Grant

1. 機器學習方法搭配中厚板理論應用三維共振頻率以非破壞檢測方法進行壓電與正交性材料常數反算，主持人，計畫期間：22/08/01~24/07/31，委任單位：科技部(優秀年輕學者2年期研究計畫)。

Non-Destructive Evaluation to Inverse Calculation of Piezoelectric and Orthotropic Material Properties Based on Machine Learning Combined with Mindlin Plate Theory, PI, 22/08/01~24/07/31, Ministry of Science and Technology, R.O.C. (MOST 2-yrs Grant for Excellent Young Scholar)

2. 運用智慧型材料複合薄膜研究聲振耦合近場聲學元件與自動化光學聲振量測系統開發，主持人，計畫期間：21/08/01~24/07/31，委任單位：科技部(吳大猷先生紀念獎計畫)。

Vibration and Sound of Near-Field Acoustic Components Developed by Smart Materials Compounded with Diaphragm and Development of Automatic Optically Vibroacoustic Measurement System, PI, 21/08/01~24/07/31, Ministry of Science and Technology, R.O.C. (MOST Dr. Ta-Yu Wu Memorial Research Grant)

3. 多種鈍體影響壓電能量擷取振子之流體致振效果探討，主持人，計畫期間：20/08/01~21/07/31，委任單位：科技部(自由型擴充加值國際合作研究計畫)。

Enhancement of Energy Harvesting Performance By Omni-Directional Wind Funnel Coupled with Optimal Bluff Splitter Body Design, PI, 20/08/01~21/07/31, Ministry of Science and Technology, R.O.C. jointed by Malaysia. (Proactive MOST Add-on Grant for International Cooperation)

4. 運用超音波波導技術進行積層製造材料之缺陷與線上製程即時檢測，主持人，計畫期間：19/08/01~20/07/31，委任單位：科技部(自由型擴充加值國際合作研究計畫)。

Flaw Inspection and On-line Monitoring for Fuse Deposition Manufacturing in Defect by Ultrasound and Guided-Wave Technology, PI, 19/08/01~20/07/31, Ministry of Science and Technology, R.O.C. jointed by Korea. (Proactive MOST Add-on Grant for International Cooperation)

5. 風機混合振動控制器與能量擷取器之能源最佳化，主持人，計畫期間：18/12/01~19/07/31，委任單位：科技部(自由型擴充加值國際合作研究計畫)。

Energy Efficiency Optimization of Wind Turbine Generator with Hybrid Vibration Controller and Harvester, PI, 18/12/01~19/07/31, Ministry of Science and Technology, R.O.C. jointed by Malaysia. (Proactive MOST Add-on Grant for International Cooperation)

6. 異質材料積層製造之異向性力學與功能性梯度材料特性複合埋入式感測進行結構最佳化研究，主持人，計畫期間：18/08/01~21/07/31，委任單位：科技部(一般型3年期計畫)。

Theoretical Analysis and Experimental Measurements for the Additive Manufacturing Heterostructure on the Anisotropic Material and Functionally Graded Material Applied on Embedded Sensing for Optimization of Structure, PI, 18/08/01~21/07/31, Ministry of Science and Technology, R.O.C. (MOST 3-yrs General Research Grant)

7. 利用壓電纖維與邊界設計降頻開發流體致振之壓電能量擷取系統，主持人，計畫期間：18/08/01~21/07/31，委任單位：科技部(一般型3年期計畫)。

Flow Induced Vibration for Lower Frequency of Piezoelectric Energy Harvester Based on Piezoelectric Fiber Composite and Designs of Boundary Conditions, PI, 18/08/01~21/07/31, Ministry of Science and Technology, R.O.C. (MOST 3-yrs General Research Grant)

8. 利用流固耦合以二相流分析方法探討蒸汽產生器之熱交換管的暫態應力特性，主持人(18/01/01~18-06/30)轉共同主持人(18/07/01~18/12/31)，計畫期間：18/01/01~18/12/31，委任單位：科技部(原子能科技學術合作代辦研究計畫)。

Stress Analysis of Heat Exchanger Used on Steam Generator Based on Fluid-Structure Interaction of Two-Phase Flow, PI on 18/01/01~18/06/30, to Co-PI on 18/07/01~18/12/31, Ministry of Science and Technology, R.O.C. (MOST-Nuclear Technology Cooperative Research Grant)

