Journal

International Journal

[72] Ngoc Giang Tran, Doo-Man Chun, "Ultrafast and Eco-Friendly Fabrication Process for Robust, Repairable Superhydrophobic Metallic Surfaces with Tunable Water Adhesion", ACS Appl. Mater. Interfaces 2022, 14, 24, 28348–28358.

[71] A. G. Abd-Elrahim, and Doo-Man Chun, Kinetically induced one-step heterostructure formation of Co3O4-Ni(OH)2-graphene ternary nanocomposites to enhance oxygen evolution reactions, Journal of Alloys and Compounds, 2022, 906: 164159. 

[70] A. G. Abd-Elrahim, and Doo-Man Chun, One-step mechanical exfoliation and deposition of layered materials

(graphite, MoS2, and BN) by vacuum-kinetic spray process, Vacuum, 2022. 196): p. 110732.

[69] A. G. Abd-Elrahim, and Doo-Man Chun, Heterostructured Mn3O4-2D material nanosheets: One-step vacuum kinetic spray deposition and non-enzymatic H2O2 sensing, Ceramics International, 2021. 47(24): p. 35111-35123

[68] Ngoc Giang Tran, Doo-Man Chun, "Green manufacturing of extreme wettability contrast surfaces with superhydrophilic and superhydrophobic patterns on aluminum", Journal of Materials Processing Technology, 2021: p.117245. 

[67] A. G. Abd-Elrahim, and Doo-Man Chun, Facile one-step deposition of ZnO-graphene nanosheets hybrid photoanodes for enhanced photoelectrochemical water splitting. Journal of Alloys and Compounds, 2021. 870: p. 159430.

[66] A. G. Abd-Elrahim, and Doo-Man Chun, Room-temperature deposition of ZnO-graphene nanocomposite hybrid photocatalysts for improved visible-light-driven degradation of methylene blue. Ceramics International, 2021. 47(9): p. 12812-12825.

[65] A. G. Abd-Elrahim, and Doo-Man Chun., Facile one-step deposition of Co3O4-MoS2 nanocomposites using a vacuum kinetic spray process for non-enzymatic H2O2 sensing. Surfaces and Interfaces, 2020. 21: p. 100748 

[64] A. G. Abd-Elrahim, Doo-Man Chun, 2020, "Nanosized Co3O4–MoS2 heterostructure electrodes for improving the oxygen evolution reaction in an alkaline medium", Journal of Alloys and Compounds, Volume 853, 5 Feburary 2021, 156946. 

[63] A. G. Abd-Elrahim, Doo-Man Chun, 2020, "Fabrication of efficient nanostructured Co3O4-Graphene bifunctional catalysts: Oxygen evolution, hydrogen evolution, and H2O2 sensing", Volume 46, Issue 15, 15 October 2020, Pages 23479-23498.

62] Oyunchimeg Erdene-Ochir, Jing liu, Doo-Man Chun, 2020, "Effect of pulsed electric current on electrically assisted indentation for surface texturing ", Advanced Manufacturing Technology 111, 26 September 2020, Pages 283-293.

[61] The-Hung Dinh, Doo-Man Chun*, 2020, "Direct laser patterning for transparent superhydrophobic glass surfaces without any chemical coatings", Applied Physics A, Volume 126, Issue 6, Article 462 (SCIE, ISSN: 1432-0630)

[60] Ngoc Giang Tran, Doo-Man Chun*, 2020, "Simple and fast surface modification of nanosecond-pulse laser-textured stainless steel for robust superhydrophobic surfaces", CIRP Annals-Manufacturing Technology, Vol. 69, No. 1, pp. 525-528, May (SCIE, ISSN: 0007-8506).

[59] Mohaned M.M. Mohammed, A.G. Abd-Elrahim, Doo-Man Chun, 2020, "One-step deposition of a Ni(OH)2-graphene hybrid prepared by vacuum kinetic spray for high energy density hybrid supercapacitor", Materials Chemistry and Physics, Volume 244, pp 122701 (SCIE, ISSN: 0254-0584).

