Publications

Journal articles

• 1. Virendra Talele, Mahesh Suresh Patil, Satyam Panchal, Roydon Fraser, Michael Fowler, "Battery thermal runaway propagation time delay strategy using phase change material integrated with pyro block lining: Dual functionality battery thermal design", Journal of Energy Storage, Volume 65, 2023, 107253 (doi.org/10.1016/j.est.2023.107253 )

  2. Virendra Talele, Uğur Moralı, Mahesh Suresh Patil, Satyam Panchal, Karvinkoppa Mathew, "Optimal battery preheating in critical subzero ambient condition using different preheating arrangement and advance pyro linear thermal insulation", Thermal Science and Engineering Progress, 2023, 101908 (doi.org/10.1016/j.tsep.2023.101908 )

  3. Virendra Talele, Mahesh Suresh Patil, Satyam Panchal, Roydon Fraser, Michael Fowler, Seeta Ratnam Gunti, "Novel metallic separator coupled composite phase change material passive thermal design for large format prismatic battery pack", Journal of Energy Storage, Volume 58, 2023, 106336 (doi.org/10.1016/j.est.2022.106336 )

  4. Khan, Shahid Ali; Eze, Chika; Dong, Kejian; Shahid, Ali Raza; Patil, Mahesh Suresh; Ahmad, Shakeel; Hussain, Iftikhar; Zhao, Jiyun, "Design of a new optimized U-shaped lightweight liquid-cooled battery thermal management system for electric vehicles: A machine learning approach", International Communications in Heat and Mass Transfer, Volume 136, July 2022, 106209 (doi.org/10.1016/j.icheatmasstransfer.2022.106209 )

  5. Behi, Hamidreza; Karimi, Danial; Kalogiannis, Theodoros; He, Jiacheng; Patil, Mahesh Suresh; Muller, Jean-Damien; Haider, Anita; Van Mierlo, Joeri; Berecibar, Maitane., "Advanced hybrid thermal management system for LTO battery module under fast charging", Case Studies in Thermal Engineering, Volume 33, May 2022, 101938 (doi.org/10.1016/j.csite.2022.101938 )

  6. Gonzalez-Aguirre E., Gastelurrutia J., Patil M. S., Portillo-Valdes L., “Avoiding Thermal Issues During Fast Charging Starting with Proper Cell Selection Criteria”, Journal of The Electrochemical Society, 2021, 168, 110523  (doi.org/10.1149/1945-7111/ac3348 )

  7. Behi H., Karimi D., Youssef R., Patil M. S., Mierlo J. V., Berecibar M., “Comprehensive Passive Thermal Management Systems for Electric Vehicles”, Energies 2021, 14, 3881 (doi.org/10.3390/en14133881 )

  8. Behi H., Kalogiannis T., Patil M. S., Mierlo J. V., Berecibar M., “A new concept of air cooling and heat pipe for electric vehicles in fast discharging”, Energies 2021, 14, 6477 (doi.org/10.3390/en14206477 )

  9. Patil M. S., Seo J. –H., Lee M. -Y., “A Novel Dielectric Fluid Immersion Cooling Technology for Li-ion Battery Thermal Management”, Energy conversion and management, Volume 229, 1 February 2021, 113715 (doi.org/10.1016/j.enconman.2020.113715 )

  10. Mahesh Suresh Patil, Jae-Hyeong Seo, Cheon-Myeong Kim, Ji-Young Lee,  Moo-Yeon Lee, Numerical study on magneto-acoustic thermal characteristics of micro-speaker for mobile phones, International Journal of Heat and Mass Transfer, Volume 164, 2020, 120479. (https://doi.org/10.1016/j.ijheatmasstransfer.2020.120479)  

