Journal

[2020]

1. Yoon Seong Jeong, Jun Su Park, 2020, “Effect of Inlet Compound Angle of Backward Injection Film Cooling Hole,” Energies, 13(4)

DOI : https://doi.org/10.3390/en13040808

[2019]

1. Jun Su Park, Woosung Choi, 2019, “Heat and mass transfer characteristics on the first-stage gas turbine blade under unsteady wake flow,” International Journal of Thermal Sciences, 138, pp.314-321

DOI : https://doi.org/10.1016/j.ijthermalsci.2019.01.008

2. Park, S.; Moon, H.; Chung, H.; Park, J.S.; Cho, H.H. Effect of Manufacturing Tolerances on the Cooling Performance of Internal Rib Turbulated Passages. Heat Transfer Engineering 2019, 40, 418–428.

• DOI : https://doi.org/10.1080/01457632.2018.1432021

3. 박준수, 2019, "충북 및 충주 지역의 수소산업 생태계와 가능성," 한국교통대학교 융복합기술연구소 논문집 Vol.9

[2018]

1. Junepyo Cha, Mun Soo Chon, Seong-Hwa Choo and Jun Su Park. 2018, “Effects of Supply Power and Environmental Conditions on Urea Coolant Melting Phenomena in Urea Supply Lines in Vehicles,” Energies, 11, 99. 1099

DOI: https://doi.org/10.3390/en11051099

2. Minho Bang, Seok Min Choi, Ho-Seong Sohn, Jun Su Park, Hyung Hee Cho, 2018,“Effects of unsteady wakes on heat transfer of blade tip and shroud,” International Communications in Heat and Mass Transfer, 97, pp.125-135

DOI : https://doi.org/10.1016/j.icheatmasstransfer.2018.07.005

3. Sehjin Park, Hokyu Moon, Heeyoon Chung, Jun Su Park & Hyung Hee Cho, 2018, “Effect of Manufacturing Tolerances on the Cooling Performance of Internal Rib Turbulated Passages,” Heat Transfer Engineering

DOI : https://doi.org/10.1080/01457632.2018.1432021

[2017]

• 1. Seon Ho Kim, Kyeong Hwan Ahn, Jun Su Park, Eui Yeop Jung, Ki-Young Hwang, Hyung Hee Cho, 2017, “Local heat and mass transfer measurements for multi-layered impingement/effusion cooling: Effects of pin spacing on the impingement and effusion plate,” International Journal of Heat and Mass Transfer, 105, pp.712–722 DOI : http://dx.doi.org/10.1016/j.ijheatmasstransfer.2016.10.007

1. Heeyoon Chung, Ho-Seong Sohn, Jun Su Park, Kyung Min Kim, Hyung Hee Cho, 2017, “Thermo-structural analysis of cracks on gas turbine vane segment having multiple airfoils,” Energy, 118, pp.1275-1285 DOI : http://dx.doi.org/10.1016/j.energy.2016.11.005

[2016]

• 1. Mohsin Ali Badshah, Jonghyun Ju, Dongin Hong, Hyungjun Jang, Seok-min Kim, Jun Su Park, 2016, "Fabrication and characterization of glancing angle deposited nanostructured

  2. surfaces for enhanced boiling heat transfer," J. Vac. Sci. Technol. B 34(5) DOI : http://dx.doi.org/10.1116/1.4959837

1. Seok Min Choi, Hokyu Moon, Seon Ho Kim, Jun Su Park, Hyung Hee Cho, 2016, "The effects of thermal spreaders on reducing thermal cracks in heat recovery steam generators, " Applied Thermal Engineering, 108, pp.1251–1260 DOI : http://dx.doi.org/10.1016/j.applthermaleng.2016.08.003

   1. Minho Bang, Seok Min Choi, Jun Su Park, Hokyu Moon, Hyung Hee Cho, 2016, "Heat Transfer Characteristics on Blade Tip with Unsteady wake, " International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering Vol:10, No:5

   2. Seok Min Choi, Jun Su Park, Ho-Seong Sohn, Seon Ho Kim, Hyung Hee Cho, 2016, " Thermal Characteristics of Tube Bundles in Ultra-Supercritical Boilers," Energies, 9, pp.779 DOI : http://dx.doi.org/10.3390/en9100779

   3. 박준수, 2016, “전항력을 이용한 회전 블레이드 냉각성능 향상 방안 연구,” 한국교통대학교 융복합기술연구소 논문집, Vol. 6

2. 박준수, 2016, “2016 American Solar Challenge (ASC) 참관 및 World Solar Challenge 소개,” 한국태양광발전학회지, 2, pp,36-43 URL : http://www.dbpia.co.kr/Article/NODE07097437

[2015]

1. Hokyu Moon, Kyung Min Kim, Yun Heung Jeon, Sangwoo Shin, Jun Su Park, Hyung Hee Cho, 2015, “ Effect of Thermal Stress on Creep Lifetime for a Gas Turbine Combustion Liner,” Engineering Failure Analysis, 47, pp.34-40 DOI : http://dx.doi.org/10.1016/j.engfailanal.2014.10.004

