1. Thesis
석사학위: 순환유동층에서 loop-seal 을 갖는 고체재순환부의 특성 (1997)
(Solids Recycle Characteristics of Loop-seal in a Circulating Fluidized Bed)
박사학위: 가압순환유동층에서의 고체재순환 및 열전달 특성 (2002)
(Solids Recycle and Heat Transfer Characteristics in a Pressurized Circulating Fluidized Bed System)
2. Journal papers
1. Namkung, W., Kim, S.W. and Kim, S.D., "Hydrodynamic and Flow Regime in a Fast Fluidized Bed," Chem. Eng. J., 72, 245-252 (1999)
2. Kim, S.W., Namkung, W. and Kim, S.D., "Solids Flow Characteristics in Loop-Seal of a Circulating Fluidized Bed," Korean J. Chem. Eng., 16(1), 82-88 (1999)
3. Kim, S.W., Namkung, W. and Kim, S.D., "Solids Behavior in a Freeboard of FCC Regenerator," J. Chem. Eng. Japan, 33(1), 78-85 (2000)
4. Namkung, W., Kim, S.W. and Kim, S.D., "Transition Velocity to Turbulent Fluidized Bed and Flow Regime," Hwahak Konghak, 38(4), 523-528 (2000)
5. Kim, S.W., Namkung, W. and Kim, S.D., "Solids Recycle Characteristics of Loop-Seals in a Circulating Fluidized Bed," Chem. Eng. Technol., 24(8), 843-849 (2001).
6. Kim, S.W., Ahn, J.Y., Lee, D.H. and Kim, S.D., "Continuous Measurement of Solid Flow in a Circulating Fluidized Bed," Korean J. Chem. Eng. 18(4), 556-560 (2001).
7. Kim, S.W. and Kim, S.D., "Effects of Particle Properties on Solids Recycle in Loop-Seal of a Circulating Fluidized Bed," Powder Technol. 124, 76-84 (2002).
8. Kim, S.W., Ahn, J. Y., Kim, S.D. and Lee, D. H., "Heat Transfer and Bubble Characteristics in a Fluidized Bed Heat Exchanger," Int. J. Heat Mass Transfer, 46(3), 399-409 (2003).
9. Namkung, W., Kim, S.W. and Kim, S.D., “Hydrodynamic characteristics of a FCC regenerator,” Korean J. Chem. Eng. 20(1), 110-115 (2003).
10. Kim, S.W., Lee, D.H. and Kim, S.D., “Pressure Balance Model for a Circulating Fluidized Bed with Loop-Seal," Ind. Eng. Chem. Res., 41(20), 4949-4956 (2002).
11. Kim, S.W., Kirbas, G., Bi, H., Lim, C.J. and Grace, J.R., “Flow Behavior and Regime Transition in a High-Density Circulating Fluidized Bed Riser,” Chem. Eng. Sci., 59(18), 3955-3963 (2004).
12. Kim, S.W., Kirbas, G., Bi, H., Lim, C.J. and Grace, J.R., “Flow Structure and Thickness of Annular Downflow Layer in a Circulating Fluidized Bed Riser,” Powder Technol. 142, 48-58 (2004).
13. Kim, S.W. and Kim, S.D., "Effect of Pressure on Solids Flow Characteristics in Recycle System of a Circulating Fluidized Bed," Korean Chem. Eng. Res., 48(2), 198-204 (2010).
14. Kim, S.W., Lee, J.W., Kim, C.J., Koh, J.S., Kim, G.R. and Choi, S., “Characteristics of Deposits Formed in Cyclones in Commercial RFCC Reactor," Ind. Eng. Chem. Res., 51, 10238-10246 (2012).
15. Koo, B.S., Lim, J.H., Kim, S.W. C.J. Kim, E.H. Park, J.S. Lee, S.H. Won, J.W. Bae and Lee, D.H., “Fast Pyrolysis of Biomass in a Bubbling Fluidized Bed Reactor," J. Chem. Eng. Japan, 45(10), 862-867 (2012).
16. Kim, S.W., Lee, J.W., Koh, J.S., Kim, G.R., Choi, S. and Yoo, I.K., “Formation and Characterization of Deposits in Cyclone Dipleg of a Commercial RFCC Reactor," Ind. Eng. Chem. Res., 51(43), 14279-14288 (2012).
17. Kim, S.W., Koo, B.S., Ryu, J.W., Lee, J.S., Kim, C.J., Lee, D.H., Kim, K.R. and Choi, S., “Bio-oil from Pyrolysis of Palm and Jatropha Wastes in Fluidized Bed,”Fuel Process. Technol. 108, 118-124 (2013).
