a functionally graded annular fin with variable thermal parameters, J of Thermal  Stresses, 42, 1272-1297. (Q1: Material Science / Condensed Matter Physics).

44. P. Kumar, A. Mallick∗, M. S. Kujur, K. S. Tun and Manoj Gupta, 2019, Effects of graphene nanoplatelets on the tribological, mechanical, and thermal properties of Mg-3Al alloy nanocomposites, Int. J. of Materials Research, 110, 534-542. (Q3)

43.   A. Mallick*, R. Ranjan and Dilip K. Prasad, 2019, Inverse estimation of variable thermal parameters in a functionally graded annular fin using dragon-fly optimization, Inverse problem in Sci. & Engg., 27, 969 - 986, (Taylor & Francis) (Q2: in comp. Sci & Tech.)

42.  A. Mallick*, Dilip K. Prasad and P. P. Behera, 2019, Stresses in radiative annular fin under thermal loading and its inverse modeling using  Sine Cosine Algorithm (SCA), J. of Thermal Stresses, 42, 401–415 (Taylor & Francis) (Q1: Material Science / Condensed Matter Physics)

41. A. Dewangan, A. K. Yadav, and A. Mallick, 2018, Current scenario of bio-diesel development in India: prospects and challenges,  Energy Source, Part A: Recovery, Utilization, and Effects, 40, 2494 - 2501 (Taylor & Francis) (Q3: Energy Engg & Power Tech.)

 40. A.K. Singh, D.B. Singh, A. Mallick, N Kumar, 2018, Energy matrices and efficiency analyses of solar distiller units: A review, Solar Energy, 173, 53–75 (Elsevier) (Q1: Material Science) 

 39. K. B. Mardi, A.R. Dixit, A. Mallick, A.R. Reddy, 2018, Effect of Al2O3 nanoparticles on tribological behaviour of Mg-6Al alloy-based nanocomposites, Int. J. of Surface Science and Engineering, 12, 402-218 (Q2: Mechanical Engineering)  

38. A. K. Yadav, A. Dewangana, A. Mallick,  2018, Effect of Additives (n-Butanol and Diethyl Ether) on Performance and Emission  Characteristics of a Diesel Engine Fuelled with Diesel-Pongamia Biodiesel Blend,  Journal of Energy Engineering, 2018, 144(6): 04018062 (ASCE) (Q2)

37. M. S. Kujur, V. Manakari, G. Parande, K. S. Tun, A. Mallick* and M. Gupta, 2018, Enhancement of Thermal, Mechanical, Ignition and Damping Response of Magnesium using Nano-Ceria Particles,  Ceramics International, 44, 15035–15043 (Elsevier). (Q1: Ceramic composites)

 36. K. Bimla Mardi, A. Mallick*, A. R. Dixit, 2018, M. Gupta, 2018, Enhancing Compressive Response of Mg-6Al Alloy using Al2O3 Nanoparticles, Kovove Materialy-Metallic Materials, 56, 183–190 (Q3: Materials Chemistry)

35. R. Ranjan and A. Mallick*, 2018, An efficient unified approach for performance analysis of functionally graded annular fin with multiple variable parameters, Thermal Engineering, 65, 614–626 (Springer) (Q2: Energy Engineering & Power Technology)  

34. A. K. Yadav, A. Dewangana, A. Mallick,  2018, Synthesis and Stability Study of Biodiesel from Kachnar Seed Oil, J. of Energy Eng., 144(5): 04018053 (ASCE) (Q2: Civil & Structural Engineering)

 33. P. K. Roy, A. Mallick, H. Mondal, P. Sibanda, 2018, A Modified Decomposition Solution of Triangular Moving Fin with Multiple Variable Thermal Properties, Arabian Journal for Sci. and Engg., 43, 1485–1497 (Springer) (Q2: Multidisciplinary)

32.  P. Kumar, A. Mallick*, M.S. Kujur, K.S. Tun, R. Shabadi, M Gupta, 2018, Strength of Mg/3%Al alloy in presence of graphene nano-platelets as reinforcement, Materials Science and Technology, 34, 1086–1095 (Taylor & Francis) (Q2: Condensed Matter Physics)