9. 以光彈法量測鋼材銲道殘留應力之實驗力學特性研究，主持人，計畫期間：17/01/01~17/12/31，委任單位：科技部(原子能科技學術合作代辦研究計畫)。

Determination on Residual Stress of Steel Welding by Photoelastic Coating Method, PI, 17/01/01~17/12/31, Ministry of Science and Technology, R.O.C. (MOST-Nuclear Technology Cooperative Research Grant)

10. 新型多向驅動壓電流體元件研製與固液耦合振動分析於實驗量測及理論與數值分析研究，主持人，計畫期間：15/08/01~18/07/31，委任單位：科技部(優秀年輕學者3年期計畫)。

Novel Piezoelectric Fluid Devices Using Push-Pull Antiphase Driving and the Solid-Liquid Coupled Vibration Characteristics Determined by Experimental, Theoretical and Numerical Analyses, PI, 15/08/01~18/12/31, Ministry of Science and Technology, R.O.C. (MOST 3-yrs Grant for Excellent Young Scholar)

11. 三層壓電雙晶片以電極切割形式設計能量擷取系統應用於彎曲與延展模態開發最佳效率元件，主持人，計畫期間：15/08/01~16/07/31，委任單位：科技部。

Enhancement of Electromechanical Coupling Efficiency for Piezoelectric Energy Harvester Using Electrode Connections on Flexural/Extensional Vibrations, PI, 15/08/01~16/12/31, Ministry of Science and Technology, R.O.C. (MOST General Research Grant for Junior Researcher)

12. 磁電彈材料三維振動特性與應用電極設計於能量擷取系統之研究，主持人，計畫期間：14/08/01~15/07/31，委任單位：科技部(一般型計畫)。

Three-Dimensional Vibration Characteristics of Magneto-Electro-Elastic Materials on Energy Harvesting System Using Electrode Designs and Connections, PI, 14/08/01~15/07/31, Ministry of Science and Technology, R.O.C. (MOST General Research Grant)

13. 壓電雙層圓盤之電極連接設計於動態與溫度特性及能量擷取系統之研究，主持人，計畫期間：12/08/01~14/07/31，委任單位：科技部(新進人員2年期計畫)。

Dynamic Characteristics and Temperature Properties of Two-Layered Piezoceramics Disks and Applied to Energy Harvesting System by Using Electrode Connection Designs, PI, 12/08/01~14/12/31, Ministry of Science and Technology, R.O.C. (MOST 2-yrs General Research Grant for Junior Researcher)

14. 壓電能量擷取系統之單層與多層壓電材料以電極設計與電極連接模式於實驗量測、數值計算與理論解析，主持人，計畫期間：11/08/01~12/07/31，委任單位：科技部(新進人員計畫)。

Experimental Measurements, Numerical Calculations, and Theoretical Analysis for Single- and Multi-Layered Piezoceramics on Energy Harvesting System, PI, 11/08/01~12/12/31, Ministry of Science and Technology, R.O.C. (MOST General Research Grant for Junior Researcher)

15. 異質金屬介面對核電廠反應器冷卻水壓力邊界銲接組件之非破壞檢測分析的影響評估，主持人，計畫期間：19/6/12~19/12/12，委任單位：原能會核研所。

Nondestructive Testing and Evaluation on Dissimilar Metal Weld of Reactor Coolant Pressure Boundary Materials, PI, 19/06/12~19/12/12, Institute of Nuclear Energy Research, Atomic Energy Council, R.O.C.

16. 揚聲器單體運用緩衝圈設計之振動分析，主持人，計畫期間：23/01/01~23/12/31，委任單位：西伯股份有限公司。

Vibration suppression and Vibroacoustics Analysis of Loudspeaker using Rubber Frame, PI, 23/01/01~23/12/31, Sable Corporation.

17. 壓電陶瓷暨醫用霧化致動器之振動特性與溫度效應分析(I)，主持人兼任顧問，計畫期間：17/04/01~17/12/31，委任單位：微邦科技股份有限公司。

Vibration Analysis and Thermal Effect on Piezoceramic Medical Nebulizer (I), PI and Consultant, 17/04/01~17/12/31, Technology Company (in confidential)

18. 壓電致動器之振動特性量測與模擬分析，主持人兼任顧問，計畫期間：16/02/01~16/07/31，委任單位：微邦科技股份有限公司。

Vibration Measurements and Simulation on Piezoelectric Actuators, PI and Consultant, 16/02/01~16/07/31, Technology Company (in confidential)

19. 加熱爐內矽鋼胚破壞機制之探討，主持人，計畫期間：13/01/01~13/10/31，委任單位：中國鋼鐵股份有限公司。

Fracture Mechanism of Electromagnetic Steel in Re-Heating Furnace, PI, 13/01/01~13/10/31, China Steel Corporation.