[58] A. G. Abd-Elrahim, Mohaned M. M. Mohammed, Doo-Man Chun, 2020, "Composition dependent electrocatalytic activity of Ni(OH)2-graphene hybrid catalyst deposited by one-step vacuum kinetic spray technique", Materials Chemistry and Physics, Volume 244, pp 122675 (SCIE, ISSN: 0254-0584).

[57] Mohaned Mohammed Mahmoud Mohammed, Doo-Man Chun, 2019, "Deposition of Ni(OH)2 on nickel substrate using vacuum kinetic spray and its application to high-performance supercapacitor", Journal of Materials Science: Materials in Electronics, Vol 30(18), pp. 17481-17490 (SCIE, ISSN: 0957-4522).  

[56] Mohaned Mohammed Mahmoud Mohammed, Doo-Man Chun*, 2019, "All-Solid-State Supercapacitor Based on MoS2–Graphite Composite Prepared by the Vacuum Kinetic Spray Method", Journal of Thermal Spray Technology, Vol. 28, Issue 5, pp. 963–973 (SCIE, ISSN: 1059-9630).

[55] Saddam Hossain, Won-Shik Chu, Caroline Sunyong Lee, Sung-Hoon Ahn, Doo-Man Chun*, 2019, "Photocatalytic performance of few-layer Graphene/WO3 thin films prepared by a nano-particle deposition system", Materials Chemistry and Physics, Vol. 226, pp. 141-150, (SCIE, ISSN: 0254-0584).

[54] Kyong-Min Lee, Hani Park, Jihun Kim, Doo-Man Chun*, 2019, "Fabrication of a superhydrophobic surface using a fused deposition modeling (FDM) 3D printer with poly lactic acid (PLA) filament and dip coating with silica nanoparticles", Applied surface science, Vol. 467-468, pp. 949-991, (SCI, ISSN: 0169-4332)

[53] The-Hung Dinh, Chi-Vinh Ngo, Doo-Man Chun*, 2018, "Controlling the Wetting properties of Superhydrophobic Titanium Surface Fabricated by UV Nanosecond Pulse Laser and Heat Treatment", Nanomaterials, Vol. 8, No. 10, pp. 766, (SCIE, ISSN: 2079-4991)

[52] Mohaned Mohammed Mahmoud Mohammed, Doo-Man Chun*, 2018,"Electrochemical Performance of Few-Layer Graphene Nano-Flake Supercapacitors Prepared by the Vacuum Kinetic Spray Method", Coatings, Vol. 8, No. 9, pp. 302, Aug 27, (SCIE, ISSN: 2079-6412)

[51] Chi-Vinh Ngo, Doo-Man Chun*, 2018, "Control of laser-ablated aluminum surface wettability to superhydrophobic or superhydrophilic through simple heat treatment or water boiling post-processing", Applied Surface Science, Vol. 435, pp. 974-982, Mar 15 (SCI, ISSN: 0169-4332).

[50] Huu-Duc Nguyen-Tran, Van-Tho Hoang, Van-Ta Do, Doo-Man Chun and Young-Jin Yum*, 2018, "Effect of Multiwalled Carbon Nanotubes on the Mechanical Properties of Carbon Fiber-Reinforced Polyamide-6/Polypropylene Composites for Lightweight Automotive Parts", Materials, Vol. 11, No. 3, pp. 429, Mar 15 (SCIE, ISSN 1996-1944).

[49] Dahyun Choi, Minji Lee, Hyungsub Kim, Won-shik Chu, Doo-Man Chun, Sung-Hoon Ahn, Caroline Sunyong Lee*, 2018, "Investigation of dry-deposited ion storage layers using various oxide particles to enhance electrochromic performance", Solar Energy Materials and Solar Cells, Vol. 174, pp. 599-606, Jan (SCI, ISSN: 0927-0248).

[48] Hrishikesh Das, Mounarik Mondal, Sung-Tae Hong*, Doo-Man Chun, and Heung Nam Han, 2018, "Joining and Fabrication of Metal Matrix Composites by Friction Stir Welding/Processing", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol.5, No. 1, pp. 151-172, Jan (SCIE,  ISSN: 2288-6206).