18. Cho, H.T., Cha, B.J., Kim, S.W., Ryu, J.W., Kim, J.H. and Moon, I., “Numerical Analysis for Particle Deposit Formation in Reactor Cyclone of Residue Fluidized Catalytic Cracking," Ind. Eng. Chem. Res., 52, 7252-7258 (2013).
19. Kim, S.W., Park, D.K. and Kim, S.D., “Pyrolytic Characteristics of Jatropha Seed Shell Cake in Thermobalance and Fluidized Bed Reactors,” Korean J. Chem. Eng., 30, 1162-1170 (2013).
20. Kim, S.W. and Kim, S.D., “Heat Transfer Characteristics in a Pressurized Fluidized Bed of Fine Particles with Immersed Horizontal Tube Bundle,” Int. J. Heat Mass Transfer, 64, 269-277 (2013).
21. Kim, S.W., Koo, B.S. and Lee, D.H., “A Comparative Study of Bio-oils from Pyrolysis of Microalgae and Oil Seed Waste in a Fluidized Bed,”Bioresource Technol. 162, 96-102 (2014).
22. Kim, S.W., Koo, B.S. and Lee, D.H., “Catalytic Pyrolysis of Palm Kernel Shell Waste in a Fluidized Bed,”Bioresource Technol. 167, 425-432 (2014).
23. Kim, S.W., “Prediction of Product Distribution in Fine Biomass Pyrolysis in Fluidized Beds based on Proximate Analysis,”Bioresource Technol. 175, 275-283 (2015).
24. Kim, S.W., “Pyrolysis conditions of biomass in fluidized beds for production ofbio-oil compatible with petroleum refinery,”J. Anal. Appl. Pyrolysis 117, 220-227 (2016).
25. Kim, S.W., “Measurement of carbon nanotube agglomerates size and shape in dilute phase of a fluidized bed,” Korean Chem. Eng. Res., 55(5), 646-651 (2017).
26. Kim, S.W. and Kim, S.D., “Void Properties in Dense Bed of Cold-Flow Fluid Catalytic Cracking Regenerator,” Processes, 6(7), 80 (2018).
27. Kim, S.W., “Effect of Particle Size on Carbon Nanotube Aggregates Behavior in Dilute Phase of a Fluidized Bed,” Processes, 6(8), 121 (2018).
28. Kim, S.W., “Application of Particle Imaging Method for Measurement of Solid Volume Fraction in Carbon Nanotube Particles Fluidized Bed,” International Journal of Engineering & Technology (UAE), 7(3.33), 85-89 (2018).
29. Park, S.H. and Kim, S.W., “Visualization of Carbon Nanotube Aggregates in Dilute Phase of a Fluidized Bed,” International Journal of Engineering & Technology (UAE), 7(3.34), 534-538 (2018).
30. Kim, S.W., Yeo, C.E. and Lee, D.Y., "Effect of Fines Content on Fluidity of FCC Catalysts for Stable Operation of Fluid Catalytic Cracking Unit," Energies, 12(2), 293 (2019).
31. Kim, S.W., “Effect of Height on CNT Aggregates Size and Shape in Freeboard Region of a Fluidized Bed,” Korean Chem. Eng. Res., 57(1), 105-110 (2019).
32. Kim, S.W., “Review: Particle Receiver Technology for Concentrating Solar Power System,” NICE, 37(3), 357-362 (2019).
33. Lee, M.J., Kim, S.W., "Imaging Method for Measurements of Particle Density and Solid Holdup of Entangled MWCNTs in a Fluidized Bed," Materials, 12, 2035 (2019).
34. Yeo, C.E., Kim, S.W., "Axial holdup distributions of FCC catalysts in a small-diameter riser with abrupt exit in circulating fluidized bed," Adv. Powder Technol., 31(5), 1946-1956 (2020).
35. Lee, M.J., Kim, S.W., "Preparation of MWCNT Microbeads for the Application of Bed Materials in a Fluidized Bed Heat Exchanger," Materials, 13, 1289 (2020).
36. Park, S.H., Yeo, C.E., Lee, M.J., Kim, S.W., “Effect of Bed Particle Size on Thermal Performance of a Directly-Irradiated Fluidized Bed Gas Heater,” Processes, 8, 967 (2020).
38. Ngo, S., Lim, Y., Lee, D.Y., Seo, M.Y., Kim, S.W., “Experiment and numerical analysis of catalytic CO2 methanation in bubbling fluidized bed reactor,” Energy Conv. Management, 233(1), 113863 (2021).
39. Park, S.H., Kim, S.W., “Characteristics of Heat Absorption by Gas in a Directly-irradiated Fluidized Bed
Particle Receiver,” Korean Chem. Eng. Res., 59(2), 239-246 (2021).
