本分析軟體為主要用於坡面穩定分析，藉由簡化視窗互動可以依鑽探資料或鑽探報告所載及地質剖面圖。藉以建立分析所需之數值資料，同時依原有地質之各層面分佈建置，在地下水位之高依照前項所提之原理建構，同理如在坡面上使用土設計，亦需核算依先前設計選定之土釘大小，據以加以施加適度之外力。
軟体存放路徑
\\nas01\software\cad_soft\STEDWIN
使用注意事項
1. 需完整安裝後，並將USB KEY插入使用
英文安裝說明
Installation Notes for STEDwin Rev. B (February 2008)
Installing STEDwin using new ".msi" installer file
STEDwin is best installed using the the .msi installer file, which is the first menu option listed when the CDROM is started.
However, if the user modifies or deletes any of the files that are installed in the STEDwin program folder using the .msi installer (including changes to the example data files), then Windows will detect the changed files and may prompt the user to reinstall STEDwin to restore the files to their original condition. This will require the user to have access to the stedwin.msi file (either on the original CDROM or from a folder on the computer network to which the file has been copied from the CDROM). If the user does not have Admin rights, then this should not be a problem, since the user cannot alter the files in the STEDwin program folder anyway.
Also note that this version of the STEDwin.msi installer only creates shortcuts to STEDwin on the desktop and start menu for the person who installs STEDwin. The person installing the program should also copy the STEDwin shortcut to other users' desktops.
Installing the Sentinel SuperPro Keys
The drivers required for the Rainbow Sentinel Superpro keys (USB or parallel) must also be installed before you can run STEDwin Rev.b. To install the drivers, use the "Install Rainbow Drivers" menu option when the CDROM is inserted.
All USB Sentinel SuperPro keys need to be removed before installing or removing the Combo Installer. Otherwise, the USB portion of the installation might fail. For this reason, you should remove any USB SuperPro keys from the computer before performing the installation. If a user fails to heed this warning then you should have the user uninstall and re-install the Combo Installer without the USB key plugged in. This should repair the system and make the USB key operational.
Note: There is an alternate "legacy" setup.exe program for the Rainbow drivers on the CDROM in the ..\Legacy\Sentinel System Driver\ folder. You must specify the /usb parameter (i.e., setup.exe /usb) to install the drivers for the usb hardlock.
Installing STEDwin using old style Setup.exe and .CAB file
If you prefer, you can choose the use the older setup.exe program to install STEDwin by selecting the "Alternate setup.exe" menu item. You still need to separately install the Rainbow hardlock key drivers (USB or Parallel) using the "Install Rainbow Drivers" menu item.
About STEDwin
STEDwin is the smart editor for PCSTABL
Copyright © Harald W. Van Aller, P.E.
Annapolis Engineering Software
140 Overlook Drive
Queenstown, MD 21658 USA
phone: (410) 827-6097
fax: (775) 255-1921
e-mail: hvanaller@yahoo.com