[47] Dahyun Choi, Minji Lee, Hyungsub Kim, Won-shik Chu, Doo-Man Chun, Sung-Hoon Ahn, Caroline Sunyong Lee*, 2017, "Fabrication of transparent conductive tri-composite film for electrochromic application", Applied Surface Science, Vol. 425, pp. 1006-1013, Dec 15 (SCI, ISSN: 0169-4332).

[46] Kyong‐Min Lee, Chi‐Vinh Ngo, Ji‐Young Jeong, Eun‐chae Jeon, Tae‐Jin Je and Doo‐Man Chun*, 2017, "Fabrication of an Anisotropic Superhydrophobic Polymer Surface Using Compression Molding and Dip Coating", Coatings, Vol. 7, No. 11, pp.194, Nov (SCIE, ISSN: 2079-6412)

[45] Sung-Tae Hong, Hrishikesh Das, Hyun-Seok Oh, Mohammad Nur E Alam Al Nasim, Doo-Man Chun*, 2017, "Combination of nano-particle deposition system and friction stir spot welding for fabrication of carbon/aluminum metal matrix composite joints of dissimilar aluminum alloys", CIRP Annals-Manufacturing Technology, Vol.66, No. 1, pp. 261-264, Aug (SCIE, ISSN: 0007-8506).

[44] Chi-Vinh Ngo and Doo-Man Chun*, 2017, "Fast wettability transition from hydrophilic to superhydrophobic laser-textured stainless steel surfaces under low-temperature annealing", Applied Surface Science, Vol. 409, pp. 232-240, Jul 1 (SCI, ISSN: 0169-4332).

[43] Mohammad Nur E. Alam Al Nasim, Doo-Man Chun*, 2017, "Formation of few-layer graphene flake structures from graphite particles during thin film coating using dry spray deposition method", Thin Solid Films, Vol. 622, pp. 34-40, Jan 31 (SCI, ISSN: 0040-6090).

[42] Mohammad Nur E. Alam Al Nasim, Doo-Man Chun*, 2017, "Substrate-dependent deposition behavior of graphite particles dry-sprayed at room temperature using a nano-particle deposition system" Surface & Coatings Technology, Vol 309, pp.172-178, Jan 15 (SCI, ISSN:  0257-8972).

[41] Chi-Vinh Ngo and Doo-Man Chun*, 2016, “Laser Printing of Superhydrophobic Patterns from Mixtures of Hydrophobic Silica Nanoparticles and Toner Powder”, Scientific Reports, Vol. 6, pp. 36735, Nov. (SCI, ISSN: 2045-2322).

[40] Sung-Ik Park, Ying-Jun Quan, Se-Heon Kim, Hyungsub Kim, Sooyeun Kim, Doo-Man Chun, Caroline S. Lee, Minoru Taya, Won-Shik Chu*, and Sung-Hoon Ahn*, 2016, “A Review on Fabrication Processes for Electrochromic Devices”, International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 4, pp. 397-421, Oct (SCIE, ISSN: 2288-6206).

[39] Van-Ta Do, Huu-Duc Nguyen-Tran, and Doo-Man Chun*, 2016, “Effect of polypropylene on the mechanical properties and water absorption of carbon-fiber-reinforced-polyamide-6/polypropylene composite”, Composite Structures, Vol. 150, pp. 240-245, May (SCIE, ISSN: 0263-8223).

[38] Won-Shik Chu, Min-Soo Kim, Ki-Hwan Jang, Ji-Hyeon Song, Hugo Rodrigue, Doo-Man Chun, Young Tae Cho, Seung Hwan Ko, Kyu-Jin Cho, Suk Won Cha, Sangkee Min, Sung Ho Jeong, Haedo Jeong, Choon-Man Lee, Chong Nam Chu, and Sung-Hoon Ahn*, 2016, "From Desing for Manufacturing (DFM) to Manufacturing for Desin (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 2, pp. 209-222, April (SCIE, ISSN: 2288-6206).