  11. Mahesh Suresh Patil, Jae-Hyeong Seo, Satyam Panchal, Moo-Yeon Lee, Sensitivity Analysis of Influencing Factors on Liquid Cooling with Double Cold-plate for 20 Ah Lithium-ion Pouch Cell, International Journal of Energy Research, 2020, 1-27 (https://doi.org/10.1002/er.5946 )

  12. Kunal Sandip Garud, Mahesh Suresh Patil, Jae-Hyeong Seo, You-Ma Bang, Chong-Pyo Cho, Moo-Yeon Lee, Electrical Performance Comparison between Conventional Pi Shaped and Linear Shaped Thermoelectric Generators,IOP Conference Series: Materials Science and Engineering, 894, 1, 012001 (https://doi.org/10.1088/1757-899X/894/1/012001 )

  13. Mahesh Suresh Patil, Jae-Hyeong Seo, Satyam Panchal, Sang-Won Jee, Moo-Yeon Lee, Investigation on thermal performance of water-cooled Li-ion pouch cell and pack at high discharge rate with U-turn type microchannel cold plate, International Journal of Heat and Mass Transfer, Volume 155, 2020, 119728.  (doi.org/10.1016/j.ijheatmasstransfer.2020.119728)

  14. Kunal Sandip Garud, Jae-Hyeong Seo, Mahesh Suresh Patil, You-Ma Bang, Young-Dug Pyo, Chong-Pyo Cho & Moo-Yeon Lee, Thermal–electrical–structural performances of hot heat exchanger with different internal fins of thermoelectric generator for low power generation application, Journal of Thermal Analysis and Calorimetry (2020) (doi.org/10.1007/s10973-020-09553-7)

  15. Moo-Yeon Lee, Namwon Kim, Jae-Hyeong Seo, and Mahesh Suresh Patil, Thermal Abuse Behavior of the LIR2450 Micro Coin Cell Battery Having Capacity of 120 mAh with Internal Short Circuit by Penetrating Element, Symmetry 2020, 12(2), 246 (doi.org/10.3390/sym12020246)

  16. Kunal Sandip Garud, Mahesh Suresh Patil, Jae-Hyeong Seo, You-Ma Bang, Chong-Pyo Cho and Moo-Yeon Lee, Electrical Performance Comparison between Conventional Pi Shaped and Linear Shaped Thermoelectric Generators, Materials Science Forum

  17. Gihan Ekanayake; Mahesh Suresh Patil; Jae-Hyeong Seo; Moo-Yeon Lee, Numerical Study of the Fin Geometry on the Heat Transfer Characteristics of 72V ECU Heatsink for an Electric Three-wheeler, Journal of Mechanical Science and Technology 33 (3) (2019) 1451-1462 (doi.org/10.1007/s12206-019-0247-8)

  18. Mahesh Suresh Patil, Jae-Hyeong Seo, Namwon Kim, Moo-Yeon Lee, Transient numerical investigation on cold plate based water cooling system for battery module with large lithium-ion pouch cells, IOP Conf. Series: Materials Science and Engineering 455 (2018) 012050 (http://iopscience.iop.org/article/10.1088/1757-899X/455/1/012050/pdf)

  19. Mahesh Suresh Patil, Satyam Panchal, Namwon Kim and Moo-Yeon Lee, Cooling Performance Characteristics of 20 Ah Lithium-Ion Pouch Cell with Cold Plates along Both Surfaces, Energies 2018, 11(10), 2550; (https://doi.org/10.3390/en11102550)

  20. Gihan Ekanayake, Mahesh Suresh Patil, Jae-Hyeong Seo and Moo-Yeon Lee, Numerical Study on Heat Transfer Characteristics of the 36V Electronic Control Unit System for an Electric Bicycle, Energies 2018, 11(10), 2506; doi:10.3390/en11102506 (http://www.mdpi.com/1996-1073/11/10/2506/htm)

