2023
Mohammad Imran Bappy, NG Tran, Doo-Man Chun, 2023 "Controlling Droplet Volume in Droplet Array Chips Using Different Size of Extreme Wettability Patterns and Dipping Process", International Conference of Precision Engineering and Sustainable Manufacturing (PRESM2023), July 16~21, Okinawa, Japan.
2019
Oyunchimeg Erdene-Ochir, Doo-Man Chun, 2019, "Study of durability of superhydrophobic coating on polypropylene", International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2019), July.12, Da Nang, Vietnam.
The-Hung Dinh, Doo-Man Chun, 2019, "Study of Fabrication process for Superhydrophobic Glass Surface", The International Symposium on Precision Engineering and Sustainable manufacturing (PRESM2019), 10-13th July, Da nang, Vietnam.
2018
Jihun Kim, Doo-Man Chun, 2018, "Study of superhydrophobic aluminum alloy surface fabricated by laser texturing and post-process", International Conference on Mechatronics Technology (ICMT2018), Oct.26-29, Jeju, Korea
Mohaned Mohammed Mahmoud Mohammed, Doo-Man Chun, 2018, “MoS2-Graphene Hybrid Supercapacitor Prepared by Dry Spray Coating”, The International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2018), 3-7th July, Sapporo Convention Center, Sapporo, Japan.
The-Hung Dinh, Doo-Man Chun, 2018, "Study of superhydrophobic titanium surface with effect of laser power and beam path", International Symposium on Precision engineering and Sustainable Manufacturing (PRESM2018), July 3 - July 7, SAPPORO, Japan
Saddam Hossain, Doo-Man Chun, 2018, “Fabrication of Graphene/WO3 Thin Film for Photocatalyst Using Nano-Particle Deposition System”, International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2018), 3-7 July, Sapporo Convention Center, Sapporo, Japan.
Oyunchimeg Erdene-Ochir, Doo-Man Chun, 2018, "Study of electric current effect on titanium substrate using hardness tester for electrically assisted indentation process", Korean Society of Precision Engineering (KSME2018), May.24, Ulsan, Korea
Doo-Man Chun, Oyunchimeg Erdene-Ochir, 2018, "Investigation of temperature effect on electrically assisted indentation of titanium surface", Korean Society of Mechanical Engineering (KSPE2018), May.10, Jeju, Korea.
2017
Chi-Vinh Ngo, and Doo-Man Chun, 2017, “Fabrication of superhydrophobic metallic surfaces using laser beam machining and heat treatment", The 10th MIRAI conference on Microfabrication and Green Technology, June 28, Hwabaek International Convention Center, Gyeongju, Korea.
Chi-Vinh Ngo, Doo-Man Chun, 2017, "Study of wettability of laser-ablated metallic surfaces under low-temperature annealing", International Symposium on Green Manufacturing and Applications (ISGMA 2017), June 27 - July 1, Hwabaek International Convention Center, Gyeongju, Korea.
Kyong-Min Lee, Hani Park, Doo-Man chun, Fabrication of superhydrophobic surface by 3D printing and dip coating (ISGMA 2017), June30-July 3, Hwabaek Covention Center, Gyeongju, Korea
Mohaned Mohammed Mahmoud Mohammed, Mohammad Nur E Alam Al Nasim, Doo-Man Chun, Electrochemical Performance of Supercapacitor Prepared by Dry Spray Coating, International Symposium on Green Manufacturing and Applications (ISGMA 2017), June30 – July 3, Hwabaek Convention Center, Gyeongju, Korea
Chi-Vinh Ngo, Doo-Man Chun, 2017, "Wettability control of laser-ablated aluminum surface by boiling water or low temperatrue annealing", 7th International Colloids Conference, June 18-21, Meliá Sitges Hotel Congress Center, Sitges, Barcelona, Spain.
2016
Doo-Man Chun, Chi-Vinh Ngo, Kyong-Min Lee, 2016, "Fast fabrication of superhydrophobic metallic surface using nanosecond laser texturing and low-temperature annealing", CIRP 66th General Assembly in Guimaraes, August 21-27, Portugal.
Chi-Vinh Ngo, Kyong-Min Lee, Doo-Man Chun, 2016, "Study of wettability transition of laser textured stainless steel surface with low temperature annealing", Advances in Functional Materials (AFM), August 8-11, International Convention Center (ICC), Jeju, Korea.
Hani Park, Young-Jin Yum, Won-Shik Chu, Caroline Sunyong Lee and Doo-Man Chun, 2016, "Fabrication of photocatalytic WO3 thin film using nano-particle deposition system", International Symposium on Green Manufacturing and Applications (ISGMA 2016), June 21-25, Bali Nusa Dua Convention Center, Bali, Indonesia.
Jing Liu, Huu-Duc Nguyen-Tran, Min-Gyu Kwon and Doo-Man Chun, 2016, "Effect of Pulsed Electric Current to Vickers Hardness of SUS304", International Symposium on Green Manufacturing and Applications (ISGMA 2016), June 21-25, Bali Nusa Dua Convention Center, Bali, Indonesia.