[37] Hyun-Seok Oh, Hak-Rae Cho, Hani-Park, Sung-Tae Hong, and Doo-Man Chun*, 2016, “Study of Electrically-Assisted Indentation for Surface Texturing” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 2, pp. 161-165, April (SCIE, ISSN: 2288-6206)

[36] Doo-Man Chun*, Chi-Vinh Ngo, and Kyong-Min Lee, 2016, “Fast fabrication of superhydrophobic metallic surface using nanosecond laser texturing and low temperature annealing”, CIRP Annals-Manufacturing Technology, Vol. 65, No. 1, pp. 519-522, Jan (SCIE, ISSN: 0007-8506).

[35] Maneesha Mishra, Hani Park, and Doo-Man Chun*, 2016, "Photocatalytic properties of Au/Fe2O3 nano-composites prepared by co-precipitation", Advanced Powder Technology, Vol. 27, No. 1, pp. 130-138, Jan (SCIE, ISSN: 0921-8831).

[34] Huu-Duc Nguyen-Tran, Hyun-Seok Oh, Sung-Tae Hong, Heung Nam Han, Jian Cao, Sung-Hoon Ahn, and Doo-Man Chun*, 2015, "A Review of Electrically-Assisted Manufacturing", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 2, No. 4, pp. 365-376, Oct (SCIE, ISSN: 2288-6206).

[33] Sung-Tae Hong*, Yong-Ha Jeong, Mahmudun Nabi Chowdhury, Doo-Man Chun, Moon-Jo Kim, Heung Nam Han (Submitted by S. I. Oh), 2015, "Feasibility of electrically assisted progressive forging of aluminum 6061-T6 alloy", CIRP Annals-Manufacturing Technology, Vol. 64, No. 1, pp. 277-280, Jun (SCIE, ISSN: 0007-8506).

[32] Chi-Vinh Ngo, Gaasuren Davaasuren, Hyun-Seok Oh, and Doo-Man Chun*, 2015, "Transparency and Superhydrophobicity of Cone-Shaped Micropillar Array Textured Polydimethylsiloxane", International Journal of Precision Engineering and Manufacturing, Vol. 16(7), pp. 1347-1353, Jun (SCIE, ISSN: 2234-7593).

[31] Maneesha Mishra, and Doo-Man Chun*, 2015, "α-Fe2O3 as a photocatalytic material: A review", Applied Catalysis A: General, Vol. 498, pp. 126-141, Jun (SCI, http://dx.doi.org/10.1016/j.apcata.2015.03.023).

[30] J. D. JANG, I. T. LEE, W. J. KIM and Doo-Man Chun*, 2015, "Effect of a Piston Hole under the Slip Control Condition of the Lock-up Clutch in a Torque Converter", International Journal of Automotive Technology, Vol. 16, No.1, pp. 139-144, Feb (SCIE, DOI: 10.1007/s12239−015−0015−4).

[29] Gaasuren Davaasuren, Chi-Vinh Ngo, Hyun-Seok Oh, Doo-Man Chun*, 2014, "Geometric Study of Transparent Superhydrophobic Surfaces of Molded and Grid Patterned Polydimethylsiloxane (PDMS)", Applied Surface Science, Vol. 314, pp. 530-536, Sept (SCI, DOI: 10.1016/j.apsusc.2014.06.170).

[28] Doo-Man Chun , Gaasuren Davaasuren, Chi-Vinh Ngo, Chung-Soo Kim, Gil-Yong Lee, Sung-Hoon Ahn*, 2014, "Fabrication of transparent superhydrophobic surface on thermoplastic polymer using laser beam machining and compression molding for mass production", CIRP Annals-Manufacturing Technology, Vol. 63, No. 1, pp. 525-528, Jun (SCIE, ISSN: 0007-8506).

[27] Won-Shik Chu, Doo-Man Chun, Sung-Hoon Ahn*, 2014, "Research Advancement of Green Technologies", International Journal of Precision Engineering and Manufacturing(IJPEM), Vol. 15, No. 6, pp. 973-977, Jun (SCIE, ISSN: 2234-7593).

[26] Doo-Man Chun, Chung-Soo Kim, Jung-Oh Choi, Gil-Yong Lee, Caroline S. Lee, Sung-Hoon Ahn*, 2014, "Multilayer deposition of ceramic and metal at room temperature using nanoparticle deposition system (NPDS) and planarization process", International Journal of Advanced Manufacturing Technology (IJAMT), Vol. 72, No. 1-4, pp. 41-46, Apr (SCIE, ISSN: 0268-3768).

