Industrial

Electronics analog and digital circuit design, Infusion Innovations Pty. Ltd, Adelaide, SA, Australia (March 2023- Now)

• Infusion pump design (Entire circuitry including control and monitoring)

• Control circuit for the infusion process (Feedback, protection, and sensor design to provide human safety)

• Monitoring and control system (Software for Windows using Processing)

• Monitoring system (Hardware and programming)

• Wireless data transmission

• Power and Signal Integrity

• Antenna Design

R&D at Sovereign Propulsion Systems (SOVPS) Pty. Ltd, Adelaide, SA, Australia (May 2022 - December 2022)

• Design of 100 kW and 200 kW Axial Flux Permanent Magnet (AFPMSM) Machines

R&D at MyModular Pty. Ltd, Adelaide, SA, Australia (January 2021 - May 2022)

• Design and construction of 1.5kW switching power supply including, EMI filter, power factor correction circuit with SiC-MOSFET, and ZVS H-bridge

• Design and construction of a control and monitoring panel for a 1.5kW power supply

• ELVDC lighting system

Researcher at the University of Adelaide, Adelaide, SA, Australia (March 2020 - December 2022)

• Small-scale wind generators using soft magnetic composites

• Experimental testing of electric machines to predict efficiency map

R&D director at the Eram Sanat Mooj Gostar (ESMG) Company, Shiraz (February 2016 - March 2020)

•  Design 20kV 7km Transmission Line

•  Design 4 distribution substations

•  Design industrial network and motor drive system for 5 different wells 

•  Design industrial network, monitoring system, and motor drives for Reverse osmosis (RO) system 

•  Design 30kW grid-tied solar power plant 

•  Design and construction of a beetroot sugar analyzer consists of 6 induction machines and 24 electric valves for Fasa Sugar Company 

•  Supervisor of the installation of three streets and two huge bridges lighting systems. 

• Tele Protection System design and construction as a Backup protection system for power system substations for Fars Regional Electric Company 

• Automation of fluid injection to bottles for Razi Vaccine and Serum Research Institute

• Design and construction of a DC-AC converter and its protection system to drive PIEZO-Electric

• Supervisor of construction of 20kV substations.

•  Supervisor of installation of 20kV transmission lines. 

•  Implementation of a torque control drive for induction spindle motor

•  Design and construction of a four-quadrant drive system for 250 watts spindle motor

•  Vibration and position control of a flexible two-part arm by using PIEZO-electric actuator

• Read and write on a Modbus RTU protocol by means of a Raspberry Pi processor to monitor compressors and control them.

•  Alarm Unit design and construction for power substations monitoring and control

Internship period at Fars Regional Electric Company-Iran (May 2013 - September 2013)

•  Gas Insulation Substations Studies

•  Power system analysis using Dig-Silent and Etap to determine the optimum locations for capacitor compensators