Embedded Files
Experimental Mechanics Lab. (EB-107-2)
@ Department of Mechanical Engineering
National Taiwan University
Dr. Yu-Hsi Huang (黃育熙 博士)
Professor, Department of Mechanical Engineering, National Taiwan University (NTU)
Director, NTU Museum of Engineering
Director, Industrial Research Institute, College of Engineering, NTU
Joint Professor, Graduate School of Advanced Technology, NTU
No.1, Sec.4, Roosevelt Rd., Taipei, Taiwan, 10617.
(+886)2-33662690
Professor, Department of Mechanical Engineering, National Taiwan University, Aug 2021-Present
Joint Appointment Professor, Graduate School of Advanced Technology (Program in Nanoengineering and Nanoscience), National Taiwan University, Jan 2022-Present
Deputy Director, Tjing Ling Industrial Research Institute, National Taiwan University, Aug 2022-July 2023
Associate Professor, Department of Mechanical Engineering, National Taiwan University, Aug 2018-Jul 2021
Associate Professor, Department of Mechanical Engineering, National Taiwan University of Science and Technology, Aug 2016-Jul 2018
Assistant Professor, Department of Mechanical Engineering, National Taiwan University of Science and Technology, Aug 2012-Jul 2016
Assistant Professor, Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Aug 2011-July 2012
Assistant Professor, Graduate Institute of Engineering, National Taiwan University of Science and Technology, Feb 2011-July 2011
Postdoctoral Fellow, Dept. of Mechanical Engineering, National Taiwan University, 2010-2011
Visiting Scholar, Dept. of Mechanical Engineering, Chongwan University, Aug 2024
Visiting Scholar, Dept. of Mechanical Engineering, University of Malaya, Feb 2015, Jun-Jul 2017, Jan 2018, Jan 2024
Visiting Scholar, Dept. of Mechanical Engineering, University of Michigan, 2009
Dr. Y.H. Huang leads to Experimental Mechanics Laboratory (EML@EB107-2) in National Taiwan University (NTU) from August 2018 to present. His group is original in National Taiwan University of Science and Technology from 2011 to July 2018. Research fields are Piezoelectric Material and Piezoelectricity, Vibration, Solid Mechanics, and Experimental Mechanics. Recently, the sensors and actuators, piezoelectric energy harvester, fluid-structure interaction on piezoelectric structure, photoelasticity, and mechanical property of materials are mainly studied in detail.
Experimental techniques, finite element numerical calculation and theoretical analysis are used to investigation in our laboratory. Techniques in mechanics are built on vibration analysis, strain and contact measurements, and residual stress. We have the following experimental techniques:
Electronics Speckle Pattern Interfereometry (ESPI) and scanning laser Dopper Vibrometer (LDV, OFV-505) are the basic equipment of experimentally dynamic characteristics in EML.
Impedance analyzer and piezoelectric d33 meter determinate on piezoelectric properties.
Linear and circular polariscopes established on stress measurements by photoelasticity.
Wind Tunnel with hot wire anemometer and pitot are used to study on Fluid-structure interaction.
Artificial ear (GRAS 43AG-9) and Bone transducer (B81) develop the acoustical device.
Strain Gage, piezoelectric film (PVDF sensors) and 8-ports dynamic indicator use to static and dynamic strain measurements.
Digital image correlation (DIC) helps for the solution in industry.
Theomography (FLIR A310) and Heat chamber study on the heat transfer and thermal stress.
The results in experimental measurements are emphasized on verification with theoretical and numerical analyses. Interaction and multiscale mechanics are studied on the research fields of solid mechanics, vibration, acoustics, heat transfer and thermal stress.
The research group is mainly cooperative with
1. Inherited from the Fracture Lab of Prof. C.C. Ma's techniques in ME@NTU: Dynamic Characteristics in Structure, Digital Image Correlation, and Fiber Bragg's Grating Sensors.
2. Prof. C.K. Chao's Solid Mechanics Lab in ME@NTUST: Shock, Fracture and Vibration Suppression of Electronic Components, Fracture by Thermal Stress and Elastic-Plastic Deformation in Rolling.
3. Prof. Ong's Advanced Shock & Vibration Research Group (ASVR) in ME@Univ. Malaya, Malaysia: Vibration, Optimization in Engineering, and Energy Harvesting System.
4. Prof. Jaesun Lee's NDT/SHM Laboratory in ME@Changwon National University, Korea: NDE for the Additive Manufacturing Material and Structure.
5. Prof. Yasutomo Uetsuji (上辻 靖智) 's Functional Materials Engineering Laboratory (機能材料工学研究室) in ME@Osaka Institute of Technology, Japan: Determination on Material Properties for the Functional Material.
6. Prof. Chuanchieh Liao's Computational Thermo-Fluids Laboratory in ME@CYCU: Fluid-Structure Interaction.
7. Prof. An-Bang Wang, Prof. Yi-Ju Chou @ Applied Mechanics Institute, NTU, and doc. Ing. Zdeněk Trávníček, CSc. @ Academy of Sciences of the Czech Republic: Impinging Jets by Advanced Piezo-actuation for Cooling Applications.
8. Prof. Yi-Chuang Wu in ME@NTUST and Prof. Chan-Yi Liao in ME@NCU: Dynamic Property of Structure.
Lastly updated: Aug 19, 2025
The following is the playable PDF of the research introduction.
20250506_BS Intro_YHH.pdfGoogle Sites
Report abuse