  21. Ki. Hyun Kim, Mahesh Suresh Patil, Jae Hyeong Seo, Chan Jung Kim, Gee Soo Lee, Moo Yeon Lee, Parametric study on heat transfer characteristics of waste heat recovery heat exchanger for automotive exhaust thermoelectric generator, International Journal of Engineering & Technology, 7 (2.33) (2018) 6-10 (https://www.sciencepubco.com/index.php/ijet/article/view/13837)

  22. Mahesh Suresh Patil, Chong-Pyo Cho, Moo-Yeon Lee, Numerical Study on Thermal Performances of 2.0 kW Burner for the Cabin Heater of an Electric Passenger Vehicle, Applied Thermal Engineering. (https://www.sciencedirect.com/science/article/pii/S1359431117357496)

  23. Mahesh Suresh Patil, Jae-Hyeong Seo, Dae-Wan Kim, Chan-Jung Kim, Gee-Soo Lee, Ki-Hyun Kim and Moo-Yeon Lee, Thermo-fluid Simulation for the Thermal Performances of the 72V ECU Cooling System with Heatsink for a Light Electric Vehicle, Journal of Advanced Research in Dynamical and Control Systems, Vol 10 Issue 3, pages 199-210. (http://www.jardcs.org/abstract.php?archiveid=2979)

  24. MS Patil, JH Seo, MY Lee, Numerical Study on Geometric Parameter effects of Power Generation Performances for Segmented Thermoelectric Generator, International Journal of Air-Conditioning and Refrigeration, (https://doi.org/10.1142/S2010132518500049)

  25. Jae-Hyeong Seo, Mahesh Suresh Patil, Chong-Pyo Cho, Moo-Yeon Lee, Heat transfer characteristics of the integrated heating system for cabin and battery of an electric vehicle under cold weather conditions, International Journal of Heat and Mass Transfer, Volume 117, 2018, Pages 80-94, ISSN 0017-9310. (https://doi.org/10.1016/j.ijheatmasstransfer.2017.10.007)

  26. YM Bang, JH Seo, MS Patil, CP Cho, MY Lee. Numerical Study on Thermal Performances of Multi Heat Source Heating System Using Butane for Electric Vehicle. Journal of The Korea Academia-Industrial cooperation Society, 2016, 17, 725-731 (http://jkais99.org/journal/Vol17No10/p83/vol17no10p83.htm)

  27. Mahesh Suresh Patil, Jae-Hyeong Seo, Moo-Yeon Lee, Heat transfer characteristics of the heat exchangers for refrigeration, air conditioning and heat pump systems under frosting, defrosting and dry/wet conditions—A review, Applied Thermal Engineering, Volume 113, 25 February 2017, Pages 1071-1087 (https://doi.org/10.1016/j.applthermaleng.2016.11.107)

  28. Patil, M.S.; Seo, J.-H.; Kang, S.-J.; Lee, M.-Y. Review on Synthesis, Thermo-Physical Property, and Heat Transfer Mechanism of Nanofluids. Energies 2016, 9, 840. doi: 10.3390/en9100840 (http://www.mdpi.com/1996-1073/9/10/840)

  29. MS Patil, JH Seo, YM Bang, MY Lee, Analysis of Factors Influencing on Heat Transfer Characteristics of Automobile LED Headlamp, International Journal of Control and Automation 9 (5), 263-272 (http://www.sersc.org/journals/IJCA/vol9_no5/25.pdf)

  30. Patil, M.S.; Kim, S.C.; Seo, J.-H.; Lee, M.-Y. Review of the Thermo-Physical Properties and Performance Characteristics of a Refrigeration System Using Refrigerant-Based Nanofluids. Energies 2016, 9, 22. doi: 10.3390/en9010022 (http://www.mdpi.com/1996-1073/9/1/22)

• Conference/Proceedings/Presentations

  1. Patil M. S., “SELFIE project: SELF-sustained and Smart Battery Thermal Management Solution for Battery Electric Vehicles”, Innovation and Industrialization Challenges for Next-Generation EV Components, 3rd March 2022 (Key-note speaker for SELFIE Project) (ihecobatt.eu/archivos/5859 )

