Head torch
Empty cupboard
Telescope out to cool
Laptop and power. Boot.
Extension lead to pier and Sun Dial to Utility Room
Chair outside dinning room and check pier top
Mount 1 to chair
Mount bottom to pier
Bolt it on and adjust
Mount 2 to pier
Counter weight!
Box to pier. Plug in. USB to house. Switch on power.
GTO box to mount
Motor cables and hand controller.
Check counter weight, Telescope to mount.
Record 'visual time'
Cable to focuser. Remove 1.25 inch adapter / extension
Camera - plug in power lead extension, remove cap
Camera - plug into usb and connect to telescope
Plug in USB to computer
Power on mount + camera.
Start MaxIm DL
Set focus
GOTO star.
Add lens hood
Take 4 sec exposure. Pinpoint
If this struggles, use red dot finder / finder
GoTo star near object. Guider calibrate.
Focus run(s)
GoTo object. Take 4 sec exposure. Pinpoint.
Start guiding. Display graph
Set up exposure.
Record imaging setup time.
Start run. Record start temperature.
Record end imaging time
Stop guiding. Disconnect from planetarium.
Slew to zenith
Foil to telescope
Chair to telescope
Foil power. Switch on.
Take flats
Cool down camera
Focus to zero
Park scope
Disconnect all from observatory dialog
Switch off mount
Remove hand controller and motor cables
Disconnect camera.
Switch off camera
Remove camera
Pack up camera cables
Pack up GTO box
Switch off power to box. Box to house
Telescope to house
Counter weight to house
Mount 1 to house
Remove bolts, back off adjuster
Mount 2 to house
Sundial to mount
Extension lead to house.
Record packed up time
Shutdown computer.