The Linksys RE6300 Setup is straightforward because to the browser-based setup capability. However, especially if you are new to WiFi Range Extenders, you must carefully follow the setup instructions. If you need to reset the Linksys RE6300 after the setup, press and hold the reset button for approximately 10 seconds. After you've completed the reset, you can finish the Linksys RE6300 configuration by following the steps listed below. But before, make certain that you meet the following criteria:

• An active internet connection via wireless

• You know what the wireless network name (SSID) is and what the password is.

Linksys Extender Setup RE6300:

1. Connect your computer to the default SSID, which is "Linksys Extender Setup – xxx (final three characters of the Mac address)".

2. Open a web browser on your computer and go to the device's default IP address, 192.168.1.1.

3. Select "Start Setup" from the drop-down menu.

4. Select "As a wireless range extender" from the drop-down menu. After that, select your Wi-Fi network by clicking Next (SSID).

5. Click Next after entering the wireless network password in the required field.

6. You may now begin setting the range extender's extended wireless network to broadcast. Next should be selected.

7. If the Spot Finder suggests that the placement of the Linksys RE6300 is Just Right, go ahead and click Next.

8. Find a better site if the range extender is too far or too close.

9. Create an admin password for your wifi range extender to keep it safe. When you're finished, click Save.

10. By entering your email address in the required area and clicking Next, you can now register your product.