  2. Patil M. S., Behi H., Kalogiannis T., Steinhoff B., Stelter E-M., Sonnenberger R., Bramberger R., Casella M., Mierlo J. V., Berecibar M., “Advanced Hybrid Battery Thermal Management System for Fast Charging of Electric Vehicles”, Transport Research Arena 2022, Lisbon (Abstract accepted for presentation) (traconference.eu/ )

  3. Aguirre E. G., Aranburu I., Gastelurrutia J., Diaz L., Patil M. S., Valdes L. d-P., “Sizing Analysis for Thermal Management System”, AEIT 2021 International Annual Conference 

  4. Garud K.S., Patil M. S., Seo J. -H., Bang Y.-M., Cho C.-P., “Electrical Performance Comparison between Conventional Pi Shaped and Linear Shaped Thermoelectrical Generators”, The 8th International Conference on Material Science and Engineering Technology, ICMSET 2019, October 19-21, 2019, Nanyang Technological University, Singapore

  5. Kunal Sandip Garud, Mahesh Suresh Patil, Jae-Hyeong Seo, Chong-Pyo Cho and Moo-Yeon Lee, Thermoelectric Performance Analysis of Annular Thermoelectric Generator under Influences of Geometrical Parameter and Operating Condition, KSME Busan chapter conference, Pusan National University, 10th May 2019, Busan, South Korea

  6. Garud K.-S., Patil M. S., Seo J. -H., Lee M. -Y., and Jeon E.-C., “Improvement of Heat Recovery Performance According to Guide Fins of Heat Exchanger for Automotive Thermo-electric Generator Application”, Proceedings of the Korean Society of Mechanical Engineers (KSME) Autumn Annual Meeting 2017, 23 November 2018, Dong-A University, Busan, Korea

  7. Mahesh Suresh Patil, Gihan Ekanayake, Jae-Hyeong Seo, Moo-Yeon Lee, Numerical Study on the Heat Collector Pipes for Heating of a Building Using Geothermal Energy, Korea Society of Geothermal Energy Engineers (KSGEE) 2017, Seoul National University of Science and Technology, KSGEE 2017, 29-31

  8. Jae-Hyeong Seo, Gihan Ekanayake, Mahesh Suresh Patil, Dae-Wan Kim, Moo-Yeon Lee, Studies on the Physical and Thermal Characteristics of the Ferrofluid with Magnetic Field Conditions based on Polarity of Magnet, KAIS 2017, Jeju, Korea, 12 December 2017

  9. Mahesh Suresh Patil, Jae-Hyeong Seo, Jong-Yeol Kim, Moo-Yeon Lee, Numerical Analysis of Ball Check Valve Behavior under Transient Flow Conditions, Proceedings of 4th International Conference on GST 2017, December 1 - 2, 2017, Jeju National University, Jeju Island, Korea, 12 December 2017

  10. Gihan Ekanayake, Mahesh Suresh Patil, Jae-Hyeong Seo, Chong-Pyo Cho, Moo-Yeon Lee, Numerical study on performance characteristics of the automotive exhaust base heat exchanger, Proceedings of the KSME Fall Annual Meeting 2017, Silla University, Busan, Republic of Korea, 24 November 2017, Page 33-34

  11. Mahesh Suresh Patil, Jae-Hyeong Seo, Dae-Wan Kim, You-Ma Bang, Ki-Hyun Kim, Chan-Jung Kim, Gee-Soo Lee, Chong-Pyo Cho, Moo-Yeon Lee, Numerical Investigation on the Power Generation Performance of Thermoelectric Generator, KSAE (The Korean Society of Automobile Engineers) Annual Autumn Conference and Exhibition 2017, Yeosu, South Korea, November 17-18, 2017 (Numerical_Investigation_on_the_Power_Generation_Performance_of_Thermoelectric_Generator)

