Alumni
Former Graduate Students
Aidan Moyers, Ph.D., Applying Molecular Dynamics Simulations to the Study of Micro Cold Spray of Yttria, 2023
Derek W. Davies, Ph.D., Systematic Study and Characterization of Silicon Carbide Films Produced via Micro Cold Spray, 2023
Matthew Crocker, MS, Influence of Spray Angle and Carrier Gas Type on Micro Cold Spray Deposition of Cu Coatings on AlN Substrates, 2023
Aditya Goyal, MS, Adhesion Energy Measurements for Silver Films on Alumina Using Micro- Cold Spray, 2023
Douglas Sassaman, Ph.D., Geometry Limitations in Indirect Selective Laser Sintering of Alumina (Co-supervised with Prof. J.J. Beaman), Fall 2021
Connor Gunsbury, MS, Design and Hybrid Additive Manufacturing for Electronic Components That Can Withstand Shock Loading (Co-supervised with C.C. Seepersad), Summer 2021
Lezli G. Matto Gonzalez , MS, Effect of Electrical Conductivity of Pure and Doped Lanthanum Chromite on the Onset of Selective Laser Flash Sintering, 2021
Deborah A. Hagen, Ph.D., Onset of Selective Laser Flash Sintering in 8YSZ, (Co-supervised by Prof. J.J. Beaman ), 2020
Jeremiah J. H. McCallister, Ph.D., Influence of Processing Parameters on Microstructure of Metal Films Produced from High Velocity Impact of Nanoparticle Aerosols, 2020
Joseph M. Nissen, MS, Methodology for Determining Design Rules for Helical Channels in Glass Components Produced via Selective Laser Sintering, (Co-supervised by Prof. J.J. Beaman), 2020
Alex Chen, MS, Local Temperature Distributions during Selective Laser Flash Sintering, (Co-supervised by Prof. J.J. Beaman), 2020
Andre Gouws, MS, Initial Stage Selective Laser Flash Sintering of Aluminum Nitride, (Co-supervised by Prof. J.J. Beaman), 2020
Nicholas C. Rahaim, MS, Modeling, Simulation, and Control of Stage One Selective Laser Flash Sintering of 8YSZ (Co-supervised with Prof. J.J. Beaman) 2020
Tushar V. Chitrakar, Ph.D., Predicting Deformation Mechanisms during High Speed Impact of Ag Nanoparticles, (Co-supervised by M.F. Becker) 2019
Cameron M. Knapp, Ph.D., Directed Energy Deposition Characterization and Modeling, 2018
Sergio A. Cortes, Ph.D., Energy Dissipation and Stiffness of Polymeric Matrix Composites with Negative Stiffness Inclusions, 2016
Michael D. Gammage, Ph.D., LAMA-Produced Metal-on-Oxide Nanoparticles and Films, 2016
Guillaume J. N. Noiseau, Ph.D., Study of Atomic-scale Mechanisms for Deposition of Nanostructured Films from Nanoparticles, 2015
Cameron M. Knapp, MS, Thermal Characterization of Direct Metal Deposition (Co-supervised by S. Landsberger), 2014
Daniel T. Hook, MS, Co-extrusion: A Feasible Method for Producing Negative Stiffness Inclusions, (Co-supervised by M.R. Haberman), 2013
Guillaume J. N. Noiseau, MS, Film Deposition and Mechanical Properties of Silver Produced by Impaction of Nanoparticles, 2012
Manuj Nahar, Ph.D., Highly Conductive, Nanoparticulate Thick Films Processed at Low Processing Temperatures, 2012
Michael A. Asoro, Ph.D., Coalescence and Sintering in Metallic Nanoparticles: In-situ Transmission Electron Microscopy (TEM) Study, (Co-supervised by P.J. Ferreira), 2012
James K. Mikulak, Ph.D., Size Effects in Out-of-plane Bending in Elastic Honeycombs Fabricated Using Additive Manufacturing: Modeling and Experimental Results, 2011
Kristopher L. Gleason, Ph.D., Engineering Nanocomposite Polymer Membranes for Olefin/Parafin Separation, (Co-supervised by M.F. Becker), 2011
Claire E. Davis, MS, An Electrostatic Approach for Producing Nanoparticulate Membranes Using Laser Ablation of Microparticle Aerosols, 2011
Manuj Nahar, MS, Oxide-Metal Nanoparticles using Laser Ablation of Microparticle Aerosols, 2009
Michael A. Asoro, MS, Size Effects on Melting of Silver Nanoparticles: In-Situ TEM Observations, (Co-supervised by P.J. Ferreira), 2009