Chi-Vinh Ngo, Doo-Man Chun, 2016, "Superhydrophobic patterns from toner-silica mixture by direct laser printing for lab-on-chip applications', 6th International Colloids Conference, June 19-22, Maritim proArte Hotel Berlin, Berlin, Germany.
2015
Do -VanTa, Huu-Duc Nguyen-Tran, Doo-Man Chun, 2015,"Effect of polypropylene on the mechanical properties and water absorption of carbon fiber reinforced polyamide-6 composite", International Conference on Advances in Mechanics of Composite Materials and Structures (ICAMCMS 2015), October 21-23, Chung-Ang University, Chung-Ang University, Korea.
Sung-Tae Hong, Yong-Ha Jeong, Mahmudun Nabi Chowdhury, Doo-Man Chun, Moon-Jo Kim, Heung Nam Han/ S.I. Oh, 2015, "Feasibility of electrically assisted progressive forging of aluminum 6061-T6 alloy", CIRP 65th General Assembly in Cape Town, August 23-29, South Africa.
Mohammad Nur E AlamAl Nasim, Truong Quoc Vo, BoHung Kim, Young-Jin Yum, and Doo-Man Chun, 2015, "Study of Graphite Deposition using Nano-Particle Deposition System with Molecular Dynamics (MD) Simulation", International Symposium on Green manufacturing and Applications (ISGMA 2015), June 23-27, Shangri-La Hotel, Qingdao, China.
Chi-Vinh Ngo and Doo-Man Chun, 2015, "Study of Printable Superhydrophobic", International Symposium on Green manufacturing and Applications (ISGMA 2015), June 23-27, Shangri-La Hotel, Qingdao, China.
Yong-Ha Jeong, Sung-Tae Hong, Nabi, Doo-Man Chun, Mun-Jo Kim, Heong-Nam Han, 2015, "Upsetting of aluminum 6061-T6 alloys under a pulsed electric current",International Symposium on Green Manufacturing and Applications, June 23-27, Shangri-La Hotel, Chung-do, China.
Huu-Duc Nguyen-Tran, Hoang Van Tho, Young-Jin Yum, and Doo-Man Chun, 2015, "Evaluation of carbon nanotube and carbon fiber reinforced polymer composite for light weight automotive part", International Conference on Advances in Composite Materials and Structures (CACMS 2015), April 13-15, Istanbul Technical University, Turkey.
Hyun-Seok Oh, Yong-Ha Jeong, Young-Jin Yum,and Doo-Man Chun and Sung-Tae Hong, 2015, "Fabrication and Mechanical Properties of Graphite/Aluminum Composite Joint Using Friction Stir Spot Welding", The Minerals, Metals & Materials Society (TMS 2015) 144th ANNUL MEETING & EXHIBITION, MARCH 15-19, Orlando, FL, USA.
Sung-Tae Hong, Doo-Man Chun, Heong-Nam Han, Jian Cao, 2015, "Electroplasticity of light-weight metal alloys under a pulsed electric current and its industrial applications", PLASTICITY, DAMAGE & FRACTURE 2015, January 4-9, Jamaica, Montego Bay, USA.
2014
Chi-Vinh Ngo, Doo-Man Chun*, 2014, "Surface texturing for transparent superhydrophobic polymer surface using laser machining and molding", The 2nd International Conference on Bioinspired and Biobased Chemistry & Materials (NICE 2014), October 15-17, The Negresco hotel, Nice, France.
Doo-Man Chun, Gaasuren Davaasuren, Chi-Vinh Ngo, Chung-Soo Kim, Gil-Young Lee, Sung Hoon Ahn, 2014, "Fabrication of transparent superhydrophobic surface on thermplastic polymer using laser beam machining and compression molding for mass production", CIRP 64th General Assembly in Nentes, August 24-30, France.
Hak-Rae Cho, Hyun-Seok Oh, Hani Park, Doo-Man Chun*, 2014, "Energy Reduction in Indentation Process Using Electric Current for Surface Texturing", International Symposium on Green Manufacturing and Applications (ISGMA 2014), June 24-28, Paradise Hotel, Busan, Korea.
Huu-Duc Nguyen-Tran, Chi-Vinh Ngo, Hoang Van Tho, Young-Jin Yum* and Doo-Man Chun*, 2014, "Fabrication of Carbon Nanotube and Carbon Fiber Reinforced Hierarchical Polymer Composite for Light Weight Automotive Part", International Symposium on Green Manufacturing and Applications (ISGMA 2014), June 24-28, Paradise Hotel, Busan, Korea.
Hyun-Seok Oh, Yong-Ha Jeong, Jung-Hee Lee, Young-Jin Yum*,and Doo-Man Chun* and Sung-Tae Hong*, 2014, "Fabrication of graphite/aluminum composite joint using nano-particle deposition system and friction stir spot welding", International Symposium on Green Manufacturing and Applications (ISGMA 2014), June 24-28, Paradise Hotel, Busan, Korea.
