Don't Forget to Bookmark our site.
As with all areas of woodworking, issues will arise. Some are intrinsic to the materials, others to the tools and equipment available. Know how to deal with the issue will help your state of mind, and the quality of your finished piece. Bubbles in veneer
Why are bubbles appearing in veneer applied with PVA glue in a bag press.
Basic Veneer Equipment for a Small Shop
Advice on setting up shop, for a woodworker considering breaking into veneered furniture.
Gluing Veneer To Radius Box Parts, "Made Easy"
Gluing veneer to hardwood can actually be a good thing. As long as the hardwood has the proper moisture content, which is between 6 to 8 percent. Also, the smaller the piece of hardwood the better. Wood only expands and contracts, the width of your board. Also I like to veneer both sides, to balance the hardwood.
A while back, I published a tutorial on making a compass rose which was later published by Highland Woodworking in their newsletter. That compass rose was easy to do but required a special 22.5 degree template, which many people probably didn't have. After thinking about the problem, I came up with a slightly different compass rose which can be done with a standard 45 degree triangle.
Veneer is a thin sheet of ornamental wood, or occasionally other material used as a surface to give a handsome exterior finish to cabinet articles or other work, which are made with a basis of cheaper and it may be of stronger materials.
Veneer applied over MDF is splitting and cracking - what could be the cause.