40. Park, S.H., Kim, S., Kim, S.W., “Heat absorption characteristics of gas in a directly irradiated solar fluidized bed receiver with tube shaped immersed transmission window,” Solar Energy, 232, 388-397 (2022).
41. Kim, S., Park, S.H., Kim, S.W., “Heat absorption characteristics of gas in a solar fluidized bed receiver with carbon nanotubes,” Adv. Powder Technol., 33, 103846 (2022).
42. Kim, S., Won, G., Lee, M.J., Kim, S.W., “Analysis of Hydrodynamics in a Directly-Irradiated Fluidized Bed Solar Receiver Using CPFD Simulation, ” Korean Chem. Eng. Res., 60(4), 535-543 (2022).
43. Ingale, G.U., Kwon, H., Jeong, S., Park, D., Kim, W., Bang, B., Lim, Y., Kim, S.W., Kang, Y., Mun, J. Jun, S., Lee, U., “Assessment of Greenhouse Gas Emissions from Hydrogen Production Processes: Turquoise Hydrogen vs. Steam Methane Reforming, “ Energies, 15, 8679 (2022).
44. Lee, M. J., Kim, S., Kim, S. W., Experimental investigation of wall-to-bed heat transfer of carbon nanotubes in a fluidized bed, Int. J. Heat Mass Transfer, 204, 123858 (2023).
45. Kim, S., Park, S.H., Chang, Y.J., Go, Y., Kim, S.W., Carbon nanotube microbeads for enhanced gas heating in a fluidized bed solar air collector, Renewable Energy, 221, 119781 (2024).
46. Ngo, S.I., Bui, H.T.H., Lim, Y., Lee, U., Lee, Y., Kim, S.W., Effect of gas distributors on hydrodynamics in molten-metal bubble column reactors for fluorinated gas removal using computational fluid dynamics, Chemical Engineering Research and Design, 208, 436-445 (2024).
47. Yujin Go, Suyoung Kim, Ye Ji Chang, Geunhye Won, Sung Won Kim, Enhanced thermal efficiency of solar liquid tin receiver with carbon black-reinforced carbon nanotube absorber, Renewable Energy, 228, 120658 (2024).
48. Yujin Go, Suyoung Kim, Ye Ji Chang, Geunhye Won, Sung Won Kim, Carbon nanotube heat absorber for efficient direct-heating of liquid tin in a solar receiver, Solar Energy, 282, 112934 (2024).
49. Suyoung Kim, Min Ji Lee, Ye Ji Chang, Yujin Go, Geunhye Won, Sung Won Kim, A CPFD Simulation on Hydrodynamics of Carbon Nanotube Aggregates in a Fluidized Bed, Korean J. Chem. Eng., In press (2024).
50. Geunhye Won, Suyoung Kim, Ye Ji Chang, Yujin Go, Sung Won Kim, Magnetic carbon nanotube sorbents with macropores formed by salts for oily wastewater treatment, J. Industrial Eng. Chem., 142, 463-475 (2025).
51. Ingale, G.U., Park, D.-H, Yang, C.-W, Kwon, H.-M, Wi, T.-G, Park, Y.-J, Kim, S.d, Kang, Y.-B, Lim, Y.-I, Kim, S.W.,*, Lee, U.-D., Low-carbon hydrogen production by molten metal–catalyzed methane pyrolysis: Catalysts, reactor design, and process development, Renewable and Sustainable Energy Reviews, 208, 114999 (2025).
52. Geunhye Won, Ye Ji Chang, Suyoung Kim, Sung Won Kim, Oily wastewater treatment using a CNT sorbent in a three-phase circulating fluidized bed, Chem. Eng. Sci., 302, Part B, 120869 (2025).
53. Suyoung Kim Haeun Son, Sung Won Kim, Soung Hee Park, Fabrication of carbon nanotube microbeads for solar fluidized bed particle receiver, Korean Chem. Eng. Res., 63(2), 105114 (2025).
54. Son Ich Ngo, Young-Il Lim, Uen-Do Lee, Youngjae Lee, Sung Won Kim, Effects of wettability on bubble characteristics in air-water and molten-metal bubble columns using level-set volume-of-fluid computational fluid dynamics, International Journal of Multiphase Flow, 192, 105369 (2025)
3. Patents (해외 등록)
1. Kim, S. W. et al. (공동발명자 총 11인) , Method for preparing vinyl chloride using ethane and 1,2-dichloroethane, and the apparatus therefor,’ Russia, RU 2394014 (2010)
2. Kim, S. W. et al. (공동발명자 총 10인) , “Method for producing high value aromatics and olefin from light cycle oil produced by a fluidized catalytic cracking process,” Singapore, SG 170497 (2011).