Chi-Vinh Ngo, Gaasuren Davaasuren, Hyun-Seok Oh, Doo-Man Chun*, 2014, "Study of super-hydrophobicity with Micro-pillar Array on Transparent Polydimethylsiloxane(PDMS) Fabricated by Polymer Casting", International Symposium on Green Manufacturing and Applications (ISGMA 2014), June 24-28, Paradise Hotel, Busan, Korea.
Hyun-Seok Oh, Hak-Rae Cho and Doo-Man Chun , 2014, "Effect of Electric Current on Hardness of Metal for Electrically Assisted Manufacturing" The 9th International Confonference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET2014), January 6-10, Melbourne, Australia.
2013
Doo-Man Chun , Hyun-Seok Oh, Chi-Vinh Ngo, Gaasuren Davaasuren, Masashi Sato and Isaku Kanno, 2013, "Reliable measurement method of transverse piezoelectric coefficient for thin PZT films", 17th International Conference on Mechatronics Technology (ICMT 2013), October 15-18, Jeju Island, Korea
Gaasuren Davaasuren, Chi-Vinh Ngo, Hyun-Seok Oh and Doo-Man Chun , 2013, "Fabrication of Superhydrophobic Surface using Polymer Casting Method for Mass Production", 17th International Conference on Mechatronics Technology (ICMT 2013), October 15-18, Jeju Island, Korea
Gaasuren Davaasuren, Chi-Vinh Ngo, Hyun- Seok Oh, and Doo-Man Chun * , 2013, "Study of geometry of molded surface structure on polydimethylsiloxane (PDMS) for super-hydrophobic surface", International Symposium on Green Manufacturing and Applications (ISGMA 2013),June 25-29, Sheraton Waikiki Hotel, Honolulu, Ohau, Hawaii, USA
2012
Doo-Man Chun , 2012, "Effect of particle size for spraying ceramic particles in nano-particle deposition system (NPDS): deposition, surface treatment, and mechanical etching", 62nd CIRP General Asse mbly-part 2, August 23, Regal Airport Hotel, Hong Kong, China.
Sung-Hoon Ahn, Jung-Oh Choi, Chung-Soo Kim, Gil-Yong Lee, Hyun-Taek Lee, Doo-Man Chun , Caroline Sunyong Lee, 2012, "Laser-assisted Nano Particle Deposition System and its Application for Dye Sensitized Solar Cell", 62nd CIRP General Assembly, August 22, Regal Airport Hotel, Hong Kong, China.
Jae-Hoon Lee, Won-Jin Lee, Dong-Jae Shin, Gaasuren Davaasuren, Doo-Man Chun , 2012, "Energy Saving in Line Patterning Using Pulse Laer by Reducing Overlapping Rate with Rectangular Beam Shape",International Symposium on Green Manufacturing and Applications (ISGMA 2012), August 27, Ramada Plaza Jeju hotel, Jeju, Korea
2011
Doo-Man Chun , Chung-Soo Kim, Jung-Oh Choi, Caroline Sunyong Lee, and Sung-Hoon Ahn, 2011, "Metal and Ceramic Multi-layer Deposition at Room Temperature using Nano-Particle Deposition System (NPDS)", 4th International Conference of Asian Society for Precision Engineering and Nanotechnology, November 16-18, Langham Place Hong Kong Hotel, Hong Kong, China.
Chun, D. M. ,Kim, C. S.,Kim, H. J.,Choi, J. O.,Kim, D. H.,Jiseong Lee,Dong-Young Jang,Ahn, S. H., 2011, "Design for Energy Saving in Scan Controlled Focused Ion Beam Processing," International Symposium on Green Manufacturing and Applications (ISGMA 2011) , October 6-7 , Seoul National University ,Seoul , Korea.
Chun, D. M. , Choi, J. O., Lee, G. Y., Ahn, S. H.*, 2011, "Fabrication of semi-conductive oxide layer on polymer substrate for dye-sensitized solar cell using nano particle deposition system and laser treatment," International Symposium on Green Manufacturing and Applications (ISGMA 2011) October 6-7, 2011 Seoul National University, Seoul, KOREA.
Chun, D. M. , Choi, J. O., Caroline S. Lee, Isaku Kanno, Hidetoshi Kotera, Ahn, S. H.*, 2011, "Nano-particle deposition system (NPDS) : low energy solvent-free dry spray process for metal and ceramic films," International Symposium on Green Manufacturing and Applications (ISGMA 2011) October 6-7, 2011 Seoul National University, Seoul, KOREA.
Chun, D. M. , Kim, H. J., Yoon, H. S., Song, S. H., Ahn, S. H.*, 2011, "Study of multi-dimensional design approach for simultaneous consideration of functional and environmental requirements based on multiple criteria decision making," International Symposium on Green Manufacturing and Applications (ISGMA 2011), October 6-7, Seoul National University, Seoul, KOREA.