20. 風速計製作暨風洞內校正作業程序，主持人，計畫期間：24/01/01~24/12/31，委任單位：量測科技股份有限公司。

Production on Anemometer and Wind-Tunnel Calibration Procedures, PI, 13/01/01~13/10/31, Measurement Technology Co. Ltd.

21. Finite Element Analysis (FEA) Simulation Capability Enhancement, Co-PI, 23/01/01~23/12/31, Google LLC, Mountainview, CA, US.

22. 衛星通訊酬載結構熱源影響及機械特性研析，共同主持人，計畫期間：21/08/01~21/12/4，委任單位：財團法人金屬工業研究發展中心。

Research on Heat Source Influence and Mechanical Properties of Satellite Communication Payload Structure, Co-PI, 21/08/01~21/12/4, Metal Industries Research & Development Centre.

23. 伺服電機整合油壓系統支感測技術開發，共同主持人，計畫期間：21/01/01~21/12/31，委任單位：財團法人金屬工業研究發展中心。

Integration Sensing Technology for the Measurement of Servo-Motor and Hydric System, Co-PI, 21/01/01~21/12/31, Metal Industries Research & Development Centre.

24. 精密感測技術於先進製程工件的即時量測系統，共同主持人，計畫期間：20/01/01~20/12/31，委任單位：財團法人金屬工業研究發展中心。

Development of Real-time Measurement System of Precision Sensing Technology for Advanced Manufacturing, Co-PI, 20/01/01~20/12/31, Metal Industries Research & Development Centre.

25. 電源供應器及其電子零件安置之結構動態分析，共同主持人，計畫期間：21/01/01~23/12/31，委任單位：康舒科技股份有限公司。

Dynamic Analysis of Electronic Components for Power Supplies, Co-PI, 21/01/01~23/12/31, AcBel Polytech Inc.

26. 結構衝擊與振動分析，共同主持人，計畫期間：19/10/01~20/09/30，委任單位：康舒科技股份有限公司。

Structural Shock and Vibration Analysis for Power Supplies, Co-PI, 19/10/01~20/09/30, AcBel Polytech Inc.

27. 次世代鋼及其綠色製程與產品創新應用產學合作計畫-分項計畫(PS07)極薄電磁鋼片軋延與退火技術，分項計畫共同主持人，計畫期間：13/08/01~17/10/31，委任單位：科技部(前瞻技術產學合作四年期計畫)。

Next-Generation Steel and Green Manufacturing Process and Product Innovation and Application Academia-Industry Collaboration Project. Item PS07: Haeting and Cooling Techniques of Rolling Ultra-thin Electromagnetic Steel, Co-PI, 13/08/01~17/10/31, Ministry of Science and Technology, R.O.C. & China Steel Corporation (4-yrs University-Industry Collaboration Projects in Large Alliance)

28. 光固化式彩色3D積層製造系統研發(1/3)，分項計畫共同主持人，計畫期間：14/05/01~15/04/30，委任單位：科技部(積層製造跨領域專案計畫)。

Research and development of a photo-curable Color 3D Additive Manufacturing System, Co-PI, 14/05/01~15/04/30, Ministry of Science and Technology, R.O.C. (MOST Additive Manufacturing Multidisciplinary Research Project)

29. Development of a Self-Powered Internet of Things Device Using a Hull Type Piezoelectric Energy Harvester, Co-PI (PI: Dr. Shin Yee Khoo, Senior Lecturer, University of Malaysia), Duration: 22/05/19~23/05/18, SATU Joint Research Scheme.

30. Enhancement of Energy Harvesting Performance By Omni-Directional Wind Funnel Coupled with Optimal Bluff Splitter Body Design, Co-PI (PI: Dr. Zhi Chao Ong, Senior Lecturer, University of Malaysia), Duration: 20/05/22~21/05/21, SATU Joint Research Scheme.

31. 前瞻壓電致動於衝擊噴流用冷卻應用(1/2) ，共同主持人，計畫期間：24/01/01~24/12/31，委任單位：國科會(臺捷 (NSTC-CAS) 雙邊合作人員交流PPP研究計畫)。

Impinging jets by advanced piezo-actuation for cooling applications, Co-PI (PI: Prof. An-Bang Wang, Applied Mechanics Institute, National Taiwan University), Duration: 24/01/01~24/012/31, Czech-Taiwanese Joint Research Project on scientific cooperation between the Academy of Sciences of the Czech Republic and the National Science and Technology Council in Taiwan.