 31. Md. Alamgir, G.C.Nayak, A. Mallick*, S. K. Tiwari, S. Mandol and M. Gupta, 2018, Processing of PMMA nanocomposites reinforcing with biocompatible nanoparticles of GO and TiO2, Materials and manufacturing processes, 33, 1291–1298 (Taylor & Francis) (Q2: Industrial and manufacturing physics)

30. M. S. Kujur, A. Mallick*, V. Manakari, G. Parande, K. S. Tun, and M. Gupta, 2017, Significantly Enhancing the Ignition/Compression/Damping Response of Monolithic Magnesium by Addition of Sm2O3 Nanoparticles, Metals, 7, 357 (Appeared as a cover page article). (Q1: Matallurgy & Metallugical Engg.)

 29. P. K. Roy, A. Mallick, H. Mondal, S. Goqo, P. Sibanda, 2017, Numerical study on rectangular-convex-triangular profiles with all variable thermal properties,  Int. J. of Mechanical Sciences, 133, 251-259 (Elsevier) (Q1: Civil and Structural Engg.)

 28. A. Dewangan and A. Mallick, 2017, Ultrasonic-assisted production of biodiesel from Manilkara Zapota (L.) seed oil, Energy Source, Part A: Recovery, Utilization, and Effects, 39, 1594-1601 (Taylor & Francis). (Q3: Energy Engg & Power Tech.)

27. K Bimla Mardi, AR Dixit, A Mallick, 2017, A. Pramanik, B. Ballokova, P. Hvizdos, J. Foldyna, J. Scucka, P. Hlavacek, M. Zelenak, 2017, Surface integrity of Mg-based nanocomposite produced by Abrasive Water Jet Machining (AWJM), Materials and Manufacturing Processes, 32, 1707 - 1714 (Taylor & Francis). (Q1: Industrial and manufacturing physics)

 26. K Bimla Mardi, AR Dixit, A Mallick, 2017, Studies on Non-traditional Machining of Metal Matrix Composites, Materials Today: Proceeding, 4, 8226–8239 (Elsevier). (quartile not assigned yet)

25.  R. Ranjan, A. Mallick*, D. Kumar,  2017, Closed-form solution for a conductive-convective-radiative annular fin with multiple nonlinearities and its inverse analysis, Heat and Mass Transfer, 53,1037–1049 (Springer) (Q2: Fluid flow and transfer process)

 24.  A. Mallick*, R. Ranjan, D. Kumar, R. Das, 2016, Inverse prediction and application of homotopy perturbation method for efficient design of an annular fin with variable thermal conductivity and heat generation, Mathematical Modelling and Analysis, 21, 699 – 717 (Taylor & Francis) (Q3: Modeling and Simulation)

 23.  A. Mallick*, R. Ranjan, P.K. Sarkar, 2016,  Effect of heat transfer on thermal stresses an annular hyperbolic fin: An approximate analytical solution, J. of Theo. and Applied Mechanics, 54, 437 - 448 (ptmts, Poland) (Q3: Mathematics)

22. A. Mallick*, 2016, Improvement of mechanical properties in light weight Mg-based materials, Procedia Engineering, 149, 283 – 287 (Elsevier) (Quartile not yet assigned)

21.  P.K. Roy, A. Mallick, 2016, Thermal analysis of straight rectangular fin using homotopy perturbation method, Alexandria Engineering Journal, 55, 2269 – 2277 (Elsevier). (Q1: Engineering)

20.   A. Mallick*, R. Ranjan, R.Das, 2016, Application of homotopy perturbation method and inverse prediction of thermal parameters for an annular fin subjected to thermal Load, J. Thermal Stresses, 39, 298 - 313 (Taylor & Francis) (Q1: Material Science / Condensed Matter Physics)

19. P.K.Roy, H. Mandol, A. Mallick, 2015, A decomposition method for convective–radiative fin with heat generation, Ain Shams Engg. Journal, 6, 307 - 313 (Elsevier) (Q1: Engineering).

18. P. K. Roy, A. Das, H. Mondal, A. Mallick, 2015,  Application of homotopy perturbation method for a conductive–radiative fin with temperature dependent thermal conductivity and surface emissivity, Ain Shams Engineering Journal, 6, 1001-1008 ((Elsevier) (Q1: Engineering).