  12. JH Seo, MS Patil, MY Lee, Experimental Study on the Thermal Behavior Characteristics of Ferrofluid in U-Tube, Proceedings of the KSME 2017 Annual Meeting, November 1-3, 2017, ICC Jeju, Jeju, Republic of Korea. (Experimental_Study_on_the_Thermal_Behavior_Characteristics_of_Ferrofluid_in_U-Tube)

  13. JH Seo, MS Patil, MY Lee, A Study on the Temperature Characteristics of LED Using Oil Cooling Technology, Korean Society of Mechanical Engineers (KSME) 2017 Spring Conference, Busan, South Korea (A_Study_on_the_Temperature_Characteristic_of_LED_Using_Oil_Cooling_Technology)

  14. G Ekanayake, MS Patil, JH Seo, MY Lee, Study on cooling performance enhancement in 72V ECU heat sink of the neighborhood electric vehicle, KSAE 2017 Spring conference

  15. YM Bang, JH Seo, MS Patil, G Ekanayake, YJ Doh, GS Lee, JK Yeom,  MY Lee, Study on Performance Characteristics in Thermoelectric Module with Variations of Exhaust Gas and Ambient Temperatures, Korean Society of Mechanical Engineers (KSME) Busan chapter 2017, Busan, South Korea

  16. JH Seo, MS Patil, DW Kim, YM Bang, MY Lee, Numerical Study on the Cooling Performances of Various Cooling Methods for Laminated Type Battery, Proceedings of the Asian Conference on Thermal Sciences 2017, 1st ACTS March 26-30, 2017, Jeju Island, Korea (Numerical_Study_on_the_Cooling_Performances_of_Various_Cooling_Methods_for_Laminated_Type_Battery)

  17. MS Patil, YM Bang, JH Seo, DW Kim, MY Lee, Heat Transfer Characteristics of Electronic Control Unit Heatsink For 72V Neighborhood Electric Vehicle, Proceedings of the Asian Conference on Thermal Sciences 2017, 1st ACTS March 26-30, 2017, Jeju Island, Korea (Heat_Transfer_Characteristics_of_Electronic_Control_Unit_Heatsink_For_72V_Neighborhood_Electric_Vehicle)

  18. YM Bang, JH Seo, MS Patil, CP Cho, MY Lee, Numerical Study on Heating Performance of Hybrid Combustion Air Heater with Variation of Fuels, International Conference on Mechanical and Materials Engineering (MME2017), Tokyo, Japan, 165

  19. MS Patil, JH Seo, YM Bang, DW Kim, G Ekanayake, HM Kim, YH Choi, MY Lee, A Novel Design for Lithium ion Battery cooling using Mineral Oil, The 3rd International Mega-Conference on Green and Smart Technology (GST 2016), Vol 141, 164-168 (http://onlinepresent.org/proceedings/vol141_2016/34.pdf)

  20. YM Bang, JH Seo, MS Patil, CP Cho, MY Lee, Numerical Study on Thermal Performances of Multi Heat Source Heating System Using Butane for Electric Vehicle, Journal of the Korea Academia-Industrial cooperation Society 17 (10), 725-731

  21. MS Patil, G Ekanayake, YM Bang, JH Seo, BH You, MY Lee, Numerical analysis of thermal performance characteristics of heat sink cooling device of 72V ECU with CD263 capacitors for light electric vehicle, 한국자동차공학회 추계학술대회 및 전시회, 604-604

  22. JH Seo, MS Patil, YM Bang, MY Lee, A study of cooling performance comparison between aluminum and aluminum powder as materials for the heat sink, The 5th Global Conference on Materials Science and Engineering (CMSE 2016), Tunghai University, Taiwan 

