Instructions to install a salt chlorinator and pH regulator (zodiac chlorinator)
Why install a salt chlorinator?
To keep the pool in wonderful condition, it is vital to have persistent control and cleaning of the water. Saline electrolysis is the ideal alternative to sanitize your pool water.
Therefore, a progression of gear and machinery is needed to participate in the filtration and control cycle of the pool water and subsequently have the option to appreciate it with total solace and safety.
In the event that you have settled on saline chlorination to sanitize your pool water as an alternative to chlorine tablets, underneath we explain the technique to install a saline electrolysis system effectively as well as the dosing pump to offer total control of pH and chlorination. what your pool needs.
Prior to starting the installation ...
The parts you ought to have when installing a salt electrolysis system are:
Salt chlorinator control focus
Cathode or cell for salt chlorination
Regarding the pH control system, it is required:
Central and peristaltic pump
Anode or test to identify the pH levels of the water
Answers for calibrate the base and maximum working of the test
PH diminishing or increasing tank
PVC tube for the aspiration/dosing of the pH reducer or sponsor
Salt electrolysis installation (Pentair Rebel Pool Cleaner)
Underneath you will discover the means to follow to install the salt chlorination system and the peristaltic pump for pH control in a basic and safe way. In addition, you can manage yourself with this practical CTX explanatory video to make an installation of the salt chlorinator and the dosing pump with all the settings and details to take into account.
1. Drill two openings in the water return tube after the filtration system that is available (either a sand or cartridge channel). These two openings ought to be 15-20 cm apart to work consummately.
Opening to embed the pH corrector
2. Place the pH regulator on the wall (it tends to be a solitary gadget that contains the central and the peristaltic pump to analyze the pH levels and infuse the amount of regulator that the water in your pool needs).
3. Place the pH reducer or promoter near the pH regulator and addition the PVC tube that will suck the necessary fluid at all occasions. You should penetrate the cap of the diminishing or increasing tank , embed the cylinder and interface it to the dosing pump to get their orders.
4. Associate the power source cylinder to the pH regulator so the amount of reducer or promoter passes through the pump to the water bring tube back. Therefore, you should associate the flip side of the cylinder into the opening created to embed the pH corrector in sync 1.
5. Associate the peristaltic pump to ability to calibrate the pH anode or test.
6. Prepare the test to the peristaltic pump already running:
Place it in the pH7 standard answer for a couple of moments and press the calibration button.
Repeat the same action with the pH9 standard arrangement
7. Place the test or terminal in the opening made for it in sync 1 without overtightening. https://seo1.gr/
8. Then, place the salt chlorination cathode in the water return tube with the goal that the salt electrolysis system can take impact.
9. Place on the wall and interface the central of the saline chlorinator with the terminal to make it work appropriately. You will also have to connect the control unit to start working.
Cunning!
Start-up of the salt electrolysis system
Whenever you have installed and associated both the saline chlorination system and the dosing pump, you should take into account the accompanying indications to start up the whole saline electrolysis system in a powerful and right way
1. Check the state of the sand channel or cartridge so its capacity is viable
2. Add unadulterated sea salt to the water. You will require somewhere in the range of 3 and 4 kg for each m3 of water. The salt should be explicit for salt chlorination, that is, without additives that damage the whole sanitization system.
3. Recirculate the water until the salt has totally disintegrated with the saline electrolysis system not associated.
4. Check and balance the water levels for maximum control:
- The pH should be somewhere in the range of 7.2 and 7.6
- The alkalinity should have a range somewhere in the range of 80 and 120 ppm
5. You can now associate the saline electrolysis system with 100% of the creation
6. Adjust the electrolysis system with the force needed by your pool contingent upon the necessities it has.(Salt water chlorinator)