TV Lifts

With a push of the button, you can raise or lower your TV inside the cabinet. Perfect for homes, offices, RVs, yachts, and hotels. The TV lift was designed and developed by Danish firm, VENSET, with these principles in mind : Quality, Reliability, Simplicity, Affordability, Design, and Function. You can be assured of its long-lasting value.

TS700A│1000A

TV Lift

Stroke: 700mm / 1000mm

Compliance with max. TV height: 700mm / 1000mm

Max. working loads: 65 kg (by standard installation) 29 kg (when lift is mounted upside down) 100 kg peak load

Duty cycle: max 2 min. continuously Speed: 28 mm/sec (unloaded)

Consumption: 60 W (max. 120 Watts); Standby: Max 0,9 Watts Operating system: Rocker switch and RF remote system (Radio frequency – 433,92Hz)

All of our TV lifts employ a rack & pinion design for a proven, durable stability system. They are delivered complete in one carton and include:

Wireless remote control (RF)
Manual push switch
Adjustable lid lifter
Installation instructions.

Installation requires less than 3 inches of depth behind the TV.

TS700 TV Lift

Download Drawing (DWG)

Download Drawing (PDF)

For VESA:

400x300, 400x200, 400x100, 300x300, 200x200, 200x100, 100x100

TS1000 TV Lift

Download Drawing (DWG)

Download Drawing (PDF)

For VESA:

600x400, 600x200, 600x100, 400x400, 400x200, 400x100, 300x300, 200x200, 200x100

1. If you wish to change the default stroke length of the lift, please inform our sales team before delivery.

2. Please provide minimum 1 cm allowance from top of TV during planning.

3. Please inform the TV lift installer :

a. Ensure a minimum weight load of 5 kg before testing the lift.

b. Do not place the lift flat on the floor when operating it. Do not operate the lift continuously for more than 2 minutes to prevent the motor from overheating.

c. For reverse installation, adjust the pin position and do a test run to ensure it works properly.

Case Studies

Keep the TV out of sight, spend quality time with family and friends

[TV Storage Application │ Bed by the Window ]

People are paying more attention to the use of natural light in the interior space. Natural light is streamed through the windows to the space, where it is an integration of bed, storage, doing activities like tea appreciation, gazing out of the windows and enjoying moments of silence. The integrated TV can be raised at night to enjoy audio-visual entertainment. It can be lowered and hidden in the cabinet to free up space.

Electric TV Lift│anti-squeeze-auto reverse function

Open the remote receiver box, move Jumper D from right position (default) to left position.

Tips on Upside Down Mounting

Only one simple step is required - move the jumper D from right to left position

Tips for upside down mounting

1. Place the remote receiver box and power supply in a place that is accessible.

2. TS700A/1000A : Max load for upside down mounting 5-29 kg (Min 5 kg load is required for test run).

3. Inform the users things to take note.

4. If TV lift is unable to operate due to a short circuit or power failure, re-plug the 6-pin signal cable once the power is restored.

5. Please do not lift items that exceed the max weight load or too wide. Do not hesitate to contact us if need help on your design.

Users to take note :

1. After mounting the lift upside down, the remote control will be reversed.

2. Please do not operate the lift continuously for for more 2 minutes to prevent the motor from overheating.

Warranty : 2 years from date of delivery/collection

EU safety certification : download

Venset A/S

Venset is the leading brand of lifting hardware from Denmark. Their products are easy and safe (all CE certified) to use and install and meet the expectations of today's consumers.

By introducing Venset in Singapore, Flexiwork hopes that people here can enjoy the joy and convenience brought by their products.

TV Lift │Change of battery in emitter

Procedure for changing of battery in emitter

When the emitter is not sensitive, check if there is blue light in the emitter.

1. Loosen the screws, remove the lid on the back and remove the battery.

2. Place a new battery, cover with the lid and tighten the screws.

3. After changing the battery, press and hold the button. If the blue light appears, the emitter is working properly.

Battery type 27A-12V are easily available from stores.

Google Sites

Report abuse