[25]Sung-Hoon Ahn, Doo-Man Chun , Won-Shik Chu, 2013, "Perspective to Green Manufacturing and Applications", International Journal of Precision Engineering and Manufacturing(IJPEM), Vol. 14, No. 6, pp. 873-874(SCIE, ISSN: 1229-8557).

[24]Jae-Hoon Lee, Won-Jin Lee, Dong-Jae Shin, Gaasuren Daavasuren, Doo-Man Chun *, 2013, "Energy saving in line patterning using pulse laser by reducing overlapping rate with rectangular beam shape", International Journal of Precision Engineering and Manufacturing(IJPEM), Vol. 14, No. 6, pp 985-988 (SCI, ISSN: 1229-8557).

[23] Doo-Man Chun* , Sato Masashi, Isaku Kanno, 2013, "Precise measurement of the transverse piezoelectric coefficient for thin films on anisotropic substrate", Journal of Applied Physics (JAP), Vol. 113, No. 4, 044111, Jan. (SCI, ISSN: 0021-8979, http://dx.doi.org/10.1063/1.4789347).

[22] Doo-Man Chun , Jung-Oh Choi, Caroline S. Lee, Isaku Kanno, Hidetoshi Kotera, Sung-Hoon Ahn*, 2012, "Nano-particle deposition system (NPDS) : low energy solvent-free dry spray process for metal and ceramic films", International Journal of Precision Engineering and Manufacturing (IJPEM), Vol. 13, No. 7, pp. 1107-1112 (SCIE, ISSN: 1229-8557).

[21] Sung-Hoon Ahn, Jung-Oh Choi, Chung-Soo Kim, Gil-Yong Lee, Hyun-Taek Lee, Doo-Man Chun and Caroline Sunyong Lee, 2012, "Laser-assisted Nano Particle Deposition System and its Application for Dye Sensitized Solar Cell Fabrication," CIRP Annals - Manufacturing Technology, Vol. 61, No. 1, pp. 575-578 (SCIE, ISSN: 0007-8506 ).

[20] Min-Saeng Kim, Doo-Man Chun , Jung-Oh Choi, Jong-Cheon Lee, Yang Hee Kim, Kwang-Su Kim, Caroline Sunyong Lee, Sung-Hoon Ahn*, 2012, "Dry-spray deposition of TiO2 for a flexible dye-sensitized solar cell (DSSC) using a nano-particle deposition system (NPDS)," Journal of Nanoscience and Nanotechnology, Vol. 12, No. 4, pp. 3478-3482 (SCI, http://dx.doi.org/10.1166/jnn.2012.5576).

[19] Chun, D. M. , Choi, J. O.,Caroline S. Lee, Ahn, S. H.*, 2012, "Effect of stand-off distance for cold gas spraying of fine ceramic particles (< 5 μm) under low vacuum and room temperature using nano-particle deposition system (NPDS)," Surface and Coatings Technology, Vol. 206, No. 8-9, pp. 2125-2132, Jan. (SCI, doi:10.1016/j.surfcoat.2011.09.043, ISSN:0257-8972).

[18] Kim, M. S., Chun, D. M. , Choi, J. O., Lee, J. C., Kim, K. S., Kim, Y. H., Lee, C. S., and Ahn, S. H.*, 2011, "Room temperature deposition of TiO2 using nano particle deposition system (NPDS): Application to dye-sensitized solar cell (DSSC)," International Journal of Precision Engineering and Manufacturing (IJPEM), The Korean Society for Precision Engineering, (Korea), Vol. 12, No. 4, pp. 749-752, Aug. (SCIE, DOI: 10.1007/s12541-011-0099-3, ISSN: 1229-8557).

[17] Ahn, S. H.*, Chun, D. M. , Kim, C. S., 2011, "Nanoscale Hybrid Manufacturing Process by Nano Particle Deposition System (NPDS) and Focused Ion Beam (FIB)," CIRP Annals - Manufacturing Technology, Elsevier (Netherland), Vol. 60, No. 1, pp. 583-586, Apr. (SCIE, DOI: doi:10.1016/j.cirp.2011.03.071, ISSN: 0007-8506).