Ahn, S. H., Chun, D. M. , Kim, C. S., 2011, "Nanoscale Hybrid Manufacturing Process by Nano Particle Deposition System (NPDS) and Focused Ion Beam (FIB)," 61st CIRP General Assembly, CIRP, August 21-27, Budapest, Hungary.
2010
Kim, Y.H., Kim, K.S., Cho, D.G., Kim, M. S., Chun, D. M. , Lee, J. C., Ahn, S. H., and Lee, C.S.*, 2010, "Investigation of photovoltaic efficiency of dye sensitiezed solarcell fabricated by Nano Particle Deposition System (NPDS) bt varying thickness of sealing sheets," 2010 Materials Research Society fall meeting, November 29-December 3, Boston, MA, US.
Kim, Y.H., Shin, S.H., Kim, K.S., Lee, C.S.*, Kim, M. S., Chun, D. M. , and Ahn, S. H., 2010, "Fabrications of TiO2 Layers for Dye Sensitized Solar Cell using Nano-Particle deposition system (NPDS)," IUMRS-ICEM2010 (International Union of Materials Research Societies - International Conference on Electronic Materials 2010), August 22-27, KINTEX, Seoul, Korea.
Kim, Y.H., Kim, K.S., Cho, D.G., Kim, M. S., Chun, D. M. , Lee, J. C., Ahn, S. H., and Lee, C.S*, 2010, "Fabrication of Different Particle Size of TiO2 for Dye-Sensitized Solar Cell (DSSC) Using Nano Particle Deposition System (NPDS)," ENGE 2010 International Conference on Electronic Materials and Nanotechology for Green Environment, November 21-24, 2010, Ramada Plaza Jeju Hotel, Jeju Island, Korea.
Kim, M. S., Chun, D. M. , Lee, J. C., Kim, Y.H., Kim, K.S., Caroline Sunyong Lee, Ahn, S. H.*, 2010, "Dry-spray deposition of TiO2 for flexible dye-sensitized solar cell (DSSC) using nano particle deposition system (NPDS)," ENGE 2010 International Conference on Electronic Materials and Nanotechology for Green Environment, November 21-24, 2010, Ramada Plaza Jeju Hotel, Jeju Island, Korea.
Chun, D. M. , Kim, M. S., Yeo, J. C., Caroline Sunyong Lee, and Ahn, S. H.*, 2010, "Nano Particle Deposition System (NPDS) for Room Temperature Deposition of Metals and Ceramics," Joint International Symposia on 3rd Micro & Nano Technology and Micro/Nanoscale Energy Conversion & Transport-2010 (MNT&MECT 2010), Pacific Center of Thermal-Fluids Engineering & International Center for Heat & Mass Transfer, March 21-24, Seoul National University, Seoul, Korea.
2009
Chun, D. M. , Kim, M. S., Yeo, J. C., Lee, C. S., and Ahn, S. H.*, 2009, "Fabrication of conductive track in room temperature by nano particle deposition system (NPDS)," 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), November 11-13, Kitakyushu, Japan.
KyuBong Jung, WooJin Song, Chun, D. M. , Ahn, S. H., and Caroline Sunyong Lee*, 2009, "Computational fluid dynamics analysis of fabricated micronozzle using DRIE for supersonic particle deposition," The 3rd International Symposium on Functional Materials (ISFM 2009), Gyungsang National University, June 15-18, Dong-Bang Hotel, Jinju, Korea.
Woojin Song, Kyubong Jung, Chun, D. M. , Ahn, S. H., and Caroline Sunyong Lee*, 2009, "Deposition of Al2O3 powder Using Nano-Particle Deposition System," The 3rd International Symposium on Functional Materials (ISFM 2009), Gyungsang National University, June 15-18, Dong-Bang Hotel, Jinju, Korea.
K. B. Jung, W. J. Song, J. G. Kim , Chun, D. M. , Ahn, S. H., and C. S. Lee*, 2009, "Study of Supersonic Flow Behavior in Fabricated Micro-nozzle using 3-Dimensional Analysis," 2009 Materials Research Society spring meeting, April 13-17, San Francisco, CA, USA.
W. J. Song, K. B. Jung, Chun, D. M. , Ahn, S. H., J. G. Kim and C. S. Lee*, 2009, "Variation of Process Parameters to Control Profiles of Supersonic Micronozzle Using DRIE Process," 2009 Materials Research Society spring meeting, April 13-17, San Francisco, CA, USA.
Seong-Min JEONG*, Kwang-Jin KIM, Tae-Ui Hong, Jae-Hong Choi, Chun, D. M. and Ahn, S. H., 2009, "Building of a Web-Based Materials Database Supporting Ceramic Industry - Ceramics Bank," Materials Science & Technology 2009 Conference & Exhibition, 2009. 10.25-29 / David L. Lawrence Convention Center, Pittsburgh, Pennsylvania.
