PUBLICATIONS
37. Solomon Ansah, Namsoo Shin, Jong-Sook Lee, Hoon-Hwe Cho (Corresponding author); A Comprehensive Parametric Study for Solid-state Lithium-ion Battery Through Finite Element Simulation, Electronic Materials Letters, 2021
36. Solomon Ansah, Hyejeong Hyun, Namsoo Shin, Jong-Sook Lee, Jongwoo Lim, Hoon-Hwe Cho (Corresponding author); Data on the effect of particle size, porosity and discharging rate on the performance of lithium-ion battery with NMC 622 cathode through numerical analysis, Data in Brief, Vol. 37, p. 107246, 2021
35. Solomon Ansah, Hyejeong Hyun, Namsoo Shin, Jong-Sook Lee, Jongwoo Lim, Hoon-Hwe Cho (Corresponding author); A Modeling Approach to Study the Performance of Ni-rich Layered Oxide Cathode for Lithium-ion Battery, Computational Materials Science, Vol. 196, p.110559, 2021
34. Sam Yaw Anaman, Solomon Ansah, Hoon-Hwe Cho (Corresponding author), Min-Gu Jo, Jin-Yoo Suh, Minjung Kang, Jong-Sook Lee, Sung-Tae Hong, Heung Nam Han; An Investigation of the Microstructural Effects on the Mechanical and Electrochemical Properties of a Friction Stir Processed Equiatomic CrMnFeCoNi High Entropy Alloy, Journal of Materials Science & Technology, Vol. 87, pp. 60-73, 2021
33. Ajit Kumar Pramanick, Hrishikesh Das, Ji-Woo Lee, Yeyoung Jung, Hoon-Hwe Cho, Sung-Tae Hong, Mahadev Shome, Akshay Kumar Pramanick; Texture analysis and joint performance of laser-welded similar and dissimilar dual-phase and complex-phase ultra- high-strength steels, Materials Characterization, Vol. 174, p. 111035, 2021
32. Hrishikesh Das, Mounarik Mondal, Sung-Tae Hong, Ji-Woo Lee, Hoon-Hwe Cho; Texture and precipitation behavior of friction stir welded Inconel 825 alloy, Materials Today Communications, Vol. 25, p. 101295, 2020
31. Sam Yaw Anaman, Solomon Ansah, Yong-Fang Li, Hoon-Hwe Cho (Corresponding author), Jong-Sook Lee, Heung Nam Han, Sung-Tae Hong; Experimental and numerical studies on the electrochemical properties of an electrically assisted pressure joint of austenitic stainless steel and Ni-based superalloy, Materials Characterization, Vol 165, p. 110404, 2020
30. Hyeji Park, Kyungbae Kim, Kyeongjae Jeong, Jin Soo Kang, Hoon-Hwe Cho, Balamurugan Thirumalraj, Yung-Eun Sung, Heung Nam Han, Jae-Hun Kim, David C. Dunand, Heeman Choe; Integrated Porous Cobalt Oxide/Cobalt Anode with Micro/Nano-Hybrid Pores for Lithium Ion Battery, Applied Surface Sciences, Vol 525, p. 146592, 2020
29. Jiwoo Lee, Hoon-Hwe Cho (Corresponding author), Mounarik Mondal, Hrishikesh Das, Sung-Tae Hong; Microstructural and Mechanical Analysis of a Friction Stir Welded Joint of Dissimilar Advanced High-Strength Steels, Transactions of Materials Processing, Vol 29 (1), pp. 11-19, 2020
28. Sam Yaw Anaman, Hoon-Hwe Cho (Corresponding author), Hrishikesh Das, Sung-Il Baik, Sung-Tae Hong, Jong-Sook Lee, Galvanic Corrosion Assessment of Friction Stir Butt Welded Joint of Aluminum and Steel Alloys, International Journal of Precision Engineering and Manufacturing-Green Technology, 2019
27. Kyeongjae Jeong, Hoon-Hwe Cho (Co-first author), Heung Nam Han, David C. Dunand; A Fully Coupled Diffusional-Mechanical Finite Element Modeling for Tin Oxide-Coated Copper Anode System in Lithium-Ion Batteries, Computational Materials Science, Vol. 172, pp. 109343, 2020
26. Sam Yaw Anaman, Hoon-Hwe Cho (Corresponding author), Hrishikesh Das, Jong-Sook Lee, Sung-Tae Hong; Microstructure and mechanical/electrochemical properties of friction stir butt welded joint of dissimilar aluminum and steel alloys, Materials Characterization, 2019