2. Hokyu Moon, Kyung Min Kim, Jun Su Park, Beom Seok Kim, Hyung Hee Cho, 2015, “ Thermo‑mechanical analysis of an internal cooling system with various configurations of a combustion liner after shell,” Heat and Mass Transfer, 51, pp.1779-1790 DOI : http://dx.doi.org/10.1007/s00231-015-1532-4

3. Heeyoon Chung, Jun Su Park, Sehjin Park, Seok Min Choi, Dong-Ho Rhee, Hyung Hee Cho, 2015, "Augmented Heat Transfer with Intersecting Rib in Rectangular Channels having Different Aspect Ratios," International Journal of Heat and Mass Transfer, Vol 88, pp.357-367 DOI : http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015.04.033

4. 박준수, 2015, "열전달 향상을 위한 휜-핀 형상 및 휜-핀 딤플 복합 배열," 한국교통대학교 융복합기술연구소 논문집 Vol.5

[2014]

1. Jun Su Park, Dong Hyun Lee, Dong-Ho Rhee, Hyung Hee, Cho, Shin-Hyoung Kang, August 2014 "Heat transfer and film cooling effectiveness on the squealer tip of a turbine blade," Energy, 72, pp.331-343 DOI :http://dx.doi.org/10.1016/j.energy.2014.05.041

2. Jun Su Park, Eui Yeop Jung, Dong Hyun Lee, Kyung Min Kim, Beom Soo Kim, Byoung Moon Change, Hyung hee Cho, June 2014, "EFFECTS OF AN UNSTEADY WAKE ON HEAT TRANSFER OF ENDWALL SURFACE IN THE LINEAR CASCADE," ASME Heat Transfer, Vol. 136, pp. 061701-061708 DOI : https://dx.doi.org/10.1115/1.4026373

3. Kyung Min Kim, Hokyu Moon, Jun Su Park, Hyung Hee Cho, March 2014, “Optimal Design of Impinging Jets in an Impingement/effusion Cooling System,” Energy, Vol. 66, pp. 839-848 DOI : http://dx.doi.org/10.1016/j.energy.2013.12.024

4. Heeyoon Chung, Jun Su Park, Ho-Seong Sohn, Dong-Ho Ree, Hyung Hee Cho, June 2014, "Trailing Edge Cooling of a Gas Turbine Blade with Perforated Blockages with Inclined Holes," International Journal of Heat and Mass Transfer, Vol. 73, pp. 9-20 DOI : http://dx.doi.org/10.1016/j.ijheatmasstransfer.2014.01.062

[2013]

1. Jun Su Park, Sehjin Park, Kyung Min Kim, Beom Seok Choi, Hyung Hee Cho, September 2013,"Effect of the Thermal Insulation on Generator and Micro Gas Turbine System," Energy, Vol. 59, p.581-589 DOI : http://dx.doi.org/10.1016/j.energy.2013.07.019

[2012]

1. Kyung Min Kim, Jiwoon Song, Jun Su Park, Sanghoon Lee, Hyung Hee Cho, October 2012, “Material design of a film cooling system using experimental heat transfer data,” International Journal of Heat and Mass Transfer, Vol.55, Issue 21-22, p.6278-6284 DOI : http://dx.doi.org/10.1016/j.ijheatmasstransfer.2012.06.062

2. Dong Myeong Lee, Jun Su Park, Dong Hyun Lee, Sanghoon Lee, Beom Soo Kim, Hyung Hee Cho, June 2012, "Heat-Transfer Characteristics of a Non-Rotating Two-Pass Rectangular Duct With Various Guide Vanes in the Tip Turn Region," Journal of Turbomachinery, Vol.134, Issue 5, p.216-225 DOI : http://dx.doi.org/10.1115/1.4004860

3. In Taek Oh, Kyung Min Kim, Dong Hyun Lee, Jun Su Park, Hyung Hee Cho, January 2012," Local Heat/Mass Transfer and Friction Loss Measurement in a Rotating Matrix Cooling Channel," Journal of Heat Transfer, vol.134, Issue1, p.011901-011910 DOI : http://dx.doi.org/10.1115/1.4004853

[2011]

1. Kyung Min Kim, Jun Su Park, Dong Hyun Lee, Tack Woon Lee, Hyung Hee Cho, June 2011, "Analysis of conjugated heat transfer, stress and failure in a gas turbine blade with circular cooling passages," Engineering Failure Analysis, Vol. 18, Issue 4, pp. 1212-1222 DOI : http://dx.doi.org/10.1016/j.engfailanal.2011.03.002

2. Jun Su Park, Kyung Min Kim, Dong Hyun Lee, Hyung Hee Cho, Minking Chyu, April 2011, "Heat Transfer in Rotating Channel With Inclined Pin-Fins," Journal of Turbomachinery, Vol. 133, Issue 2, pp. 021003-1-021003-8 11 DOI : http://dx.doi.org/10.1115/1.4000553