Publications of M.Tech Scholars

International journal

1. 
   

2. M. K. Pradhan* and Amar Pradhan, Experimental Investigation of Mechanical Properties of High-Temperature Ni-Based Superalloy by Varying the Wt. % of Aluminum, International Journal of Microstructure and Materials Properties, Inderscience, UK, Vol. -13, No.--XX, pp,2018

3. Pradhan, M. K., & Tiwari, A. (2018). Modelling and optimisation of end milling parameters on Ti-6Al-4V titanium alloy using TLBO algorithm and TOPSIS algorithm. International Journal of Machining and Machinability of Materials, 20(6), 513-535.

4. Pradhan, M. K., & Pradhan, A. (2018). Experimental investigation of mechanical properties of high-temperature Ni-based super alloy by varying the wt.% of aluminium. International Journal of Microstructure and Materials Properties, 13(3-4), 213-227.

5. Shukla, M., Dhakad, S. K., Agarwal, P., & Pradhan, M. K. (2018). Characteristic behaviour of aluminium metal matrix composites: a review. Materials Today: Proceedings, 5(2), 5830-5836.

6. M. K. Pradhan* and Pankaj Gupta "Fault Detection Using Vibration Signal Analysis of Rolling Element Bearing in Time Domain using an Innovative Time Scalar Indicator" Int. J. of Manufacturing Research (IJMR) Inderscience, UK, Vol-12, No -3, pp-, 2017.

7. M. K. Pradhan* and S. Tiwati, "Investigation of Mechanical Properties and Electrical Discharge Machining of LM25-RHA Metal Matrix Composite " Int. J. of Machining and Machinability of Materials Special Issue on: Advances in the Machining of Composite Materials III, Inderscience, UK, Vol-19, No - 5, pp-457-482, 2017.

8. Manish Shukla, Pankaj Agarwal, M. K. Pradhan S.K. Dhaka, "Experimental Investigation of EDM Parameters on Al-LM6/SiC/B4C Hybrid Composites", Applied Mechanics and Materials, Volume-877, Pp:149-156, Trans Tech Publications, Switzerland

9. M. K. Pradhan, Tiwari A. Modeling and Optimization of End Milling Parameters on Ti-6Al-4V Titanium Alloy using TLBO Algorithm and TOPSIS Algorithm, International Journal of Machining and Machinability of Materials Inderscience, UK, Vol-20, No - 1, pp-, 2018.

10. Shukla M, Dhakad SK, Agarwal P, M. K. Pradhan. Characteristic behavior of aluminum metal matrix composites: A review. Materials Today: Proceedings. 2018 Dec 31;5 (2): 5830-6.

11. Goyal R, M.K. Pradhan. Optimization of Theory of Failures of Multi-directional Composite Laminates: AHP approach. Materials Today: Proceedings. 2018 Dec 31; Volume 5, Issue 2, Part 2, 2018, Pages 6940-6945

12. M. K. Pradhan* and S. Tiwari, "Effect of rice husk ash on properties of aluminium alloys: A Review" Materials Today: Proceedings, Volume 4, Issue 2, Part A, 2017, Pages 486-495

13. Atul Tiwari and M. K. Pradhan Applications of TLBO algorithm on various manufacturing processes: A REVIEW" Materials Today: Proceedings, Volume 4, Issue 2, Part A, 2017, Pages 1644-1652

14. Ayush Rathore and M. K. Pradhan "Hybrid Cellulose Bio nanocomposites from banana and jute fibre: A Review of Preparation, Properties and Applications" Materials Today: Proceedings, Volume 4, Issue 2, Part A, 2017, Pages 3942-3951

15. Pankaj Gupta and M. K. Pradhan "Fault detection analysis in rolling element bearing: A review" Materials Today: Proceedings, Volume 4, Issue 2, Part A, 2017, Pages 2085-2094

16. M. K. Pradhan, Jain, Mohit; Preparation and Testing of Mechanical and Micro-Structural Properties of Nano cellulose Rubber Composite: A brief review Journal on Material Science 5 1 29-40 2017 i-manager’s

17. Prabhat R Kumar, Mohan K Pradhan, Improvement in Mechanical Property of Aluminium Alloy LM-6 Reinforcement with Silicon Carbide and Boron Carbide Particles, Journal on Material Science, Volume: 4 No. 1, Pages: 26-31, Issue: Apr-Jun 2016

18. Jain, Mohit, and M. K. Pradhan*. "Morphology and mechanical properties of sisal fiber and Nano cellulose green rubber composite: a comparative study. “International Journal of Plastics Technology: Volume: 20, No. 2, Pages: 338-400, 2016