Dat (James) Ma, Ph.D., Laser Processing of Tb0.3Dy0.7Fe1.92 Films, 2007
Andre D. Albert, Ph.D., Nanostructured Ag Produced by LAMA, 2007
Claudia Torres Garibay, PhD, Manufacture of Intermediate-Temperature Solid Oxide Fuel Cells using Novel Cathode Composition, 2007
James Ma, MS, 2003
Jue Wang, Ph.D., High Temperature Deformation of Al2O3/Y-TZP Particulate Composites and Laminates, 2003
Andre D. Albert, MS, Wetting Behavior of Reactive Metals on TiC, 2003
Gokul Malyavanatham, PhD, Structure and Compositional Studies of Multi-component Nanoparticles, (Co-supervised by M.F. Becker), 2002
Patrick J. Elverum, MS, Material Performance in Porous Ceramic Burners, (Co-supervised by J.L. Ellzey), 2002
Titash Sridharan, MS, Mechanical Properties of Mixed Ionic–Electronic Conductor SrCo0.8Fe2O3-δ, (Co-supervised by A. Manthiram), 2002
Jesus J. Gallegos III, MS, Chemical Vapor Deposition of TiC Coatings On Ta/TaC2 Substrates, 2001
M. Shane Noel, MS, Laser Chemical Vapor Deposition of TiC onto Ta Using Acetylene and Methane, 2001
Peyton W. Hall, MS, Processing and Fracture Resistance of a Highly Textured Alumina, 2000
Paul E. Rotsch, MS, The Role of Residual Stress on Crack Deflection in Oxide Laminates, 2000
Former Visitors and Postdoctoral Researchers
Nuria Cobo-Losey Rodríguez, Design and Testing of Negative Stiffness Inclusions, UT Exchange Student from ICAI School of Engineering, Comillas Pontifical University, Madrid, Spain; 2016
Koichiro Matsuu, Pre-cracking of Ceramic Fracture Mechanics Specimens Using Surface-Induced Compressive Stresses, Visiting student from Nihon University; 2015-2016
Etienne Coffy, Visiting student from Ecole Centralle de Lille, 2013
Charles Ciccarone, Visiting student from Ecole Centralle de Lille, 2013
Annie Morch, Visiting student from Ecole Centralle de Lille, 2012
Davy Ea, Visiting student from Ecole Centralle de Lille, 2012
Shreyas Rajasekhara, Optical Properties of SiC Films (Co-supervised with P.J. Ferreira), Postdoctoral Researcher, 2009.
Guilluame Noiseau, Visiting student from Ecole Centrale de Lille, France
Jue Wang, Processing of Er-doped SiO2, Postdoctoral Researcher, 2003
Sven Kerzenmacher, Visiting Student from Offenburg University of Applied Sciences, Germany, 2003
Prof. Atsushi Hashimoto, Visiting Professor, Nihon University, Japan 1999-2000
Stephane Lienard, Characterization of Si3N4/BN Fibrous Monolithic Ceramics using X-ray Diffraction, 1998
Guillermo Blazquez, Fracture Toughness Testing of Ceramics, 1998
Michael Saner, Fabrication of BaTiO3 Ceramics, 1998
Luis Lasa, Processing of Morphologically Textured Alumina, Visiting student from Universitat Politècnica de València, Spain, 1997-1998
Former Undergraduate Research Assistants
Arturo Hernandez, Physics BS Student, Model Experiments for Laser Ultrasonic Methods for Detecting the Onset of Sintering, 2021-22
Nicholas Papka, Mechanical Engineering BS Student; System for Controlling X-Y-Z stages for Microcold Spray, 2021
Ashley Poole, Mechanical Engineering BS Student; Glass Preforms using Indirect Selective Laser Sintering, 2020
Forest Miller, Mechanical Engineering BS Student, Additive Manufacturing of Rechargeable Batteries, 2019
Chiekezi (C.K.) Akagha, Mechanical Engineering BS Student, Laser Flash Sintering, 2018
Upayan Mathkari, Mechanical Engineering BS Student, Additive Manufacturing of Rechargeable Batteries, 2018
Rishan Chamdal, Mechanical Engineering BS Student, Aerosol Deposition of Multi-Material Devices, 2018
Erik Furton, Mechanical Engineering BS Student, Direct Writing of Thick Films by High Velocity Impaction, 2018
Kelly Bauman, Mechanical Engineering BS Student, Direct Writing of Thick Films by High Velocity Impaction, 2017
