Conference

[2016]

[1] Minho Bang, Seok Min Choi, Jun Su Park, Hokyu Moon, Hyung Hee Cho, 2016, “Heat transfer characteristics on blade tip with unsteady wake,” ICGTEP 2016, Adina Apartment Hotel Berlin Checkpoint Charlie, Berlin, Germany

[2] Minho Bang, Seok Min Choi, Ho-Seong Sohn, Hyung Hee Cho, Jun Su Park, 2016, “Heat/mass transfer on blade tip with various squealer tip configurations,” 7th International Symposium on Fluid Machinery and Fluids Engineering, Jeju lotte city hotel, Jeju, Korea

[2015]

[1] Seok Min Choi, Jun Su Park, Heeyoon Chung, Hyung Hee Cho, Byung Moon Chang, 2015, “Effect of Unsteady Wakes On Local Heat Transfer Of 1st Stage Blade Endwall,” ASME Turbo Expo 2015, Montreal, Canada

[2] Seon Ho Kim, Kyeong Hwan Ahn, Jun Su Park, Eui Yeop Jung, Hyung Hee Cho, Ki-Young Hwang, 2015, “Local Heat and Mass Transfer Characteristics for Multi-Layered Impingement/Effusion Cooling,” ASME Turbo Expo 2015, Montreal, Canada

[3] Heeyoon Chung, Jun Su Park, Ho-Seong Sohn, Hyung Hee Cho, Hee-Koo Moon, 2015, “Effects of misaligned combustor-turbine interface on heat transfer characteristics of turbine vane airfoil near endwall,” ASME-JSME-KSME Joint Fluids Engineering Conference 2015, Seoul, Korea

[4] Ho-Seong Sohn, Heeyoon Chung, Jun Su Park, Byung Moon Chang, Hyung Hee Cho, 2015, “Effect of aspect ratios on cooling of two-pass channel with bleed holes on tip surface,” ASME-JSME-KSME Joint Fluids Engineering Conference 2015, Seoul, Korea

[2014]

[1] Eui Yeop Jung, Jun Su Park, Sehjin Park, Ta-kwan Woo, Hyung Hee Cho, 2014. “Rotating effect on heat transfer of a concave surface by a staggered array impingement/effusion cooling,” Asian Congress on Gas Turbine 2014, Seoul, Korea

[2] Ho-Seong Sohn, Eui Yeop Jung, Jun Su Park, Byoung Moon Chang, Hyung Hee Cho, 2014, “Measurement of Static Pressure Distribution in Two-Pass Channel with Tip Bleed Holes on Tip Surface,” Asian Congress on Gas Turbine 2014, Seoul, Korea

[3] Seon Ho Kim, Kyeong Hwan Ahn, Eui Yeop Jung, Jun Su Park, Ki-Young Hwang, Hyung Hee Cho, 2014, “Total Cooling Effectiveness on Laminated Multilayer for Impingement/Effusion Cooling System,”Proceedings of ASME Turbo Expo 2014, Dusseldorf, Germany

[4] Heeyoon Chung, Jun Su Park, Sehjin Park, Seok Min Choi, Hyung Hee Cho, Dong-Ho Rhee, 2014, “Augmented Heat Transfer for Angled Rib with Intersecting Rib in Rectangular Channels of Different Aspect Ratios,” Proceedings of ASME Turbo Expo 2014, Dusseldorf, Germany

[5] Ho-Seong Sohn, Namgeon Yun, Jun Su Park, Hyung Hee Cho, Kyung Min Kim, Beom Soo Kim, Byung Moon Jang, 2014, “Heat Transfer in Rotating Two-Pass Channel with Bleed Holes on Tip Surface,” Proceedings of ASME Turbo Expo 2014, Dusseldorf, Germany

[6] Jun Su Park, Eui Yeop Jung, Hyung Hee Cho, 2014, “Heat Transfer Characteristics on Endwall Surface with Unsteady Wake Flow,” 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, HI, USA

[7] Heeyoon Chung, Jun Su Park, Ho-Seong Sohn, Dong-Ho Rhee, Hyung Hee Cho, 2014 “Detailed Measurement of Heat/Mass Transfer Distribution on an Angled Ribbed Channel with Intersecting Rib” 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, HI, USA

[2013]

[1] Ho-Seong Sohn, Heeyoon Chung, Jun Su Park, Hyung Hee Cho, 2013, “Heat Transfer Characteristics in Two-pass Channel with Bleed Holes in the Tip Surface,” 21st ISABE Conference, Busan, Korea

[2] Jun Su Park, Eui Yeop Jung, Dong Hyun Lee, Kyung Min Kim, Beom Soo Kim, Byoung Moon Change, Hyung hee Cho, 2013, "EFFECTS OF AN UNSTEADY WAKE ON HEAT TRANSFER OF ENDWALL SURFACE IN THE LINEAR CASCADE," Proceedings of the ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, USA

[3] Eui Yeop Jung, Chan Ung Park, Dong Hyun Lee, Jun Su Park, Sehjin Park, Hyung Hee Cho, 2013, "Effect of rotation on heat transfer of a concave surface with array impingement jet," Proceedings of ASME Turbo Expo 2013, San Antonio, Texas, USA