32. 非均質功能性材料的理論分析及實驗量測，共同主持人，計畫期間：19/01/01~21/07/31，委任單位：科技部(自由型擴充加值國際合作研究計畫)。

The Investigation of the Inhomogeneous Functional Graded Material from Theoretical Analysis and Experimental Measurement, Co-PI, 19/01/01~21/07/31, Ministry of Science and Technology, R.O.C. jointed by Ukraine. (Proactive MOST 3-yrs Add-on Grant for International Cooperation)

33. 理論解析，數值計算以及實驗量測探討薄壁結構承受撞擊的動態和挫曲特性，共同主持人，計畫期間：16/01/01~18/12/31，委任單位：科技部(台俄雙邊國際合作研究三年期計畫)。

Analytical, Numerical and Experimental Study of Dynamics and Buckling of Thin-Walled Solids under Longitudinal Impact, Co-PI, 16/01/01~18/12/31, Ministry of Science and Technology, R.O.C. jointed by Russia. (Bilateral MOST 3-yrs Add-on Grant for International Cooperation)

34. 功能梯度材料的動態,強韌性及穩定性問題的研究，共同主持人，計畫期間：12/08/01~15/07/31，委任單位：科技部(台俄雙邊國際合作研究三年期計畫)。

Dynamics, Stability and Robustness of Functionally Graded Materials, Co-PI, 12/08/01~15/07/31, Ministry of Science and Technology, R.O.C. jointed by Russia. (Bilateral MOST 3-yrs Add-on Grant for International Cooperation)

35. 覆層銲接處理對核電廠冷卻水壓力邊界異質銲接管之影響研究，共同主持人，計畫期間：18/06/01~18/12/12，委任單位：原能會核研所。

The Characteristics Analysis for Weld Overlay on the Dissimilar Metal Weld of Reactor Coolant Pressure Boundary Materials, Co-PI, 18/06/01~18/12/12, Institute of Nuclear Energy Research, Atomic Energy Council, R.O.C.

36. 核電廠反應器冷卻水壓力邊界異質銲接件之覆銲特性研究，共同主持人，計畫期間：17/05/01~17/12/12，委任單位：原能會核研所。

    1. The Characteristics Analysis for Weld Overlay on the Dissimilar Metal Weld of Reactor Coolant Pressure Boundary Materials, Co-PI, 17/05/01~17/12/12, Institute of Nuclear Energy Research, Atomic Energy Council, R.O.C.

37. 暫態力量量測應用虛實整合技術於智慧製造系統，子計畫主持人，計畫期間：21/01/01~23/12/31，委任單位：教育部(高教深耕臺大核心群拔尖計畫，三年期)

Dynamic force measurement used by virtual-physical integration applying on intelligent manufacturing system, Co-PI, 21/01/01~23/12/31, Ministry of Education & National Taiwan University (Higher Education Sprout Project – 3-yrs Research Grant for NTU Core Consortiums)

38. 開發以壓電材料為基礎的感測及致動系統和電子斑點干涉術的光學全域精密量測的技術，子計畫主持人，計畫期間：18/06/01~20/12/31，委任單位：教育部(高教深耕臺大核心群拔尖計畫，三年期)

 Advanced Sensing and Measurement Technology Development and Application in Smart Machine Systems, Item 3: Development on the optically full-field precision measurement of electronic speckle pattern interferometry based on piezoelectric actuators and sensors, Co-PI, 18/06/01~20/12/31, Ministry of Education & National Taiwan University (Higher Education Sprout Project – 3-yrs Research Grant for NTU Core Consortiums)

39. 汽車引擎關鍵材料強度與疲勞性質參數之研究，主持人，計畫期間：17/06/01~17/11/30，委任單位：教育部。

40. 高張力鋼板之Yoshida-Uemori材料模型研究，主持人，計畫期間：16/07/01~16/11/30，委任單位：教育部。

41. 大樓磁磚穩固性創新檢測技術開發，子計畫主持人，計畫期間：16/01/01~16/12/31，委任單位：教育部。

42. 微型鑽針之整合性研究：產品設計、鑽削製程與量測系統，共同主持人，計畫期間：12/01/01~16/12/31，委任單位：教育部(發展學校重點特色補助計畫)。