Robert Begbie, Mechanical Engineering BS student, Characterization of Ceramics produced by Additive Manufacturing, 2017
James Jenkinson, Mechanical Engineering BS student, Energy Dissipating Composite Materials, 2017
Derek Davies, Characterization of Ag Thick Films Produced by LAMA, Fall 2016-Spring 2017
Cheralyn Salone, Aerospace Engineering BS Student, Influence of Impaction Velocity on Film Microstructures Produced by LAMA, 2016
Alex Garn, Mechanical Engineering BS student, Influence of Impaction Velocity on Film Microstructures Produced by LAMA, 2016
Malcolm Hamilton, Mechanical Engineering BS student, Epitaxy in Ag Films Deposited by LAMA, 2016
Zachary Levine, Mechanical Engineering BS student, Oxide Films produced by LAMA, 2016
Chad Kassem, Mechanical Engineering BS student, A Study of Welded Ni-Cu Alloys, 2016
Jonathan Mackay, Mechanical Engineering BS student, Rheology of Extrudable Polymer/Metal Compounds, 2016
Will Skipper, Mechanical Engineering Visiting BS student, Design of a High Velocity Aerosol Impaction System, 2015
Monika Taneska, Mechanical Engineering Visiting BS student,Design of a High Velocity Aerosol Impaction System, 2015
Alejandro Barrios, Mechanical Engineering BS student, Characterization of the Rheological Properties of Extrudable Ceramic/Polymer Blends, 2015
Qi Chao Xie, Mechanical Engineering BS student, Correlations in Viscosities of Polymer-Ceramic Compounds Measured by Capillary Rheometry and Dynamic Mechanical Analysis, 2014
Lucas Henderson Mechanical Engineering BS student, (Co-supervised with M. Becker), An Improved Aerosol Feeder for LAMA, 2012
Alex Scheuermann, Electrical and Computer Engineering BS student,Fabrication of a Powder Aerosolizer with Feedback Control, 2011-2012
K. Blake Perez, Mechanical Engineering BS student, Production of Silver Feedstock Powders by Precipitation, 2011-2012
Eric Allcorn, Mechanical Engineering BS student, Surface Enhanced Raman Spectroscopy of Nanoparticles, 2009-2010
Michael Gammage, Physics BS Student, Development of an Optical Sensing System for Measuring Aerosol Powder Densities in situ, 2008
Elizabeth Hourigan, Mechanical Engineering BS student, Design, Fabrication, and Testing of a Feeder for Low Volume Flow Rate, High Density Aerosols, 2007
Chhavi Agarwal, Mechanical Engineering BS student, Design, Fabrication, and Testing of a Feeder for Low Volume Flow Rate, High Density Aerosols, 2007
Eric Chang, Mechanical Engineering BS student, Compounding of Extrudable Polymer/Ceramic Mixtures, 2005
Ezekiel Heikkala, Mechanical Engineering BS student, Design, Fabrication, and Testing of an Extruder for Fabricating Ceramic Microhoneycombs, 2004
William Malpica, Mechanical Engineering BS student, Design, Testing, and Validation of a High Density Aerosol Powder Feeder for Laser Ablation of Microparticles, 2003
Ricardo Hernandez, Mechanical Engineering BS student, Reducing the Particle Size of Magnetostrictive Terfenol, 2002
Thomas Loue, Visiting Engineering Student, Processing and Characterization of PZT Coatings, 2001
James Ma, Mechanical Engineering BS student, High Fracture Toughness Oxide Laminates by Pressureless Sintering, 2001
Bobby Knight, Mechanical Engineering BS student, Analysis of the Performance of Textured Alumina Subjected to a Sliding Contact Load, 2000
Michael Kammerdiener, Mechanical Engineering BS student, Processing and Testing of Superplastic Ceramic Laminates, 2000
George Messer, Mechanical Engineering BS student, Measuring Elastic Properties of Ceramics using Instrumented Hertzian Indentation, 1999
Baris Cezaroglu, Mechanical Engineering BS student, Measuring Elastic Properties of Ceramic Coatings using Instrumented Hertzian Indentation, 1999
Alan Shimshock, Mechanical Engineering BS student, Processing Al2O3/Al2TiO5 Laminate Composites, 1998.