firmware

For working with g-code :

Copy folder fro cd to your computer (to Desktop from example)

Try to execute "UniversalGcodeSender-all32.jar" from

"costycnc__3.08_grbl" folder

Or try https://chrome.google.com/webstore/detail/gcode-sender/ngncibnakmabjlfpadjagnbdjbhoelom?hl=en

If not can open try to install "jdk-8u45-windows-i586" or

Download and install java from official site :

https://www.java.com/en/download/

Try again to open "UniversalGcodeSender-all32.jar"

If appear "Not serial port found" insert cnc module to usb and

Try again !

If again appear "Not serial port found" try to install driver :

"Setup.exe" from "CH341SER" folder

Or from official site http://www.arduined.eu/tag/ch340g/

Try again!

Select port and click open!

Click "Settings ... Firware Settings... GRBL"

If appear "Not firware found!" :

CLOSE UNIVERSAL GCODE SENDER !!!!

and... open :

"GRBL_PD2_PC0.bat" from "firmware" folder

insert your com port and execute

And wait until firware finish to load without errors!

open again "UniversalGcodeSender-all32.jar" from

"costycnc__3.08_grbl" folder

Select port and click open!

Click "Settings ... Firware Settings... GRBL"

Will be appear this :

You can visualise this file !

And you can see here movement of machine when cut foam

Now you can click "Send button" and cnc begin cut!

You can return to working with costycnc.exe when you want!

The firmware is erase automatically!!

If you want working with gcode sender again you need firware again

with "GRBL_PD2_PC0.bat" from "firmware" folder

Any question is welcome!

You can write a email at bobyca2003@yahoo.com

Per ogni domanda telefonatemi a 3804676700 o scriveti un email a bobyca2003@yahoo.com .