Chun, D. M. , Kim, M. S., Yeo, J. C., Kim, M. H., Ahn, S. H.*, 2009, "Nano/Micro particle beam for ceramic deposition and mechanical etching," The 3rd International Symposium on Functional Materials, June 15-18, Dongbang Hotel, Jinju, Korea.
2008
Chun, D. M. , Kim, M. H., Yeo, J. C., Hong, Y. S., Park, J. B. and Ahn, S. H.*, 2008, "MICRO ROBOT FOR CARDIOVASCULAR TREATMENT: STUDY ON CHRONIC TOTAL OCCLUSION (CTO) ," The 39th International Symposium on Robotics (ISR 2008), Institute of Control, Robotics and Systems & International Federation of Robotics, October 15-17, COEX, Seoul, Korea.
Chun, D. M. , Kim, M. H., Lee, J. C., and Ahn, S. H.*, 2008, "Nano particle deposition system (NPDS) for ceramic and metal coating at room temperature and low vacuum condition," 2008 International Conference on Smart Manufacturing Application (ICSMA), Institute of Control, Robotics and Systems (ICROS) and Korea Machine Tool Manufacturers' Association (KOMMA), April 9-11, KINTEX, Gyeonggi-Do, Korea.
Chun, D. M. , Kim, M. H., Lee, J. C., and Ahn, S. H.*, 2008, "TiO2 Coating on Metal and Polymer Substrates by Nano Particle Deposition System (NPDS)," The 58th CIRP General Assembly, CIRP (The International Academy for Production Engineering), August 24-30, Manchester, UK.
2007
Beomkeun Kim, Yongsu Kim, Chun, D. M. , Ahn, S. H.* and Jae-Duk Jang, 2007, "Fatigue life analysis of automotive V-belt pulley," 14th Asia Pacific Automotive Engineering Conference, Society of Automotive Engineers (SAE), August 5-8, Hollywood, California, USA.
Lee, J. W., Lee, J. C., Choi, W. Y., Chun, D. M. , and Ahn, S. H. , 2007, "Design of repeat-antenna package for mobile communication made of glass-fabric/epoxy/ferrite composite," 14th International Conference on Composite Structures(ICCS-14), Journal of Composite Structures, November 19-21, Melbourne, Australia.
Kim, H. J., Lee, K. T., Kim, J. S., Chun, D. M. , Ahn, S. H.*, and Jang J. D., 2007, "A study on Generalized Regression Neural Networks using Genetic Algorithm for Preliminary design of steel pulley," 3rd Korea-China Joint Conference on Geometric and Visual Computing (KCJC 2007), August 22-24, Seoul, Korea.
Chun, D. M. , Lee, J. C., Ahn, S. H.*, 2007, "Nano Particle Deposition System," 2nd HU-SNU Symposium on Mechanical and Aerospace Engineering, Department of Mechanical and Intelligent System Engieering, Hokkaido University and School of Mechanical and Aerospace Engineering, Seoul National University, January 26, 2007, Hokkaido University, Sapporo, Japan.
Lee, J. C., Chun, D. M. , and Ahn, S. H., 2007, "Material properties of thick aluminum coating made by cold gas dynamic spray deposition," 10th International Conference on the Mechanical Behavior of Materials, Korean Institute of Metals and Materials, Korean Society of Mechanical Engineers, May 27-31, 2007, BEXCO, Busan, Korea.
Chun, D. M. , Lee, J. C., Ahn, S. H.*, and Jang, J. D., 2007, "WEB-BASED MATERIAL DATABASE FOR MATERIAL SELECTION AND ITS APPLICATION PROGRAMMING INTERFACE (API) FOR CAD," 10th International Conference on the Mechanical Behavior of Materials, Korean Institute of Metals and Materials, Korean Society of Mechanical Engineers, May 27-31, 2007, BEXCO, Busan, Korea.
2006
Chun, D. M. , Ahn, S. H.*, J.D. Jang, 2006, "Web-based material database for material selection and its expansible architecture," International Conference of Mechanical & Automotive Technologys, 26-28 April, Chonbuk National University, Jeonju, Jeonbuk, Korea.
Chun, D. M. , Kim, H. J., Ahn, S. H.*, Bong-Hoon Oh, Gyu-Bong Lee, Jae-Duk Jang, 2006, "WEB-BASED DESIGN AND MANUFACTURING SUPPORT SYSTEM FOR AUTOMOTIVE STEEL PULLEY," 2006 International Symposium on Flexible Automation, July 10-12, Osaka, Japan.
Kim, H. J., Chun, D. M. , Ahn, S. H.*, Kim, Dong-Soo, Jun, Cha-Soo, and Wright, Paul K., 2006, "Web-based Design and Manufacturing System for Micro Machining," Transactions of the North American Manufacturing Research Institution, Vol. 34, pp. 349-355, May 1, Marquette University, Milwaukee, Wisconsin, USA.
Chun, D. M. , Kim, H. J., Ahn, S. H.*, Jang, J. D. and Lee, G. B., 2006, "SmartPulley : Web-based Design Support System for Automotive Steel Pulley," SAE2006 World Congress, Detroit, Michigan, USA, April 3-7.
