Ij.start.canon/mg3250

Ij.start.canon/Mg3250 Wireless Connection Setup – Wireless Connection Setup Some accessibility factors (often referred to as routers or hubs) capabilities an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup. This lets permitted products this kind of as your Ij.start.canon/Mg3250 to attach on your network devoid of needing to enter a password, and it will allow a quickly and effortless process of connecting your products.

This technique is undoubtedly the easiest signifies of connecting your Printer MG3250 Wireless, so if your accessibility stage has a WPS button, please decide on the ‘WPS Connection Method’ tab below for directions on connecting producing use of this approach. If the router would not help WPS we have presented alternative suggestions to have your Ij.start.canon/Mg3250 linked so please decide on the ‘Standard Connection Method’ tab under.

• Go to Canon Support.

• Enter your Canon model in the box. When your model appears below the box, click it.

• Select Drivers & Downloads to the right of the image of your model.

• Select the Drivers, Software or Firmware tab depending on what you want to download. Software is used in the example below.

• Choose the Select button to the right of the software or driver file you wish to download. The Select button then becomes a Close button.

• Note Your software list may vary from the example you see here.

• Select Download to save the file to your computer.

To set up your Canon Pixma MG3250 printer wirelessly, follow the instructions given below.

• Check if the Canon Pixma MG3250 printer and the computer are turned On.

• Make sure that the wireless router is turned On.

• Download the printer driver from the official site of the printer or the installation CD provided with the package.

• Double-click on the Canon_IJ file to start the setup process.

• Click the Next button on the home screen of the installer.

• Choose the connection type as Wireless Connection on the Connection Method Selection page.

• Click the Connect to the network button.

• Now, press and hold the Maintenance button on the printer control panel for five seconds.

• After that, click the Next button on the setup screen.

• Once the wireless LED light starts to flash on the printer, click the Wireless Setup Using the USB cable or WPS button as per your wish.

• Follow the on-screen procedures to finish the Canon Pixma MG3250 printer setup.

• Power On your printer and follow the below steps to know how to connect Canon MG3250 printer to WiFi.

• Press the Wi-Fi button on the printer and hold the same until the Wireless light flashes.

• Once the light on your printer flashes blue, press the WPS button on the router.

• The blue light on your printer will remain flashing until the device gets connected to the wireless network.

• Choose the name of the network to which you are going to connect your printer from the LCD screen.

• Enter the passkey for your network and press OK. When the light remains light, it indicates that your printer has been connected to the network.

• Ensure that you connect your Canon printer and the system to the same wireless network. Reach our support team to know how to connect Canon Pixma printer to Wifi easily.