3. Kim, S. W. et al., (제 1발명자:총 7인), “Apparatus for preparing vinyl chloride by pyrolysis of 1,2-dichloroethane and method of preparing vinyl chloride using the same,” China, CN 101198575 (2012).
4. Kim, S. W. et al., (제 1발명자:총 10인),” Method and apparatus for preparing vinyl chloride using ethane and 1,2-dichloroethane (用乙烷和1,2-二氯乙烷制备氯乙烯的方法和设备),” China, CN 101356139 (2012)
5. Kim, S. W. et al., (제 1발명자:총 7인), “Vorrichtung zur Herstellung von Vinylchlorid durch Pyrolyse von 1,2-Dichlorethan, und Verfahren zur Herstellung von Vinylchlorid unter Verwendung derselben,” Germany, DE 112006001886 (2013)
6. Kim, S. W. et al., (공동발명자)“Method of producing valuable aromatics and olefins from hydrocarbonaceous oils derived from coal or wood,” Singapore, 등록번호 188984 (2013.12)
7. Kim, S. W. et al., (공동발명자) “流動層接触分解工程の軽質サイクルオイルから高付加価値の芳香族およびオレフィンを製造する方法, (The method for producing valuable aromatics and olefin from hydrocarbonaceous oils comprising aromatic compounds),” Japan, JP 5567022 (14.06.27)
8. Kim, S. W. et al., (공동발명자) “Method for producing high value aromatics and olefin from light cycle oil produced by fluidized catalytic cracking process,” US, US 8,912,377 (2014) (2014. 12. 16).
9. Kim, S. W. et al., (공동발명자) “Method for producing high-added-value aromatic products and olefinic products from an aromatic-compound-containing oil fraction,” US, US 8,975,462 (2014)
10. Kim, S. W. et al., (공동발명자) “Method of producing valuable aromatics and olefins from hydrocarbonaceous oils derived from coal or wood,” US, US 8,962,901 (2014)
4. Patent (국내 등록)
1. 김성원 외 2인 (제1발명자), 순환유동층의 하방 접선 공기주입식 비기계적 고체 재주입 장치, 한국특허 등록번호 10-0468690 (2000)
2. 김성원 외 5인 (공동발명자), 에틸렌 디클로라이드 열분해 반응기의 코크스 생성 억제코팅막 및 그 코팅막 형성 방법 (Coating film for inhibiting cokes formation in ethylene dichloride cracker and method for producing the same), 한국특허 등록번호 10-0753476 (2007)
3. 김성원 외 10인 (제1발명자), 에탄 및 1, 2 - 디클로로에탄을 이용한 염화비닐의 제조 방법 및 제조 장치 (Method for preparing vinyl chloride using ethane and 1,2-dichloroethane, and the apparatus therefor) 한국특허 등록번호10-0744478 (2007)
4. 김성원 외 10인 (공동발명자), 염수 전기분해용 전해조에서 비활성화된 전극의 재생 방법 (The method for generating deactivated electrode in the cell for electrolyzing salt water) 한국특허 등록번호 10-0837423 (2008)
5. 김성원 외 6인 (공동발명자), 천연가스중의 메탄을 이용한 비닐클로라이드 단량체의 합성 방법 (The method for preparing vinyl chloride monomer using methane in natural gas) 한국특허 등록번호 10-0843599 (2008)
6. 김성원 외 7인 (제1발명자), 유동층 반응 장치 (Fluidized bed reactor) 한국특허 등록번호 10-0843601 (2008)
7. 김성원 외 10인 (제1발명자), 천연가스중의 에탄을 이용한 비닐클로라이드 단량체의 합성 방법 (The method for preparing vinyl chloride monomer using ethane in natural gas) 한국특허 등록번호 10-0843605 (2008)
8. 김성원 외 5인 (공동발명자), 메탄으로부터 의 염화비닐의 제조 방법 (Preparation method of vinyl chloride from methane) 한국특허 등록번호 10-0843606 (2008)
9. 김성원 외 6인 (제1발명자), 1, 2 - 디클로로에탄의 열분해에 의한 염화비닐의 제조 장치 및 이를 이용한 염화비닐의 제조 방법 (Equipment of preparing vinyl chloride by pyrolysis of 1,2-dichloroethane and preparation method using the same) 한국특허 등록번호 10-0882312 (2009)