[4] Heeyoon Chung, Jun Su Park, Ho-Seong Sohn, Dong-Ho Rhee, Hyung Hee Cho, "Trailing edge cooling of a gas turbine blade with perforated blockages with inclined holes," Proceedings of ASME Turbo Expo 2013, San Antonio, Texas, USA

[2012]

[1] Kyeong Hwan Ahn, Jun Su Park, Eui Yeop Jung, Ki-Young Hwang, Minchan Kwon,Hyung Hee Cho, 2012, "EFFECT OF HEIGHT AND SPACING OF PIN-FIN ARRAY IN PERFORATED LAMINATEPLATE," the 8th International Symposium on Heat Transfer, Beijing, China

[2] Eui Yeop Jung, Sanghyun Oh, Dong Hyun Lee, Jun Su Park, Hyung Hee Cho,2012, "EFFECT OF IMPINGEMENT JET COOLING ON A STAGGERED PATTERNED FULL-COVERAGE FILM COOLING," 5th International Symposium on Fluid Machinery and Fluids Engineering, Jeju, Korea

[3] Jun Su Park, Eui Yeop Jung, Hee-Yoon Jung, Kyung Min Kim, Beom Soo Kim, Hyung Hee Cho, 2012 "Predict the Temperature Distribution and Thermal Failure of Turbine Blade," 5th International Symposium on Fluid Machinery and Fluids Engineering, Jeju, Korea

[4] Heeyoon Chung, Jun Su Park, Hokyu Moon, Sanghoon Lee, Hyung Hee Cho, 2012 "Conjugate Heat Transfer and Stress Analysis of Vanes in a Gas Turbine," ASIAN CONGRESS ON GAS TURBINES 2012, Shanghai, China, Paper No. ACGT2012-8053

[5] Jun Su Park, Dong Myeong Lee, Dong Hyun Lee, Sanghoon Lee, Beom Soo Kim, Hyung Hee Cho, 2012, "Effect of guide vanes in the tip turn region on heat/mass transfer of rotating two pass channel," Proceedings of ASME Turbo Expo 2012, Copenhagen, Denmark, Paper No. GT2012-69521

[2011]

[1] Dong Myeong Lee, Jun Su Park, Dong Hyun Lee, Beom Su Kim, Hyung Hee Cho, 2011, "Heat Transfer Characteristics of a Non-rotating Two-Pass Rectangular Duct with Various Guide Vanes in the Tip Turn Region," Proceedings of ASME Turbo Expo 2011, Vancouver, BC, Canada, Paper No. GT2011-45962

[2] Jun Su Park, Namgeon Yun, Hokyu Moon, Kyung Min Kim, Sin Ho Kang, Hyung Hee Cho, 2011., "Thermal Analysis of Cooling System in a Gas Turbine Transition Piece," Proceedings of ASME Turbo Expo 2011, Vancouver, BC, Canada, Paper No. GT2011-45961

[2010]

[1] Jun Su Park, Dong Hyun Lee, Dong-Ho Rhee, Hyung Hee, Cho, Shin-Hyoung Kang, 2010, "Heat Transfer and Effectiveness On The Film Cooled Tip And Inner Rim Surfaces Of A Turbine Blade," Proceedings of ASME Turbo Expo 2010, Glasgow, Scotland, UK, Paper No. GT2010-23203 ,

[2009]

[1] Jun Su Park, Dong Hyun Lee, Woo Jin Lee, Hyung Hee Cho, Dong-Ho Rhee, Shin-Hyung kang, 2009, "Heat/mass tansfer measurement on the tip surface of rotor blade with squlear rim," The 10th Asian International Conference on Fluid Machinery, Kuala Lumpur, Malaysia, Paper No. AICFM0001

[2] Jun Su Park, Dong Hyun Lee, Woo Jin Lee, Hyung Hee Cho, Dong-HO Rhee and Shin-Hyung Kang, 2009, "Heat Transfer Characteristics on Tip and Inner rim Surefaces of a Blade with Squealer Rim," Int. Symp. on Heat Transfer in Gas Turbine System, Antalya, Turkey

[3] InTack Oh, Kyung Min Kim, Dong Hyun Lee, Jun Su Park, Hyung Hee Cho, 2009, "Local Heat/Mass Transfer and Friction Loss Measurements in a Rotating Matrix Cooling Channels," Proceedings of ASME Turbo Expo 2009, Orlando, Florida USA, Paper No. GT2009-59873

[4] Jun Su Park, Kyung Min Kim, Dong Hyun Lee, Hyung Hee Cho and Minking Chyu, 2009, “Heat Transfer in Rotating channel with Inclined Pin-Fins,” Proceedings of ASME Turbo Expo 2009, Orlando, Florida USA, Paper No. GT2009-59741

[2008]

[1] Jun Su Park, Kyung Min Kim, Dong Hyun Lee, Hyung Hee Cho, Minking K. Chyu, 2008, "Heat/Mass Transfer Characteristics on Rotating Channels with Pin-Fin," The 7th JSME-KSME Thermal and Fluids Engineering Conference, Sapporo, Japan

[2] Jun Su Park, Kyung Min Kim, Dong Hyun Lee, Hyung Hee Cho, Minking K. Chyu, 2008, "HEAT TRANSFER ON ROTATING CHANNEL WITH VARIOUS HEIGHTS OF PIN-FIN," Proceedings of GT2008, Berlin, Germany, Paper No. GT2008-50783