[16] Chun, D. M. , and Ahn, S. H.*, 2011, "Deposition mechanism of dry sprayed ceramic particles at room temperature using a nano-particle deposition system (NPDS)," Acta Materialia, Elsevier, Vol. 59, No.7, pp. 2693-2703, April (SCI, DOI: 10.1016/j.actamat.2011.01.007, ISSN: 1359-6454).

[15] Chun, D. M. , Lee, J. C., Yeo, J. C., Ahn, S. H.*, S. S. Hong, and J. D. Jang, 2011, "Capacity Estimation of Torque Converters with Piston Holes using Response Surface Method and Artificial Neural Net," International Journal of Automotive Technology, Korean Soc. Automotive Engineers, Vol. 12, No. 2, pp. 273-280 (SCIE, DOI:10.1007/s12239 011 0032 x, ISSN: 1229-9138).

[14] KyuBong Jung, WooJin Song, Doo-Man Chun , Jun-Cheol Yeo, Min-Saeng Kim, Sung-Hoon Ahn and Caroline Sunyong Lee*, 2010, "Coating of Ni powders through micronozzle in a nano particle deposition system," Metals and Materials International, Vol. 16, No. 3, pp. 465-467, Jun. (SCI, ISSN: 1598-9623).

[13] WooJin Song, KyuBong Jung, Doo-Man Chun , Sung-Hoon Ahn and Caroline Sunyong Lee*, 2010, "Deposition of Al2O3 Powder Using Nano-Particle Deposition System," Surface review and letters, Vol. 17, No. 2, pp. 189-193, Apr. (SCI, ISSN: 0218-625X).

[12] KyuBong Jung, WooJin Song, Doo-Man Chun , Jun-Cheol Yeo, Min-Saeng Kim, Sung-Hoon Ahn and Caroline Sunyong Lee*, 2010, "Computational fluid dynamics analysis of fabricated micronozzle for supersonic particle deposition," Surface review and letters, Vol. 17, No. 1, pp. 45-49, Feb. (SCI, ISSN: 0218-625X).

[11] Kyubong Jung, Woojin Song, Doo-Man Chun , Yang-Hee Kim, Jun-Cheol Yeo, Min-Saeng Kim, Sung-Hoon Ahn, and Caroline Sunyong Lee*, 2010, "Nickel Line Patterning Using Silicon Supersonic Micronozzle Integrated with a Nanoparticle Deposition System," Japanese Journal of Applied Physics, Institute of Pure and Applied Physics (IPAP) (Japan), 49, 05EC09 (SCI, ISSN: 0021-4922).

[10] Doo-Man Chun , Min-Saeng Kim, Jun-Cheol Yeo, Min-Hyeng kim, Sung-Hoon Ahn*, Caroline Sunyong Lee, 2010, "Nano/Micro particle beam for ceramic deposition and mechanical etching," Physica Scripta, IOP Publishing Ltd. (Sweden), Volume 2010, T139, 014047, Jun. (SCI, ISSN 0031-8949).

[9] Yun-Cheol Kang, Doo-Man Chun , Jun Yan, and Sung-Hoon Ahn*, 2010, "Computer-aided Environmental Design System for EuP Directive," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering, (Korea), Vol. 10, No. 3, pp. 397-406, Jun. (SCIE, ISSN: 1229-8557).

[8] Jae-Wook Lee, Jae-Chul Lee, Woon-Yong Choi, Doo-Man Chun , and Sung-Hoon Ahn*, 2010, "Design of repeat-antenna package for mobile communication made of ferrite-loaded glass-fabric/epoxy composites," Advanced composite materials, BRILL, Vol. 19, pp. 215-228, Jun. (SCIE, ISSN: 0924-3046).

[7] Woojin Song, Kyubong Jung, Doo-Man Chun , Sung-Hoon Ahn, and Caroline Sunyong Lee*, 2009, "Nanoparticle Deposition of Al2O3 Powder on Various Substrates," Materials Transactions, Japan Inst Metals, Vol. 50, No. 11, pp. 2680-2684, Oct (SCI, ISSN: 1345-9678).