10. 김성원 외 12인 (공동발명자), 염화메탄으로부터 경질올레핀의 합성 방법 및 촉매 (The synthesis method and catalyst for methylchloride to light olefins) 한국특허 등록번호 10-0912332 (2009)
11. 김성원 외 12인 (제1발명자), 1, 2 - 디클로로에탄의 열분해 반응 시의 코크 제거 방법 및 이를 이용한 1, 2 - 디클로로에탄의 열분해 반응기(Method for removing the cokes during the pyrolysis of 1,2-dichloroethane and pyrolysis reactor using the same), 한국특허 등록번호 10-0964500 (2010)
12. 김성원 외 4인 (공동발명자), 탈염화수소용 고활성 촉매(High-Activity Catalyst for Dehydrochlorination), 한국특허 등록번호 10-0989747 (2010)
13. 김성원 외 12인 (공동발명자), 포화탄화수소로부터 클로로 화합물을 제조하는 방법(Method for preparing chlorinated compound from saturated hydrocarbon), 한국특허 등록번호 10-1017302 (2011)
14. 김성원 외 3인 (제1발명자), 1, 2 - 디클로로에탄의 촉매 분해반응에 의한 염화비닐의 제조 방법(Method of preparing vinyl chloride by catalytic cracking of 1,2-dichloroethane), 한국특허 등록번호 10-1056616 (2011)
15. 김성원 외 8인 (공동발명자), 메탄의 옥시클로리네이션 반응에 사용하는 클로로금속화합물 촉매 및 이를 이용한 클로로화합물 제조 방법(Chlorometal compound catalyst used in Oxychlorination of methane and method for producing chlorocompound using same), 한국특허 등록번호 10-1108801 (2012)
16. 김성원 외 9인 (공동발명자), 방향족 화합물을 포함하는 유분으로부터 고부가 방향족 제품 및 올레핀 제품을 생산하는 방법(The method for producing valuable aromatics and olefin from hydrocarbonaceous oils comprising aromatic compounds), 한국, 등록번호 10-1173345 (2012)
17. 김성원 외 9인 (공동발명자), 에틸렌디클로라이드 열분해용 촉매(Catalyst for cracking of ethylenedichloride), 한국특허 등록번호 10-1108858 (2012)
18. 김성원 외 12인 (공동발명자), 1, 2 - 디클로로에탄으로부터 염화비닐을 제조하는 방법(Method for preparing vinyl chloride from 1,2-dichloroethane), 한국특허 등록번호 10-1114363 (2012)
19. 김성원 외 9인 (공동발명자), 방향족 화합물을 포함하는 유분으로부터 고부가 방향족 제품 및 올레핀 제품을 생산하는 방법(The method for producing valuable aromatics and olefin from hydrocarbonaceous oils comprising aromatic compounds), 한국, 등록번호 10-1173345 (2012)
20. 김성원 외 12인 (공동발명자), 신규한 염화비닐 단량체 제조방법 (NOVEL METHOD FOR THE PRODUCTION OF VINYL CHLORIDE MONOMER) 한국 등록번호 10-1236099 (2013)
21. 김성원 외 12인 (공동발명자) 유동층 접촉 분해 공정의 경질 사이클 오일로부터 고부가 방향족 및 올레핀을 제조하는 방법 (Method for producing high value aromatics and olefin from light cycle oil produced by fluidized catalytic cracking process) 한국 등록번호 10-1503069 (2015)
22. 김성원 외 18인 (공동발명자) 석탄 또는 나무에서 산출되는 탄화수소 유분으로부터 고부가 방향족 제품 및 올레핀 제품을 제조하는 방법 (THE METHOD FOR PRODUCING VALUABLE AROMATICS AND OLEFINS FROM HYDROCARBONACEOUS OILS DERIVED FROM COAL OR WOOD) 한국 등록번호 KR 10-1735108 (2017)
23. 김성원, 박새한, 이민지, 김수영, 입자기반 태양열 흡열기용 탄소나노튜브 비드 열흡수체 및 이의 제조방법 (Carbon nanotube bead for directly-irradiated particle receiver and manufacturing method thereof) 한국 출원번호 제 10-2021-0112411호, 등록번호 제 10-2616272호 (2021) (등록일자 : 2023.12.15)
24. 김성원, 박새한, 김수영, 확대된 광노출 구조를 갖는 입자기반 태양열 흡수장치 (DEVICE THAT ABSORBS SOLAR HEAT BASED ON PARTICLES AND HAS AN ENLARGED EXPOSURE STRUCTURE TO LIGHT) 한국 등록번호 제 10-2361493 (2022) (등록일자 : 2022.02.07)
25. 김성원, 김수영, 고유진, 장예지, 원근혜, 태양열로부터 금속을 용융하는 금속 용융 장치 및 이를 이용한 금속 용융 방법 (Device for metal melting using solar heat and Method for metal melting using the same) 한국 출원번호 제 10-2022-0063583호 (2022); PCT/KR2023/006996 (23년 5월 23일) 한국 등록번호 제 10- 2715679 (2024) (등록일자 : 2024.10.04).