17. A. Mallick*, S. Ghosal, P. K. Sarkar, R. Ranjan, 2015, Homotopy Perturbation Method (HPM) for Thermal Stresses in an Annular Fin with Variable Thermal Conductivity, J. Thermal Stresses, 38, 110 - 132, 2015 (Taylor & Francis) (Q1: Material Science / Condensed Matter Physics). 

16. A. Bhowmik, Ranjan Das, R. Repaka and A. Mallick, 2014, Inverse modelling of a solar collector involving Fourier and non-Fourier heat conduction, App. Mathematical Modelling, 38, 5126 - 5148 (Elsevier) (Q1: Modeling and Simulation)     

15. A. Mallick and R. Das, 2014, ‘Application of Simplex search method for predicting unknown parameters in an annular Fin subjected to thermal stresses,  J. Thermal Stresses 37, 236 - 251  (Taylor & Francis) (Q1: Material Science / Condensed Matter Physics).  

14. R. Das, A. Mallick, K .T. Ooi, 2013, 'Inverse estimation of heat transfer coefficient and thermal conductivity in a conductive-convective and radiative fin'. J. Heat &Mass Transfer, 49, 1029 - 1038 (Springer). (Q3: Mechanics / Thermodynimics)

13. A. Mallick*,  2013 ‘Effect of second phase mobile and immobile particles on polycrystalline grain growth: A Phase field approach’, Computational Materials Science, 67: 27 – 34 (Elsevier). (Q2)

12. A. Mallick*, K.S. Tun and M. Gupta, 2012, ‘Deformation behaviour of Mg/Y2O3 nanocomposite at elevated temperatures’, Material Science and Engineering - A, 551, 222 - 230 (Elsevier). (Q1: Matallurgy & Metallugical Engg.) 

11. A. Mallick*, 2011, ‘Tensile properties of Ultrafine Mg-3%Al alloy at elevated temperatures’, Int. J. Mat. Research, 102, 48 -53 (Carl Hanser, Germany).

10. A. Mallick, K.S. Tun, S. Vedantam, and M. Gupta, 2010 ‘Mechanical Characteristics of Pure Mg and Mg/Y2O3 Nanocomposite in 25–250°C Temperature Range’, J. of Material Science, 45, 3058 – 3066 (Springer).

9.  S. Vedantam, and A. Mallick, 2010, ‘Phase field theory of grain growth in the presence of mobile second phase particles’, Acta Materialia, 58, 272-281 (Elsevier). (Q1: Matallurgy & Metallugical Engg.)

8. S. Vedantam, and A. Mallick, 2010, ‘Theory of grain growth in the presence of mobile second phase particles’, Submitted to Phyl. Magazine (Taylor & Francis).

7. A. Mallick, and S. Vedantam, 2009, ‘Phase field study of the effect of grain boundary energy anisotropy on grain growth’, Computational Materials Science 46, 21-25 (Elsevier).

6. A. Mallick, S. Vedantam, and L. Lu, 2009, ‘Grain size dependent tensile behavior of Mg-3%Al alloy at elevated temperatures, Material Science and Engineering A, 515, 14-18 (Elsevier). (Q1: Matallurgy & Metallugical Engg.)

 5. A. Mallick, 2009, ‘Nanocrystalline Mg-3%Al alloy: its synthesis and investigation of its tensile behavior’, Int. J. of Engg. & App. Sci., 5 (6), 411 - 414.

4. P.C. Dumir, G.P. Dubey, and A. Mallick, 2005, ‘Axisymmetric buckling of Laminated Thick Annular Spherical Cap’ Communications in Nonlinear Science and Numerical Simulation, 10, 191–204 (Elsevier). (Q1: Mechanics /Physics / Mathematical)

 3. P.C. Dumir, G.P. Dubey, and A. Mallick, 2003, ‘Axisymmetric Static and Dynamic Buckling of Laminated Thick Truncated Conical Cap’, Int. Journal of Nonlinear Mechanics, 38, 903–910 (Elsevier). (Q2: Mechanics)

 2. P.C. Dumir, G.P. Dubey, and A. Mallick, 2001, ‘Axisymmetric Postbuckling of Moderately Thick Laminated Annular Plate’, Composite Structure, 51, 311–318 (Elsevier). (Q1: Mechanics / Mateial Science)

 1. G.P. Dubey, P.C. Dumir, and A. Mallick, 2000, ‘Dynamic Buckling of Laminated Thick Shallow Spherical Cap Based On a Static Analysis’, Mechanics Research Communication, 27, 561–566 (Elsevier). (Q2: Mechanics)

 16. A. Mallick, S. Vedantam, and M. Gupta, ‘Compressive behaviour of Mg/Y2O3 nanocomposite studied at elevated temperatures’ (in preparation). 