19. Parsuram Sah Turaha Mohan K Pradhan, “Concept on single actuating braking system for two wheeler", Int. Journal of Design and Manufacturing Technologies, Vol.-9, No-1, pp-12-15, January,2015, http://journals-sathyabama.com/archives/dmt/vol9-no1-intl-paper-mech-3.pdf

20. Ashutosh Mishra, Mohan K Pradhan, Assessment of Theories of Failure for Multi-directional Composites, Laminates: A Fuzzy-AHP approach, Materials Science Forum Vols. 830-831 (2015) pp 721-726 © (2015) Trans Tech Publications, Switzerland doi: 10.4028/www.scientific.net/MSF.830-831.721

21. S. K. Majhi, Mohan K Pradhan, Hargovind Soni “Optimization of EDM parameters using an integrated approach of RSM, GRA and entropy method”, International Journal of Applied Research in Mechanical Engineering (IJARME), Interscience Vol-3, Issue 1, Pages 82–87, 2013.ISSN: 2231 –5950

22. H. Soni, T. K. Mishra, and Mohan K Pradhan, Multi-Response Optimization of EDM Parameters by Grey-PCA Method, International Journal of Current Engineering and Technology, Vol.3, No.5 (December 2013), ISSN 2277- 4106, pp:1941-1945.

23. S.K.Majhi, T.K.Mishra, Mohan K Pradhan and H. Soni, Effect of Machining Parameters of AISI D2 Tool Steel on Electro Discharge Machining, International Journal of Current Engineering and Technology, Vol.4, No.1 (Feb.2014), pp: 19-23, ISSN 2277 - 4106,

Conference Papers

1. Vipin Dahiya, M. K Pradhan, R. K. Patel, Optimization of EDM Parameters On LM6 Silicon Carbide Boron Carbide Hybrid Composite Using Taguchi Based Multi-MOORA Method, National Conference on National Conference on RECENT ADVANCES IN MANUFACTURING TECHNOLOGIES, Gargi Memorial Institute of Technology Kolkata April 5 th - 6 th , 2019 In Association With The Indian Institute of Welding

2. Ajay Pratap Singh, M. K Pradhan, R. K. Patel, ANALYSIS OF TRIBOLOGICAL BEHAVIOR OF ALUMINUM ALLOY AND THEIR HYBRID COMPOSITES National Conference on National Conference on RECENT ADVANCES IN MANUFACTURING TECHNOLOGIES, Gargi Memorial Institute of Technology, Kolkata April 5 th - 6 th, 2019 In Association With The Indian Institute of Welding

3. Y.K. Sahu and M.K. Pradhan, Modelling and Simulation of Deep Drawing Process of Circular Cup on AL1200 using Finite Element Analysis, 7th International and 28th All India Manufacturing Technology, Design and Research Conference 2018 (AIMTDR 2018)

4. Manish Shukla et al and M.K. Pradhan" "Characteristic Behavior of Aluminium Metal Matrix Composites: A Review" souvenir of 7th International Conference of Materials Processing and Characterization, (ICMPC 2016), during 17-19 March 2017, ICMPC SOUVENIR organized by GRIET, Hyderabad. pp-174

5. Rahul Goyal, and M. K. Pradhan, “Optimization of Theory of Failures of Multi-directional Composite Laminates: AHP approach” Souvenir of International Conference on Emerging Trends in Materials and Manufacturing Engineering, March 10-12, 2017 organized by the Department of Metallurgical and Materials Engineering, NIT, Tiruchirapalli, India

6. M. K. Pradhan, Manish Gangil, Prabhat Ranjan Kumar, “Application of MCDM for optimization of EDM of LM 6 Silicon Carbide Boron Carbide hybrid composite” 6th International and 27th All India Manufacturing Technology, Design and Research (AIMTDR 2016), DECEMBER 16-18, 2016. pp-557-562 COLLEGE OF ENGINEERING, PUNE

7. Atul Tiwari, and M.K. Pradhan” Applications of TLBO algorithm on various manufacturing process processes: A Review, 5th International Conference of Materials Processing and Characterization, (ICMPC 2016), during 12-13 March 2016, ICMPC SOUVENIR organised by GRIET, Hydrabad.pp-84.