  23. MS Patil, YM Bang, JH Seo, DW Kim, HS Lee, MY Lee, Analysis and development of efficient cooling system for electric bicycle battery electronic control module, Proceedings of The 4th International Conference on Advanced Green and Smart Technology (AGST 2016), Qingdao Pullman Hotel, Qingdao, China, (June 27 – June 29, 2016) 

  24. YM Bang, MS Patil, DW Kim, JH Seo, MY Lee, Numerical study on the thermal performance of battery applying cell array guide for NEV, Proceedings of the Korean Society of Mechanical Engineers Proceedings of Thermal Engineering Division, pp 362-363  (Numerical_Study_on_the_Thermal_Performance_of_Battery_Applying_Cell_Array_Guide_for_NEV)

  25. YM Bang, JH Seo, MS Patil, CP Cho, MY Lee, 전기자동차용 부탄 연료 복합열원 히팅시스템의열적 성능에 관한 수치적 연구, 한국산학기술학회논문지 17 (10) 

  26. JH Seo, MS Patil, DW Kim, MY Lee, A Study on the Effect of Magnetic field intensity on Heat Transfer Performances of the Ferrofluid as Cooling Fluid for a Micro Cooling Device, The 6th International Conference on Convergence Technology in 2016, Jeju, Korea 

  27. YM Bang, DW Kim, JH Seo, MS Patil, MY Lee, The temperature performance of 18W LED mobile headlamp for electric vehicle, KSPSE 2016 conference, Jeju, South Korea (The Korean society for Power System Engineering) (The_temperature_performance_of_18W_LED_mobile_headlamp_for_electric_vehicle)

  28. YM Bang, MS Patil, CP Cho, WH Lee, MY Lee, Numerical investigation on thermal performance of the integrated cabin air heater and coolant source battery thermal management system for EV, SAREK Spring 2016 conference, Chungnam National University, Daejeon, South Korea 

  29. MS Patil, YM Bang, CP Cho, WH Lee, MY Lee, Numerical analysis on heat transfer characteristics of cabin air heater for heating of EV, SAREK Spring 2016 conference, chungnam national university, Daejeon, South Korea 

  30. YM Bang, JH Seo, MS Patil, MY Lee, Experimental Investigation on Illuminance and Heat Characteristics According to Various Power Control Conditions of LED for the Headlight of an Automobile, 7th International Conference on Mechanical, Industrial and Manufacturing Technologies 01 - 03 February 2016 / South Africa, Cape Town 

  31. MS Patil, JH Seo, YM Bang, DW Kim, Lee, Moo-Yeon, Heat transfer performance analysis of modified shell and tube heat exchanger for household fuel cell power generator, KAIS spring conference 2016, 128-129 (Heat_transfer_performance_analysis_of_modified_shell_and_tube_heat_exchanger_for_household_fuel_cell_power_generator)

  32. JH Seo, YM Bang, MS Patil, SH Jeong, CP Cho, MY Lee, Design and performance evaluation on the hybrid auxiliary heater for cabin heating and battery TMS of an Electric vehicle, Global Engineering & Applied Science Conference 2015, Tokyo, Japan 

  33. JH Seo, MS Patil, MY Lee, Cooling Design and Performance Evaluation of the Heat Sink for the LED Headlamp for an Automobile, Hong Kong International Conference on Engineering and Applied Science (HKICEAS) 

  34. JH Seo, YM Bang, MS Patil, SH Jeong, CP Cho, MY Lee, Investigation on Performance Characteristics of 2.0kW Combustion Heater using Air for a Cabin Heating of the Electric Vehicle, Proceedings of the Korean Society of Mechanical Engineers Conference 15 (0022)

  35. MS Patil, JH Seo, YM Bang, MY Lee, Experimental Study on the Performance Characteristics of an Air-Cooled LED Cooling System for Headlamp of a Passenger Vehicle,Advanced Science and Technology Letters 120 (GST2015), 648-654 (http://onlinepresent.org/proceedings/vol120_2015/128.pdf)