 Book Chapter

5. Alamgir, M., Panchal, M., Mallick, A., Nayak, G.C., Kumar Singh, S. (2023). Introduction of Metal Nanoparticles, Dental Applications, and Their Effects. In: Tiwari, S.K., Kumar, V., Thomas, S. (eds) Nanoparticles Reinforced Metal Nanocomposites. Springer Nature, Singapore. https://doi.org/10.1007/978-981-19-9729-7_2 

4. Ved Prakash Dubey, M. Kopec, A. Mallick, Z. L. Kowalewski, 2021, The Effect of Enhanced Solid Solubility on the Microstructure and Mechanical Properties of Al-Cr Solid Solution by Powder Metallurgy Process, MATERIAŁY I TECHNOLOGIE XXI WIEKU (ISBN 978-83-7880-776-6) 

3. M.S. Kujur, Ved Prakash Dube, A. Mallick*, M. Gupta, 2021, Tensile Characteristics of Metal Matrix Composites, Encyclopedia of Materials:  Composites, Elsevier (https://doi.org/10.1016/B978-0-12-819724-0.00100-2) (Citation as: Milli S. Kujur, Ved P. Dubey, Ashis Mallick, Manoj Gupta, Tensile Characteristics of Metal Matrix Composites, Reference Module in Materials Science and Materials Engineering, Elsevier, 2021, ISBN 9780128035818, https://doi.org/10.1016/B978-0-12-819724-0.00100-2.)

 2. P. Kumar, B.K. Roy, A. Mandal, A. Mallick, M. Gupta, 2021 Influence of Spindle Rotational Speeds on Pure Mg and 0.1GNP-3Al-Mg Alloy-Nanocomposite in Wire Electrical Discharge Turning Process, Sharma, B.P., Rao, G.S., Gupta, S., Gupta, P., Prasad, A. (Eds.),  Advances in Engineering Materials, Lecture Notes in Mechanical Engineering, Springer Nature, Singapore

1. Kujur M.S., Manakari V., Parande G., Doddamani M., Mallick A., Gupta M., 2019, Role of Rare Earth Oxide Reinforcements in Enhancing the Mechanical, Damping and Ignition Resistance of Magnesium. In: Srivatsan T., Gupta M. (eds) Nanocomposites VI: Nanoscience and Nanotechnology in Advanced Composites. The Minerals, Metals & Materials Series. Springer, Cham        (https://doi.org/10.1007/978-3-030-35790-0_10).

Conference Papers (underline indicates paper presenter)

34. A. Mallick, Surja Deka, Vivek Kr. Sharma, Ashutosh Kumar. STRAIN RATE DEPENDENT MECHANICAL BEHAVIOR OF NANOSTRUCTURED MG- 3%AL ALLOYS, J. of Int. Sci. Publications: Materials, Methods & Technologies 17, 53-62 (2023). https://www.scientific-publications.net/en/article/1002687/ 

33. Surja Deka, Farzin Mozafari and Ashis Mallick, 2023, Deformation behavior of nanostructured aluminum: Experiment and computational study, Materials Today: Proceedings, DOI: https://doi.org/10.1016/j.matpr.2023.03.577

32. Vivek Sharma, Shakti Kumar and Ashis Mallick, 2023, Light Weight MnTiAlNiFe High-Entropy Alloy (LWHEA) Fabricated by Powder Metallurgy Process: Mechanical, Microstructure, and Tribological Properties, Materials Today: Proceedings, DOI: https://doi.org/10.1016/j.matpr.2023.04.157.

31. A. Mallick and S. Deka, 2023, Stresses in a Functionally Graded Rotating Disk Subjected to Thermal Loading ,  AIP Conf. Proc. 2894, 020009 (2023),  doi.org/10.1063/5.0162884. 