[6] Jitendra Kumar Pandey, Min-Hyeng Kim, Doo-Man Chun , Caroline Sunyong Lee, and Sung-Hoon Ahn*, 2009, "Surface modification of polyethylene (PE) by the deposition of titanium dioxide (TiO2) nano-particles to enhance the photocatalytic activities," Surface review and letters Vol. 16, No. 2, pp. 259-263, Apr. (SCI, ISSN: 0218-625X).

[5] Beomkeun Kim, Yongsu Kim, Doo-Man Chun , Sung-Hoon Ahn*, and Jae-Duk Jang , 2009, "Durability improvement of automotive V-belt pulley ," International Journal of Automotive Technology, Korean Soc. Automotive Engineers(KSAE), Vol.10, No. 1, pp.73-77, Feb. (SCIE, ISSN: 1229-9138).

[4] Doo-Man Chun , Min-Hyeng Kim, Jae-Chul Lee, and Sung-Hoon Ahn* (Submitted by S. I. Oh), 2008, "TiO2 Coating on Metal and Polymer Substrates by Nano Particle Deposition System (NPDS)," CIRP Annals - Manufacturing Technology, TECHNISCHE RUNDSCHAU EDITION COLIBRI LTD (Switzerland), Vol. 57, No. 1, pp. 551-554, May. (SCIE, ISSN: 0007-8506).

[3] Doo-Man Chun , Min-Hyeng Kim, Jae-Chul Lee, and Sung-Hoon Ahn*, 2008, "A Nano-particle Deposition System for Ceramic and Metal Coating at Room Temperature and Low Vacuum Conditions," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering, in co-publication with Springer Verlag GmbH, Vol.9 No.1, pp.51-53, Jan. (SCIE, ISSN: 1229-8557).

[2] Jae-Chul Lee, Doo-Man Chun , Sung-Hoon Ahn*, and Caroline Sunyong Lee, 2007, "Material properties of thick aluminum coating made by cold gas dynamic spray deposition," Key Engineering Materials, Scientific, Vol. 345-346, pp. 1097-1100, April (DOI: 10.4028/www.scientific.net/KEM.345-346.1097).

[1] Doo-Man Chun , Hyong-Jung Kim, Jae-Chul Lee, Sung-Hoon Ahn*, and Jae-Duk Jang, 2007, "Web-based material database for material selection and its application programming interface (API) for CAD," Key Engineering Materials, Scientific, Vol.345-346, pp. 1593-1596, April (DOI: 10.4028/www.scientific.net/KEM.345-346.1593).

Domestic Journal (Korean)

[6] 천두만* , 안성훈, 2013, "차량 경량화를 위한 사출성형 유리섬유강화플라스틱의 온도 및 수분 흡수에 따른 기계적 물성 변화," 대한기계학회논문집A, 대한기계학회, Vol. 37, No. 2, pp. 199-204, 2월.

[5] 김형중, 이경태, 천두만, 안성훈*, 장재덕, 2008, "웹 기반 자동차용 스틸 풀리 설계 지원 시스템," 한국자동차공학회 논문집, 자동차공학회, Vol. 16, No. 6, pp. 1-7, 11월.

[4] 이재철, 천두만, 안성훈*, 여준철, 장재덕 , 2008, "토크컨버터 해석을 위한 다물체 자료 변환 프로그램 개발," 한국자동차공학회지, 한국자동차공학회, Vol. 16, No. 2, pp. 58-65, 3월.

[3] 천두만, 안성훈*, 2006, "인터넷 기반 설계 및 생산," 한국정밀공학회, Vol.23, No.3, pp.32-38, 3월, 특집.

[2] 천두만,안성훈*,장재덕, 2006, "웹기반 재료 데이터베이스 구축 및 자동차 엔진풀리 재료선정 예," 한국자동차공학회논문집, Vol.14, No.4, pp.107-pp.114, 7월.

[1] 안혜리*, 천두만,안성훈, 2005, "증강현실(Augmented Reality)기술을 활용한 미술교육," 미술교육논총, Vol.19, No.3, pp.455-474, 12월.