2019
Doo-Man Chun* and Mohaned Mohammed Mahmoud Mohammed, 2019, “Deposition of Ni(OH)2 for supercapacitors using nano-particle deposition system”, Korean Society of Precision Engineering 2019 Spring Conference (KSPE 2019 Spring Conference), 15-17 May, Ramada Plaza Jeju Hotel, Jeju Island, Korea.
2018
Doo-Man Chun*, Mohammad Nur E Alam Al Nasim , Mohaned Mohammed Mahmoud Mohammed, and Sung-Tae Hong, 2018, “Graphite Deposition Using Nano-Particle Deposition System and its Applications”, Korean Society of Precision Engineering 2018 Fall Conference (KSPE 2018 Autumn Conference), 24-26 October 24, Gunsan Saemangeum Convention Center (GSCO), Gunsan, Korea.
Mohaned Mohammed Mahmoud Mohammed, Doo-Man Chun, 2018, “Effect of scan speed on the graphene supercapacitor prepared by dry spray coating”, Korean Society of Mechanical Engineering (KSME 2018), 24th May, University of Ulsan, Ulsan, Korea.
Jihun Kim, Doo-Man Chun, "Study of corrosion resistance of superhydrohobic aluminum alloy surface fabricated by laser texturing and post-process", The Korea Society of Mechanical Engineers(KSME2018), May 18, Seoul, Korea.
Doo-Man Chun* and Oyunchimeg Erden-Ochir, “Investigation of temperature effect on electrically assisted Indentation of titanium substrate”, Jeju Island of the Korean Society for Precision Engineering Conference (Ramada Plaza Jeju Hotel_KSPE 2018), May 09, Jeju Island, Korea.
2017
Chi-Vinh Ngo, and Doo-Man Chun*, “Study of superhdyrophobic pattern printing using a commercial laser printer”, Ulsan branch of the Korean Society of Mechanical Engineers Conference (Ulsan branch_KSME 2017), May 12, UNIST, Ulsan, Korea.
Kyong-Min Lee, Doo-man Chun*, Chi-Vinh Ngo, and Eun-Chae Jeon, “Study of anisotropic wettability on patterned polymer surface fabricated by compression molding with ultra-precision machining”, IT convergence sector in Spring of the Korean Society of Mechanical Engineers Conference (IT convergence sector_KSME 2017), May 11, University of Ulsan, Ulsan, Korea.
2016
Nasim Mohammad Nur E Alam, Choi Jun-Ho, Park Hani, Chu Won-Shik, Lee Sunyong, Chun Doo-Man, “Substrate dependent deposition behavior of micro-sized graphite particles using nano-particle deposition system”, Proceeding of Korean Society of Precision Engineering(KSPE) Spring Conference, OP10-PP930, 5월 11-13일, 2016, 라마다프라자 호텔, 제주
이경민,Chi-Vinh Ngo,천두만, 2016, "다이아몬드 포인트 바이트를 이용한 V홈 금형가공을 통한 초소수성 폴리머 표면 제조 (Fabrication of Superhydrophobic polymer with V-grooved mold using a single point diamond tool)", 한국정밀공학회 2016년도 춘계학술대회, 05월 13일, 라마다프라자제주 호텔, 제주
2015
박하니,최준호,추원식,이선영,천두만, 2015, "나노입자 적층시스템을 위한 50mm 폭의 슬릿 노즐 연구", 한국정밀공학회 2015년도 추계학술대회, 12월 16일, 하이원리조트 컨벤션호텔, 정선
Chi-Vinh Ngo,이경민,천두만, 2015, "레이저 빔 가공을 통한 금속표면의 적심성 변화 연구", 한국정밀공학회 2015년도 추계학술대회, 12월 18일, 하이원리조트 컨벤션호텔, 정선
정용하,홍성태,초드리 마흐무둔 나비,천두만,김문조,한흥남, 2015, "주기적 통전을 이용한 알루미늄 합금의 자유단조 성능향상에 관한 연구", 한국정밀공학회 2015년도 춘계학술대회, 5월 13일, 대한민국 제주도, 제주
2014
Maneesha Mishra,박하니, 천두만, 2014, "Au/Fe2O3 나노입자를 이용한 Methylene Blue 분해에서의 Au 농도 효과(Degradation of Methylene Blue Dye by Au/Fe2O3 Nano Powders: Effect of Au Concentration)", 한국정밀공학회 2014년도 추계학술대회, 10월 30일, 창원컨벤션센터, 창원.
오현석, Nasim Mohammad Nur EAlam Al, Chi-Vinh Ngo, Hoang Van Tho, 염영진, 천두만, 2014, "나노입자적층 시스템을 이용한 탄소소재 코팅연구 (Study of Carbon Deposition using Nano-Particle Deposition System)", 한국정밀공학회 2014년도 춘계학술대회, 5월 16일, 라마다프라자제주호텔, 제주.