8. Ayush Rathore and M.K. Pradhan, “Hybrid cellulose, bio-Nano-composites from banana and jute fibre: A review of preparation, properties and applications, souvenir of 5th International Conference of Materials Processing and Characterization, (ICMPC 2016), during 12-13 March 2016, ICMPC SOUVENIR organized by GRIET, Hydrabad.pp-195

9. Pankaj Gupta, and M. K. Pradhan “Fault detection analysis in rolling element bearing: A review, 5th International Conference of Materials Processing and Characterization, (ICMPC 2016), during 12-13 March 2016, ICMPC SOUVENIR organized by GRIET, Hyderabad. pp-105

10. Srikant Tiwari, and M. K. Pradhan “Effect of rice husk ash on properties of aluminium alloys: A Review”, 5th International Conference of Materials Processing and Characterization, (ICMPC 2016), during 12-13 March 2016, ICMPC SOUVENIR organized by GRIET, Hyderabad. pp-22

11. Ashutosh Mishra, M.K. Pradhan, Parwez Alam, Optimization of Process-based Transformer Industry using Hybridization of Fuzzy-AHP and DEA by Improvement Heuristic ‘CRAFT’ 57th National Convention of Indian Institution of Industrial Engineering & 3rd International Conference on Industrial Engineering ICIE 2015, 619, during November 26–28, 2015, Organized by Indian Institution of Industrial Engineering (IIIE), NHQ- Mumbai Hosted by Indian Institution of Industrial Engineering (IIIE), Surat Chapter S. V. National Institute of Technology, Surat. .

12. Ashutosh Mishra, M.K. Pradhan, Supriya Kabra Assessment of Theories of Failure for Multi-Directional Composites, Laminates: A Fuzzy-AHP approach, International Conference on Advanced Materials and Manufacturing Processes for Strategic Sectors-2015 (ICAMPS-2015) " during 13-15th May 2015, Kovalam, Trivandrum, India, Chapter 7: Ceramics and Composites, topic-95, pp-402-405,2015

13. Rishi Kumar, Mohan K Pradhan, Rajesh Kumar, " Modeling and Optimization of milling parameters on Al6061 alloy using genetic algorithm" Proceedings of the 5th International & 26th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, IIT, India. Vol -1, pp-89.1-89.6, 2014. http://www.iitg.ernet.in/aimtdr2014/PROCEEDINGS/papers/89.pdf

14. Rajesh Kumar, Mohan K Pradhan, Rishi Kumar, "Modeling and optimization of end milling parameters on aluminium 6061 alloys using GRA based Taguchi method coupled with PCA " Proceedings of the 5th International & 26th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, IIT Guahati, India. Vol -1, pp-90.1-90.6, 2014.http://www.iitg.ernet.in/aimtdr2014/PROCEEDINGS/papers/90.pdf

15. Ashish Chauhan, Mohan K Pradhan, "Selection of Non-Conventional Manufacturing process: A Combine TOPSIS-AHP Approach, Proceedings of the 5th International & 26th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, IIT Guahati, India. Vol -1 , pp-99.1-99.6, 2014. http://www.iitg.ernet.in/aimtdr2014/PROCEEDINGS/papers/99.pdf

16. Rishi Kumar, J. K Nath, Mohan K Pradhan, Analysis of Laminated Composite Using MATLAB” Proc. 1st International Conference on "Mechanical Engineering: Emerging Trends for Sustainability" during January 29-31, Vol -1, pp-9-17, 2014.

17. Avinash Chaudhury; Mohan K Pradhan Finite Element Analysis of Electro Discharge Machining Using ANSYS, Proc. 1st International Conference on "Mechanical Engineering: Emerging Trends for Sustainability" during January 29-31, Vol -1, pp-18-26, 2014.

18. Sanjay K Majhi; Mohan K Pradhan; Hargovind Soni, Investigation of Optimal Parameters of EDM Process Using Grey-PCA Analysis Proc. 1st International Conference on "Mechanical Engineering: Emerging Trends for Sustainability" during January 29-31, Vol -1, pp- 334-342, 2014

19. Hargovind Soni, Mohan K Pradhan, Sanjay Kumar Majhi, the influence of EDM parameters on SR, MRR, ROC using the Gray - Entropy approach on P-20 steel, Proc. 1^st International Conference on "Mechanical Engineering: Emerging Trends for Sustainability" during January 29-31, Vol -1, pp- 326-333, 2014

20. Sanjay K. Majhi, Mohan K Pradhan, Hargovind Soni, “Application of integrated RSM-GREY-Entropy Analysis for Optimization of EDM parameters” Proc. of International Conference on Advanced Research in Mechanical Engineering, 21^st April-2013, Coimbatore, India.

21. Hargovind Soni, Mohan K Pradhan, Sanjay Kumar Majhi, Tribhuwan Mishra “Multi-response optimization of EDM using gray-PCA Approach” Proc. International Conference on Emerging Materials Technology, ICEMT 2013 8-10^th April 2013 at Gyan Ganga Institute of Technology & Sciences, Jabalpur (M.P.), India,