last update: Jan. 14 2023
Download Catalog & Brochure Download Technical Specification
Download User Manual Download The Warranty & Service Our Experience / Project
Protected transformers (CSP Type)are available with a variety of protection options including a secondary breaker with weak link for secondary fault and overload protection, a primary weak link fuse, current-limiting fusing for high interrupting ratings and limiting fault currents, and internal or external lightning arresters.
Standard Ratings / Single Phase
5, 10, 15, 25, 37.5, 50, 75, 100, 167, 250, 333, 500 KVA
Standard High-voltage & insulation level (BIL)
7620/13200Y BIL: 95KV
13200/22860Y BIL: 125KV
13800/23900Y BIL: 125KV
14400/24940Y BIL: 125KV
34500GrdY/19920 BIL: 150KV
Standard de-energized before operating the tap changer
Two - 2½% taps above and below rated voltage
Standard secondary voltage & insulation level (BIL)
The basic insulation level (BIL) of the secondary voltage shall be 30 kV.
120/240 (3 bushings)
240/480 (3 bushings)
120 (2 bushings)
277 (2 bushings)
Standard Accessories:
Externally operated off- load tap changer
Pressure relief device
Stainless Diagrammatic name plate
Ground strap and bolt on Tank & LV
Standard Accessories for CSP Type :
Externally operated off- load tap changer
Pressure relief device
Stainless Diagrammatic name plate
Ground strap and bolt on Tank & LV
Surge Arrester
Primary Protective Link
Secondary breaker / with overload reset and signal light