25. Hoon-Hwe Cho (Corresponding author, First author), Dinc Erdeniz, Keith W Sharp, David C Dunand; Experimental and modeling study of compressive creep in 3D-woven Ni-based superalloys, Acta Materialia, Vol 155, pp. 236-244, 2018
24. Hyeji Park, Hoon-Hwe Cho, Kyungbae Kim, Kicheol Hong, Jae-Hun Kim, Heeman Choe, David C Dunand; Surface-oxidized, freeze-cast cobalt foams: microstructure, mechanical properties and electrochemical performance, Acta Materialia, Vol 142, pp. 213-225, 2018
23. Hoon-Hwe Cho (Corresponding author), Matthew PB Glazer, and David C Dunand; Modeling of Stresses and Strains during (De)Lithiation of Ni3Sn2-Coated Nickel Inverse-Opal Anodes, ACS Applied Materials & Interfaces, Vol. 9, pp.15433-15438, 2017
22. Dong-Wan Kim, Hoon-Hwe Cho, Siwok Park, Sung-Hwan Kim, Moon-Jo Kim, Kyoo-Young Lee, Heung Nam Han; A model for phase transformation of microalloyed low carbon steel combined with Nb precipitation kinetics, Transactions of Materials Processing, Vol. 26, No. 1, pp. 48-54, 2017
21. Dong-Wan Kim, Hoon-Hwe Cho, Won-Beom Lee, Kyun Taek Cho, Yi-Gil Cho, Se-Jong Kim, and Heung Nam Han; A finite element simulation for carburizing heat treatment of automotive gear ring incorporating transformation plasticity, Materials and Design, Vol. 99, pp. 243-253, 2016
20. Hoon-Hwe Cho, Yu-chen Karen Chen-Wiegart, and David C. Dunand; Finite element analysis of mechanical stability of coarsened nanoporous gold, Scripta Materialia, Vol. 115, pp. 96-99, 2016
19. Hoon-Hwe Cho, Matthew P. B. Glazer, Qian Xu, Heung Nam Han, and David C. Dunand; Numerical and experimental investigation of (de)lithiation-induced strains in bicontinuous silicon-coated nickel inverse opal anodes, Acta Materialia, Vol. 107, pp. 289-297, 2016
18. Hoon-Hwe Cho , Dong-Wan Kim, Sung-Tae Hong, Yong-Ha Jung, Keunho Lee, Yi-Gil Cho, Suk Hoon Kang, and Heung Nam Han; Three-dimensional numerical model considering phase transformation in friction stir welding of steel, Metallurgical and Materials Transactions A, Vol. 46A, pp. 6040-6051, 2015
17. Se-Jong Kim, Daeyong Kim, Keunho Lee, Hoon-Hwe Cho, and Heung Nam Han; Residual-stress-induced grain growth of twinned grains and its effect on formability of magnesium alloy sheet at room temperature, Materials Characterization, Vol. 109, pp. 88-94, 2015
16. Hoon-Hwe Cho, Yigil Cho, and Heung Nam Han; Finite element analysis for mechanical response of Ti foams with regular structure obtained by selective laser melting, Acta Materialia, Vol. 97, pp. 199-206, 2015
15. Hoon-Hwe Cho, Yi-Gil Cho, Dong-Wan Kim, Se-Jong Kim, Won-Beom Lee, and Heung Nam Han; Finite element investigation for edge wave prediction in hot rolled steel during run out table cooling, ISIJ International, Vol. 54, No.7, pp. 1646-1652, 2014
14. Hyung-Seok Jang, Jung-Ho Lee, Yong-Sun Park, Young-O Kim, Jimin Park, Tae-Youl Yang, Kyoungsuk Jin, Jaehun Lee, Sunghak Park, Jae Myoung You, Ki-Woong Jeong, Areum Shin, In-Seon Oh, Min-Kyung Kwon, Yong-Il Kim, Hoon-Hwe Cho, Heung Nam Han, Yangmee Kim, Yoon Ho Chang, Seung R. Paik, Ki Tae Nam, Yoon-Sik Lee; Tyrosine-mediated two-dimensional peptide assembly and its role as a bio-inspired catalytic scaffold, Nature Communications, Vol. 5, No. 3665, doi:10.1038/ncomms4665, 2014