26. 김성원, 원근혜, 김수영, 고유진, 장예지, 재사용 가능한 탄소나노튜브 유흡착제 및 그 제조방법 (Reusable carbon nanotube oil adsorbent and manufacturing method thereof) 한국 출원번호 제 10-2023-0090134호 (2023) (23년 7월 12일).
3. Key Presentation
1. “Bubbling Fluidizing Beds,” Tutorial-1: 유동층 반응기 입문, 춘계 한국화학공학회, 창원 (2011)
2. “High Velocity Fluidization,” Tutorial-2: 유동층 반응기 입문, 추계 한국화학공학회, 인천 (2011)
3. “Circulation System,” Tutorial-3: 유동층 반응기 입문, 춘계 한국화학공학회, 제주 (2012)
4. “Design of Catalytic Reactors,”Tutorial-5: 유동층 반응기 입문, 춘계 한국화학공학회, 광주 (2013)
5. “Bubbling Fluidized Beds,” Tutorial-6: 유동층 반응기 입문, 추계 한국화학공학회, 대구 (2013)
4. Conferences
A. Domestic proceeding paper
1. Kim, S.W., Namkung, W. and Kim, S.D., "A Study on Loop-Seal Characteristics in a Circulating Fluidized Bed," Theories and Applications of Chem. Eng., 1(2), 1053-1056 (1995)
2. Kim, S.W., Namkung, W. and Kim, S.D., "A Characteristics of Solid Recycle System in a Circulating Fluidized Bed," Spring National Meeting of Korea Soc. Energy Eng., Seoul, 53-56 (1996)
3. Kim, S.W., Namkung, W. and Kim, S.D., "A Characteristics of Solid Recycle System with Loop-Seal in a Circulating Fluidized Bed," Theories and Applications of Chem. Eng., 2(2), 2339-2342 (1996)
4. Namkung, W., Kim, S.W. and Kim, S.D., "Determination of Transition Velocity to Turbulent Fluidization," Autumn National Meeting of Korea Soc. Energy Eng., Seoul, 157-160 (1996)
5. Namkung, W., Kim, S.W. and Kim, S.D., "Characteristics of Flow Regime Transition in a Fast Fluidized Bed," Theories and Applications of Chem. Eng., 3(1), 1057-1060 (1997)
6. Kim, S.W., Namkung, W. and Kim, S.D., "Characteristics of Bubble Properties in a FCC Regenerator," Theories and Applications of Chem. Eng., 4(1), 837-840 (1998)
7. Kim, S.W., Namkung, W. and Kim, S.D., "Hydrodynamic Characteristics in Freeboard of a FCC Regenerator," Spring National Meeting of Korea Soc. Energy Eng., Seoul, p. 173-176 (1998)
8. Kim, S.W. and Kim, S.D., "Effect of Particle Size on Solid Recycle Characteristics on Loop-Seal in a Circulating Fluidized Bed," Theories and Applications of Chem. Eng., 5(1), 945-948 (1999)
9. Kim, S.W. and Kim, S.D., "A Solids Flowmeter for Continuous Solids Flow Measurement in a Circulating Fluidized Bed," Theories and Applications of Chem. Eng., 5(2), 3125-3128 (1999)
10. Kim, S.W., Ahn, J. Y. and Kim, S.D., "Effects of Particle Size and Density on Solid Recycle Characteristics of Loop-Seal in a Circulating Fluidized Bed," Autumn National Meeting of Korea Soc. Energy Eng., Seoul, (1999)
11. Kim, S.W., Ahn, J. Y. and Kim, S.D., "Prediction of Solid Holdup Distribution in a Riser with Exit Effect of a Circulating Fluidized Bed," Spring National Meeting of Korea Soc. Energy Eng., Suwon, 143-146 (2000)
12. Kim, S.W., Ahn, J. Y. and Kim, S.D., "Pressure Balance Model for a Circulating Fluidized Bed," Theories and Applications of Chem. Eng., 6(2), 3505-3508 (2000)
13. Ahn, J.Y., Kim, S.W., and Kim, S.D., "Bubble Characteristics in a Fluidized Bed Heat Exchanger of a Circulating Fluidized Bed," Theories and Applications of Chem. Eng., 6(2), 3509-3512 (2000)
14. Kim, S.W., Ahn, J. Y. and Kim, S.D., "Characteristics of Heat Transfer and Bubble around Horizontal Tube in a Fluidized Bed Heat Exchanger," Autumn National Meeting of Korea Soc. Energy Eng., Seoul, 97-100 (2000)
15. Kim, S.W., Ahn, J. Y., Lee, D.H. and Kim, S.D., "Heat Transfer around Horizontal Tube in a Fluidized Bed Heat Exchanger," Theories and Applications of Chem. Eng., 7(1), 1169-1172 (2001)