Nguyen Tran Huu Duc, Chi-Vinh Ngo, Hoang Van Tho, 염영진, 천두만, "사출성형을 통한 CNT 및 Carbon fiber를 이용한 차량용 경량 복합 재료 제작 연구", 대한기계학회 생산 및 설계공학 부분 춘계학술대회, 4월 24-25일, 라마다프라자 제주호텔, 제주
2013
오현석, 조학래, 박하니, 천두만 2013, " 에너지 저감 표면 가공을 위한 전류에 의한 마그네슘 경도 감소 연구", 한국정밀공학회 2013 년도 추계학술대회, 10월 31일, BEXCO, 부산.
천두만, 최정오, 김충수, 이길용, 오현석, 이선영, 조규진, 안성훈, 2013, " 나노입자 적층 시스템을 이용한 세라믹 적층에서의 레이저 효과에 대한 연구 (Effect of Laser for Ceramic Deposition Using Nano-particle Deposition System (invited))", 한국세라믹학회 추계총회 및 연구발표회, 10 월 18 일, 제주국제컨벤션센터 (ICC Jeju), 제주.
2012
천두만* , 오현석, 안성훈, 2012, "나노입자 적층시스템에서 입자크기의 영향에 관한 연구", 한국정밀공학회 2012년 추계학술대회, 10월 26일, 광주과학기술원 오룡관, 광주.
천두만* , 안성훈, 2012, "나노입자 적층 시스템을 이용한 Al2O3 입자의 고속충돌에 의한 세라믹 입자적층 현상 연구", 한국입자에어로졸학회 학술대회,7월 5일, 용평리조트, 용평.
천두만* , 안성훈, 2012, "차량 경량화를 위한 사출성형 유리섬유강화플라스틱의 온도 및 수분흡수에 따른 기계적 물성 변화", 2012년도 대한기계학회 생산 및 설계부문 춘계학술대회, 6월 27일, 대전컨벤션센터, 대전.
천두만* , 2012, "나노 입자 적층 시스템을 이용한 상온에서의 금속 및 세라믹 박막 제작 및 응용 (Fabrication of metal and ceramic thin films at room temperature using nano-particle deposition system (NPDS) and its application)," 대한기계학회 2012년도 추계학술대회 울산지회, 5월 18일 (18일 발표), 울산대학교, 울산.
2011
천두만* , 윤해성, 송성혁, 김형중, 안성훈, 2011, "공학용 재료 선택을 위한 다차원 설계 기법 (Multi-dimensional design method for engineering material selection)," 대한기계학회 2011년도 추계학술대회, 11월 2-4일 (4일 발표), EXCO, 대구.
Doo-Man Chun , Masashi Sato, Ryuji Yokokawa, Isaku Kanno, Hidetoshi Kotera, and Osamu Tabata, 2011, "補償光?用?電MEMS形?可?ミラ?のストロ?ク向上に?する?究 (Enhancement of membrane mirror stroke of piezoelectric MEMS deformable mirrors for adaptive optics), The 28th SENSOR SYMPOSIUM on Sensors, Micromachines and Application Systems, IEEJ Sensors and Micromachine Society, Tower Hall Funabori, Tokyo, Sep. 26-27.
2010
천두만 , 김민생, 이종천, 최정오, 안성훈*, 2010, "나노 입자 적층 시스템에서의 공정조건에 따른 Al2O3 세라믹 입자의 적층 특성 변화 연구 (Study of the effect of process parameters in nano particle deposition system (NPDS) for Al2O3 powder deposition)," 한국정밀공학회 2010년도 추계학술대회, 11월 10-12일, 창원컨벤션센터, 창원.
천두만 , 김민생, 여준철, 이선영, 안성훈*, 2010, "나노 입자 적층 시스템을 이용한 Al2O3 세라믹입자의 고속충돌에 의한 적층 메커니즘 연구," 2010년도 한국세라믹학회 춘계 연구발표회, 한국세라믹학회, 4월 22~23일, 창원컨벤션센터, 창원.
김양희, 신상훈, 김광수, 김민생, 천두만 , 이종천, 안성훈, 이선영* , 2010, "나노 입자 적층 시스템을 이용하 TiO2 충의 염료감응태양전지(DSSC) 제조에 대한 연구," 2010년도 대한금속 재료학회 춘계 학술대회, 대한금속 재료학회, 4월 22~23일, 현대성우리조트, 횡성.
김민생, 천두만 , 이종천, 김양희, 신상훈,이선영, 안성훈*, 2010, "나노 입자 적층 시스템을 이용한 TiO2 세라믹의 상온 적층 : 염료감응형 태양전지 제작에 응용," 2010년도 한국세라믹학회 춘계 연구발표회, 한국세라믹학회, 4월 22~23일, 창원컨벤션센터, 창원.
2009
송우진, 정규봉, 천두만 , 안성훈 and 이선영*, 2009, "초음속 마이크로노즐에 적합한 프로파일을 위한 공정변수의 최적화 ," 한국재료학회 2009년도 춘계학술대회, 5월 21~22일, 무주리조트, 전북 무주.