30.  M Alamgir, S Shahabuddin, A Mallick, GC Nayak, 2022, Processing of pHEMA/TiO2 based nanocomposites used as an excellent dental material, Materials Today: Proceedings, 62, 7088-7091. 

29. G.K. Sharma, N. Kumar, D. B. Singh, A. Mallick, 2020, Exergoeconoic analysis of single slope solar desalination unit coupled with PVT-COCs by incorporating the effect of dsissimilarity of the rate of flowing fluid mass, Materials Today : Proceedings  (In press: Online available).

28.  M.S. Kujur, A. Deshpande, A. Mallick, M. Gupta, 2020, Development of rare-earth oxide reinforced magnesium nanocomposites targeting biomedical applications, Materials Today: Proceedings (In press, online available)

27.  A Dewangan, A Mallick, AK Yadav, A.K. Richhariya, 2020, Effect of metal oxide nanoparticles and engine parameters on the performance of a diesel engine: A review, Materials Today: Proceedings 21, 1722–1727.

26.  A Dewangan, A Mallick, AK Yadav, R Kumar, 2020, Combustion- generated pollutions and strategy for its control in CI engines: A review, Materials Today: Proceedings 21, 1728–1733.

25. M.S. Kujur, V. Manakari, G. Parande, S. Prasadh, R. Wong, A. Mallick and M. Gupta. 2019 “Rare-earth Oxide Reinforced Magnesium Nanocomposites: A Potential Candidate for Automotive and Biodegradable Implant Applications.” 27th International Conference on Processing and Fabrication of Advanced Materials (PFAM-XXVII), 27-29 May 2019, Jonkoping, Sweden. Page 214 - 223

24. M. S. Kujur; V. Manakari ; G. Parande ; S. Prasadh ; R. Wong ; A. Mallick ; M. Gupta ; 2019, Effect of Rare Earth Oxide Nanoparticles on the Mechanical and Biological Properties of Magnesium, Ms&T-19 (Material Science and Technology) Conference, 29 Sep - 03 Oct, 2019, Portland, OREGON, USA. DOI: 10.7449/2019mst/2019/mst_2019_1121_1129

23. A. Mallick, D. K. Prasad and P. P. Behera, 2018, Thermo-mechanical Analysis of a Radiative Annular Fin, Thermophysics 2018, AIP Conf. Proc. 1988, 020029-1–020029-6.

22. P. Kumar, M. S. Kujur, A. Mallick, K. S. Tun and M. Gupta, 2018, Effect of graphene nano-platelets on the mechanical properties of Mg/3wt%Al alloy-nanocomposite, IOP Conf. Series: Materials Science and Engineering 346 (2018) 012001.  

21. Md Alamgir, S. K. Tiwari, A. Mallick, G.C.Nayak, 2018, Graphene oxide and TiO2 based PMMA nanocomposites for dental applications: A comprehensive study of the mechanical properties, IOP Conf. Series: Materials Science and Engineering 377, 012082. 

20. P. Kumar M. S. Kujur, A. Mallick, K. S. Tun and M. Gupta, 2017, Processing and characterization of Mg-3%Al/Graphene nanocomposite, METAL 2017, 24th - 26th May, Brno, Czech Republic, EU.

19. Ashis Mallick and  R. Ranjan, 2017, Thermo-mechanical analysis of a functionally graded annular fin, 23rd Int. Conference on Engineering Mechanics, 15 – 18 May, Svratka, Czech Republic,  614-617. 

18. R. Ranjan, A. Mallick, 2015, Thermal stresses in an annular fin with temperature dependent thermal parameters : Use of HPM, 23rd National Heat and Mass Transfer and 1st International ISHMT-ASTFE Heat and Mass Transfer (An Int. Conf.) IHMTC-2015, 17 - 20, December, 2015, ISRO-Trivandrum, Kerala.

17. S. Mundra, R. Ranjan, A. Mallick, 2014, Application of Mean Value theorem for thermal stresses in an annular fin, 59th Cong. of ISTAM (An Int. Conf.), 17 - 20, December, 2014, Bangalore, India.

16. A. Mallick, P.K. Sarkar, S. Chakraborty, and A. Kumar, Mechanical Behaviour of Nanostructured Mg-3%Al alloy, PFAM – XXII (Int. conf.), 18 – 20, Decemebr, 2013, Singapore.