13. Md. Abu Mowazzem Hossain, Md. Tariqul Hasan, Sung-Tae Hong, Michael Miles, Hoon-Hwe Cho and Heung Nam Han; Mechanical behaviors of friction stir spot welded joints of dissimilar ferrous alloys under opening-dominant combined loads, Advances in Materials Science and Engineering, Vol. 2014, 572970, 2014
12. Md. Abu Mowazzem Hossain, Md. Tariqul Hasan, Sung-Tae Hong, Michael Miles, Hoon-Hwe Cho and Heung Nam Han; Failure behaviours of friction stir spot welded joints of dissimilar ferrous alloys under quasi-static shear loads, International Journal of Materials and Product Technology, Vol. 48, Nos. 1/2/3/4, pp. 179-193, 2014
11. Md. Abu Mowazzem Hossain, Md. Tariqul Hasan, Sung-Tae Hong, Michael Miles, Hoon-Hwe Cho, and Heung Nam Han; Friction stir spot welded joints of 409L stainless steels fabricated by a convex shoulder tool, Metals and Materials International, Vol. 19, No. 6, pp. 1243-1250, 2013
10. Jun-Yun Kang, Sang Hoon Lee, Yi-Gil Cho, Seul Cham Kim, Hoon-Hwe Cho, Heung Nam Han, Kyu Hwan Oh; Formation of Ultrafine Cellular Microstructure Around Alumina Particles in a Low-Carbon Steel, Metallurgical and Materials Transactions A, Vol. 44, Issue 9, pp. 4098-4105, 2013
9. Yi-Gil Cho, Tae-Hong Ahn, Hoon-Hwe Cho, Joong-Ho Shin, Jun Hyuk Moon, Shu Yang, In-Suk Choi, Heung Nam Han, and Ju Li; Study of architectural responses of 3D periodic cellular materials, Modelling and Simulation in Materials Science and Engineering, Vol. 21, 065018, 2013
8. Moon-Jo Kim, Hoon-Hwe Cho, Sung-Hwan Kim, Seung Man Nam, Seung-Ha Lee, Man-Been Moon and Heung Nam Han; Effect of Zr addition on phase transformation and precipitation in B-added hot stamping steel, Metals and Materials International, Vol. 19, No. 4, pp. 629-635, 2013
7. Hoon-Hwe Cho, Sung-Tae Hong, Jae-Hun Roh, Hyun-Sik Choi, Suk Hoon Kang, Russell J. Steel, and Heung Nam Han; Three-dimensional numerical and experimental investigation on friction stir welding processes of ferritic stainless steel, Acta Materialia, Vol. 61, pp. 2649-2661, 2013
6. Chi-Sung Jeon, Sung-Tae Hong, Yong-Jai Kwon, Hoon-Hwe Cho, Heung Nam Han; Material properties of friction stir spot welded joints of dissimilar aluminum alloys, Transactions of Nonferrous Metals Society of China, Vol. 22, pp. s605-s613, 2012
5. Yi-Gil Cho, Jin-You Kim, Hoon-Hwe Cho, Pil-Ryung Cha, Dong-Woo Suh, Jae Kon Lee, and Heung Nam Han; Analysis of Transformation Plasticity in Steel Using a Finite Element Method Coupled with a Phase Field Model, PLoS ONE, Vol. 7, e35987, 2012
4. Hoon-Hwe Cho, Suk Hoon Kang, Sung-Hwan Kim, Kyu Hwan Oh, Heung Ju Kim, Woong-Seong Chang, and Heung Nam Han; Microstructural Evolution in Friction Stir Welding of High-Strength Linepipe Steel, Materials & Design, Vol. 34, pp. 258-267, 2012
3. Dong-Wan Kim, Yi-Gil Cho, Hoon-Hwe Cho, Sung-Hwan Kim, Won-Beom Lee, Myoung-Gyu Lee, and Heung Nam Han; A Numerical Model for Vacuum Carburization of an Automotive Gear Ring, Metals and Materials International, Vol. 17, No. 6, pp. 885-890, 2011
2. Hoon-Hwe Cho, Heung Nam Han, Sung-Tae Hong, Jong-Hwan Park, Yong-Jai Kwon, Seok-Hyun Kim, and Russell J. Steel; Microstructural Analysis of Friction Stir Welded Ferritic Stainless Steel, Materials Science and Engineering A, Vol. 528, pp. 2889-2894, 2011 - Science Direct TOP25 Hottest Articles for January to March 2011
1. Hoon-Hwe Cho, Yi-Gil Cho, Young-Roc Im, Jae Kon Lee, Jai-Hyun Kwak, and Heung Nam Han; A Finite Element Analysis for Asymmetric Contraction after Coiling of Hot-rolled Steel, Journal of Materials Processing Technology, Vol. 210, pp. 907-913, 2010