정규봉, 송우진, 천두만 , 여준철, 안성훈 and 이선영*, 2009, "Deep RIE를 이용하여 제작된 마이크로 노즐 내에서 유체의 거동에 대한 컴퓨터 시뮬레이션 분석 ," 한국재료학회 2009년도 춘계학술대회, 5월 21~22일, 무주리조트, 전북 무주.
2008
천두만 , 김민형, 이재철, 안성훈*, 2008, "세라믹과 금속재료 코팅을 위한 나노입자적층 시스템," 대한기계학회 마이크로/나노공학부문 춘계학술대회, 대한기계학회, 5월 30일, 서울대학교 정밀기계설계 공동연구소, 서울.
김민형, 천두만 , 여준철, 홍영선, 박정빈, 안성훈*, 박종하, 류새희, 이선영, 2008, "관상동맥 내 CTO(Chronic Total Occlusion) 제거를 위한 드릴 툴 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 11~13일, 제주컨벤션센터, 제주.
이재철, 천두만 , 여준철, 안성훈, 장재덕, 2008, "유체-구조 해석을 위한 다물체 자료 변환 프로그램 개발 : 토크 컨버터의 예," 한국 CAD/CAM 학회 학술발표회, 한국 CAD/CAM 학회, 1월 31일~2월2일, 보광휘닉스파크 컨벤션센터, 평창.
천두만 , 이재철, 여준철, 이경태, 안성훈*, 장재덕, 2008, "토크 컨버터 록업 클러치의 전달 토크용량 예측 프로그램 개발," 한국 CAD/CAM 학회 학술발표회, 한국 CAD/CAM 학회, 1월 31일~2월2일, 보광휘닉스파크 컨벤션센터, 평창.
2007
김형중, 이경태, 천두만 , 안성훈*, 장재덕, 2007, "자동차용 스틸 풀리의 초기 설계를 위한 다층 신경망에 관한 연구," 한국 캐드캠 학회 하계 워크샵, 한국 캐드캠 학회, 8월 23일, 서울대학교, 서울.
김형중, 이경태, 김지석, 천두만 , 안성훈*, 장재덕, 2007, "스틸 풀리 초기 설계를 위한 일반화된 회귀 신경망에 관한 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 21~22일, 제주컨벤션센터, 제주.
강윤철, 천두만 , 여준철, 안성훈*, 2007, "EuP 대응 친환경 설계를 위한 재료 선정 시스템," 2007년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회, 1월 31일~2월 2일, 보광휘닉스파크 컨벤션센터, 강원도 평창.
2006
이재철, 천두만 , 안성훈, 장재덕, 2006, "유동해석 결과를 구조해석에 적용하는 다물체 자료 변환 프로그램 : 토크컨버터 해석의 예," 대한기계학회 추계학술대회, 대한기계학회, 11월 1일~3일, 무주리조트, 무주.
이재철, 천두만 , 안성훈, 장재덕, 2006, "유동해석 결과를 구조해석에 적용하는 자료 변환 프로그램 : 토크컨버터 해석의 예," 대한기계학회 춘계학술대회, 대한기계학회 , 6월 7일~9일, 제주 국제컨벤션센터(ICC제주), 제주.
김형중, 천두만 , 안성훈*, 황범철, 장재덕, 2006, "웹 기반 자동차용 엔진 풀리 설계 지원 시스템," 한국정밀공학회 2006, 춘계학술대회, 경주교육문화회관, 5월 18~19일.
이재철, 천두만 , 김성근, 안성훈, 2006, "초음속 저온분사법에 의한 알루미늄 분말 적층에서 얇은 모재에 발생하는 변형에 대한 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 18~19일, 경주교육문화회관, 경주.
김명현, 배준범, 백원중, 이윤석, 김휘준, 천두만 , 안성훈*, 2006, "웹 기반 베어링 선정 지원 S/W의 개발," 2006년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회, 보광휘닉스파크 컨벤션센터, 2월 9일~11일, 보광휘닉스파크 컨벤션센터, 강원도 평창.
천두만 , 김형중, 김휘준, 이재철, 안성훈*, 장재덕, 2006, "재료사용 정보를 포함한 웹기반 재료 데이터베이스의 구축 - 자동차용 부품의 예," 2006 한국 CAD/CAM 학회 학술발표회, 보광휘닉스파크 컨벤션센터, 2월 9일~11일.
2005
김형중, 천두만 , 안성훈*, 장재덕, 홍순석, 황범철, 2005, "자동차용 엔진 풀리 설계 변수의 상관관계 분석," 한국정밀공학회, 춘계학술대회, 6월, 라마다프라자 호텔, 제주도.
천두만 , 안성훈*, 2005, "웹기반 재료 DB 구축 및 3D 그래프를 사용한 물성비교," 한국정밀공학회, 춘계학술대회, 제주도(라마다프라자), 6월.