15. S. Gogoi, J. Saikia, N. Meena and A. Mallick, 2013, Effect of Machining Parameters on the Surface Roughness of Mg/Y2O3 Nano-composite, National Conf. on Recent Trade in Manufacturing Sci. & Tech. (RTMST-2013), NITTTR, India.

14. A. Mallick, S. Vedantam, and L. Lu, 2010, Tensile behaviour of ultrafine-grained and nanocrystalline Mg-3%Al studied at elevated temperatures, Int. Conf. on Nanomaterials: Synthesis, Characterization and Application, India.

13. A. Mallick, K.S. Tun, S. Vedantam, and M. Gupta, 2009, ‘High Temperature Tensile Characteristics of a Mg/Y2O3  Nanocomposite’, Int. Conference on Advanced High-Temperature and High-Strength Structural Materials, Hong-Kong.

12. A. Mallick, and S. Vedantam, 2009, ‘Phase field simulation of polycrystalline grain growth in presence of mobile            second phase particles’, American Institute of Physics (AIP) proceedings, 1091, 240 – 242.

11. S. Vedantam, and A. Mallick, 2009, ‘Phase field simulation of grain growth in the presence of mobile second phase particles’, 10th U.S. National Congress for Computational Mechanics, 16-19, July, 2009, USA.

 10.  S. Vedantam, and A. Mallick, 2008, ‘Phase field simulation of grain growth in presence of mobile second phase   particles: A bi-crystal model’, Appeared in 10th Granada Seminar on Computational and Statistical Physics: Modeling and Simulation of New Materials, Spain.

9. A. Mallick, and S. Vedantam, 2008, ‘Effect of Grain Boundary Energy Anisotropy and Presence of Mobile Particles on         Grain Growth: A Phasefield Approach’, Phase-field-Simulations: Materials Science meets Biology and Medicine’, An International Focus Workshop, Max-Planck Institute, Germany (Poster presentation).

8. A. Mallick, S. Vedantam, and L. Lu, 2008, ‘Ultrafine Mg-3%Al alloy: Its synthesis and investigation of its tensile properties at elevated temperature’, Appeared in the proceeding of PMP III, Bangkok. 

7. A. Mallick, 2007, ‘Relations Among Axisymmetric Solutions of Annular Isotropic Plates With Linearly Varying Thickness     For Levinson and Kirchhoff Theories’, Appeared in the Proc. of Int. Conference on Theoretical, Applied, Computational, and Experimental Mechanics, December, IIT Kgp.

6. A. Mallick, 2005, ‘Exact bending relationship between higher-order Levinson and thin plate solutions for an axisymmetric annular plate with linearly varying thickness’, Appeared in the Proc. of Int. Conference on Mech. Engg., AM-48, 1-6 (Dhaka).

5. A. Mallick, R. Sharma, 2004, ‘FE Analysis of Bending for an Axisymmetric Shear Deformable Circular Plate’, Appeared in the Proc. of National Conference on Precision Manufacturing, Dec., 2004.

4. A. Mallick, 2004, ‘Solution Zone for a Lamina of Graphite/Epoxy (Gy-70/934) with Combined Loading’, Appeared in the Proc. of National Conference on Fabrication and Processing of Composites and Light Materials (FPCL 2004), Jan, 2004

3. A. Mallick, and R. Kumar, 2003, ‘Axisymmetric Levinson Annular Plates with Linearly Varying Thickness in Terms of Corresponding Kirchhoff Solutions’, Appeared in the Proc. of 48th Congress of Indian Society for Theoretical Applied Mechanics (An Int. Meet), December.

2. G.P. Dubey, P.C. Dumir, and A. Mallick, 2001, ‘Axisymmetric Buckling of Unsymmetrically Laminated Thick Truncated Conical Cap’, Appeared in the Proc. of 12th Indian Society of Mechanical Engineers (ISME) Conference.

1. P.C. Dumir, G.P. Dubey, and A. Mallick, 2000, ‘Galerkin Solution For Geometrically Non-linear Response of Thick Symmetrically Laminated Annular Plate’, Appeared in the Proc. of International Conference on Recent Advances in Mathematical Sciences (ICRAMS).