16. Kim, S.W., Jung, D.S., Lee, D.H. and Kim, S.D., “Solids Flow and Heat Transfer Characteristics of Loop-seal with Horizontal Tube Bundle in a Circulating Fluidized Bed,” Theories and Applications of Chem. Eng., 7(2), 3751-3754 (2001)
17. Kim, S.W., Kirbas, G., Bi, H., Lim, C.J. and Grace, J.R, "Study on gas-solid flow behavior in high-density circulating fluidized beds," Theories and Applications of Chem. Eng., 10(1), 773 (2004)
18. Go, K.S., Sohn, S.Y., Lee, Y.H., Kim, S.W. and Kim, S.D., "" Theories and Applications of Chem. Eng., 12(2), 2313 (2006)
19. Koo, B.S, Kim, S.W. and Lee, D.H., “Characteristics of Fast Pyrolysis from Jatropha Seedshell Cake in a Fluidized Bed Reactor”, Proceedings of KIChE Meetings, Spring, 252 (2010)
20. Koo, B.S, Kim, S.W., Kim, C.J. and Lee, D.H, “Bio-oil production from Jatropha Seedshell Cake in a Bubbling fluidized bed reactor”, Proceedings of KSCT Meetings, 162-165 (2010)
21. Cho, H.T., Kim, J.H., Kim, S.W., Go, K.S., Kim, C.J. and Moon, I., “Forecasting deposit formation at reactor cyclone in RFCC using CPFD,”Proceedings of KIChE Meetings, Fall, 137 (2010)
22. Cho, H.T., Cha, B.J., Ryu, J.W., Kim, S.W. and Moon, I., Simulation of the gas-solid flow pattern for distribution in the riser and the cyclone of RFCC process using CPFD,”Theories and Applications of Chem. Eng., 18(2), 2184 (2012)
23. Cho, H.T., Cha, B.J., Kim, S.W., Ryu, J.W., Kim, J.H., Kim, J.K. and Moon, I., Numerical analysis of gas-solid flow pattern in the riser of RFCC process using CPFD simulation,” Proceedings of 28th ICRO Conference, 564-565 (2010)
24. Kim, S.W., “Fluidization theory and applications in fluid catalytic cracking process,” Theories and Applications of Chem. Eng., (2015)
B. International proceeding paper
1. Kim, S.W., Namkung, W. and Kim, S.D., "Solids Recycle Characteristics of an Improved Loop-Seal in a Circulating Fluidized Bed," Proc. of the 10th symp. on Chem. Eng. Taejon/Chungnam -Kyushu, Taejon, Korea 149-150 (1997)
2. Kim, S.W., Namkung, W. and Kim, S.D., "Hydrodynamic Characteristics of a FCC Regenerator," Proc. of the 11th symp. on Chem. Eng. Kyushu-Taejon/Chungnam, Fukuoka, Japan, 183-184 (1998)
3. Kim, S.W., Namkung, W. and Kim, S.D., "Bubble/Void Properties in a FCC Regenerator,” Proc. of 6th Asian conference on Fluidized-Bed and Three-phase reactors, Eds. by H. S. Chun and S. D. Kim, Cheju, Korea, 43-48 (1998).
4. Kim, S.W., Ahn, J. Y. and Kim, S.D., “Pressure Balance Model for a Circulating Fluidized Bed with Loop-Seal," Proc. of 7th Asian conference on Fluidized-Bed and Three-phase reactors, Eds. by S. Uchida and S. Morooka, Shizuoka, Japan 31-36 (2000)
5. Kim, S.W., Ahn, J. Y., Lee, D. H. and Kim, S.D., "Continuous Measurement of Solid Flow in a Circulating Fluidized Bed," Proc. of International Symposium on Chem. Eng., Eds. by S. D. Kim, C. H. Lee, J. K. Lee and Y. Kang, Cheju, Korea 297-304 (2001)
6. Kim, S.W., Ahn, J. Y., Lee, D. H. and Kim, S.D., " Heat Transfer and Bubble Characteristics in a Fluidized Bed Heat Exchanger," Proc. of 6th World Congress on Chem. Eng., Melbourne, Australia, Paper no. 647 (2001)
7. Kim, S.W., Lee, D. H. and Kim, S.D., "Pressure Balance Model for Circulating Fluidized Bed with Loop-seal,” Circulating Fluidized Bed Technology VII, Eds. by J. R. Grace, J.-X. Zhu and H. de Lasa, Can. Soc. Chem. Eng., Ottawa, Canada, 521-528 (2002).
8. Kirbas, G., Kim, S.W., Bi, X., Lim, J. and Grace, J.R., “Radial Distribution of Local Concentration Weighted particle Velocities in High Density Circulating Fluidized Beds,” Fluidization XII, Eds. By F. Berruti, X. Bi and T. Pugsley, ECI, Vancouver, Canada
71-78 (2007)
9. Prark, D.K., Kim, S.D. and Kim, S.W., “Pyrolysis Characteristics of Jatropha Seed Shell Waste in a Fluidized Bed Reactor,” 2010 International Conference on Chemical engineering and Application (CCEA 2010), IACSIT, Singapore, Singapore A044 (2010)
10. Kim, S.W., Kim, G.R., Shin, J.W., Yoo, I.S., Kang, H.S. and Park, S.H., “Fluidization Technology for Stable Startup of Commercial FCC Unit,” Fluidization XIII, Eds. By S.D. Kim, Y. Kang, J.K. Lee and Y.C. Seo, ECI, Gyeong-ju, Korea 773-780 (2010)
11. Koo, B.S, Kim, S.W., Kim, C.J., Won, S.H. and Lee, D.H, “Oil Yield of Jatropha curcus L. Seedshell Cake in a Fluidized Bed Pyrolyzer”, International Conference on Biomass Energy Technologies, Beijing, China, 233 (2010)
12. Kim, S.W., Koo, B.S., Ryu, J.W., Lee, J.S., Kim, C.J., Lee, D.H., Kim, K.R. and Choi, S., “Bio-oil from Pyrolysis of Palm and Jatropha Wastes in Fluidized Bed,” 6th Asia Pacific Chemical Reaction Engineering Symposium (APCRE’11), CAS, Beijing, China,
204 (2011)
13. Cho, H.T., Cha, B.J., Ryu, J.W., Kim, S.W. and Moon, I., “CPFD Simulation for Particle Deposit Formation in Reactor Cyclone of RFCC,” 11th International Symposium on Process Systems Engineering (PSE 2012), NUS and ICES, Singapore, Singapore,
HP3-1 (2012)
14. Jang, T.Y., Bae, S.H.., Kim, S.W. and Ryu, J.W., “High Efficiency Quench Device for Fixed Bed Reactor,” International Workshop on Process Intensification 2012 (IWPI 2012), KIChE and Korea University, Seoul, Korea, 81 (2012)
15. Cho, H.T., Cha, B.J., Ryu, J.W., Kim, S.W., Kim, J.H. and Moon, I., “Numerical analysis of gas-solid flow pattern for the uneven distribution of particle through the RFCC riser,” 6th International Conference on Process Systems Engineering (PSE ASIA),
Kuala Lumpur, Malaysia, 74-79 (2013)
16. Cho, H.T., Cha, B.J., Ryu, J.W., Kim, S.W., Kim, J.H. and Moon, I., “Gas-Solid Flow Pattern Analysis in the Riser of Rfcc Process Using CPFD Simulation,” 2013 AIChE Annual Meeting, San Francisco, US, 55g (2013)
17. Park, S.H., Kim, D.Y., Lee, M.J., Yeo, C., Kim, S.W., “Effect of nanotube shape on agglomeration of carbon nanotube particles in dilute phase of a fluidized bed,” 30th International Symposium on Chemical Engineering, Daejeon, Korea, REA-P17 (2017).
18. Park, S.H., Kim, S.W., “Visualization of carbon nanotube aggregates in dilute phase of a fluidized bed,” International Conference on Next-Generation Convergence Technology (ICNCT2018), Bangkok, Thailand, 226-227 (2018).
19. Lee, M.J., Park, S.H., Kim, S.W., “Hydrodynamics of Vertically Aligned Carbon Nanotube Particles in a Fluidized Bed,” Proceeding of 23rd International Conference on FBC, Seoul, Korea, 1220-1225 (2018)
20. Kim, S.W., “Measurement of solid volume fraction in a fluidized bed of carbon nanotube particles by 2D imaging method,” Smart Convergence of Culture Technology, IICCC 2018, DongNai Univ., Vietnam, 223-224 (2018).
21. Kim, S.W. and Park, S.H., “Development of a fluidized bed gas heater using solar heat for waste steam reuse in the plant,” Proceeding of 2019 2nd International Conference on Sustainable Development of Water and Environment, ICSDWE2019,Regall Hotel,
Hong Kong, China, 11 (2019).
22. Kim, S.W. and Park, S.H., “Development of a fluidized bed gas heater using solar heat for waste steam reuse in the plant,” Sustainable Development of Water and Environment (ISBN: 978-3-030-16728-8), H.C. Rong and L. Fei Eds., Springer Professional, 73-
79 (2019). (DOI:10.1007/978-3-030-16729-5_8)