Publications

Journal Publications

Published –

  1. Chou, J. Y., Chang, C. M., and Spencer, B. F., Jr. (2022). “Out-of-plane modal property extraction based on multi-level image pyramid reconstruction using stereophotogrammetry.” Mechanical Systems and Signal Processing, 169, 10878. (DOI)

  2. Chou, J. Y., Fu, Y., Huang, S. K., and Chang, C. M. (2022). “SHM data anomaly classification using machine learning strategies: A comparative study.” Smart Structures and Systems, 29(1), 77-91. (DOI)

  3. Hsu, S. H., Chang, T. W., and Chang, C. M. (2022). “Impacts of label quality on performance of steel fatigue crack recognition using deep learning-based image segmentation.” Smart Structures and Systems, 29(1), 207-220. (DOI)

  4. Chou, J. Y. and Chang, C. M. (2021). “Image motion extraction of structures using computer vision techniques: A comparative study.” Sensors, 21(18), 6248. (DOI)

  5. Hsu, T. W. and Chang, C. M. (2021). “Dynamic characteristics of geometrically nonlinear isolation systems for seismic protection of equipment.” Earthquake Engineering and Structural Dynamics, 50(10), 2795-2816. (DOI)

  6. Liu, J., Yu, A., Chang, C. M., and Ren, W. X. (2021). “A new physical parameter identification method for shear frame structures under limited inputs and outputs.” Advances in Structural Engineering, 24(4), 667-679. (DOI)

  7. Chang, C. M. and Chou, J. Y. (2020). “Modal tracking of seismically-excited buildings using stochastic system identification.” Smart Structures and Systems, 26(4), 419-433. (DOI)

  8. Chen, Y. Y., Qian, Z. C., Zhao, W., and Chang, C. M. (2020). “A magnetic bi-stable nonlinear energy sink for structural seismic control.” Journal of Sound and Vibration, 473, 155233. (DOI)

  9. Liu, J., Wang, S., Zheng, J., Chang, C. M., Wei, X., and Ren, W. (2020). “Time-frequency signal processing for integrity assessment and damage localization of concrete piles.” International Journal of Structural Stability and Dynamics, 20(02), 2050020. (DOI)

  10. Chang, C. M., Chang, C. W., and Lin, T. K. (2018). “Applications of neural network models for structural health monitoring based on derived modal properties.” Measurement, 129, 457-470. (DOI)

  11. Chou, J. Y. and Chang, C. M. (2018). “Decentralized damage detection of seismically-excited buildings using multiple banks of Kalman estimators.” Advanced Engineering Informatics, 38, 1-13. (DOI)

  12. Chang, C. M., Shia, S., and Lai, Y. A. (2018). “Seismic design of passive tuned mass damper parameters using active control algorithm.” Journal of Sound and Vibration, 426, 150-165. (DOI)

  13. Chang, C. M., Shia, S, and Yang, C. Y. (2018). “Use of active control algorithm for optimal design of base-isolated buildings against earthquakes.” Structural and Multidisciplinary Optimization, 58(2), 613-626. (DOI)

  14. Chang, C. M. and Chou, J. Y. (2018). “Damage detection of seismically-excited buildings based on prediction errors.” ASCE Journal of Aerospace Engineering, 31(4), 04018032. (DOI)

  15. Chang, C. M., Chou, J. Y., Tan, P., and Wang, L. (2017). “A sensor fault detection strategy for structural health monitoring systems.” Smart Structures and Systems, 20(1), 43-52. (DOI)

  16. Tan, P., Huang, J., Chang, C. M., and Zhang, Y. (2017). “Failure mode of isolated continuous girder bridge.” Engineering Failure Analysis, 80, 57-78. (DOI)

  17. Chang, C. M., Strano, S., and Terzo, M. (2016). “Modelling of hysteresis in vibration control systems by means of the Bouc-Wen model.” Shock and Vibration, Article ID 3424191, 14 Pages. (DOI: dx.doi.org/10.1155/2016/3424191)

  18. Terzo, M., Chang, C. M., Dimirovski, G. M., Lang, Z. Q., and Strano, S. (2016). “Vibration control of systems in presence of hard nonlinearities - Editorial.” Shock and Vibration, Article ID 1923574, 2 Pages. (DOI: dx.doi.org/10.1155/2016/1923574)

  19. Shi, P. Wu, B., Spencer, B. F., Jr., Phillips, B. M., and Chang, C. M. (2015). "Real-time hybrid testing with equivalent force control method incorporating Kalman filter." Structural Control and Health Monitoring, 23(4), 735-748. (DOI: 10.1002/stc.1808)

  20. Chang, C. M., Frankie, T. M., Spencer, B. F., Jr., and Kuchma, D. A. (2015). “Multiple degrees of freedom positioning correction for hybrid simulation.” Journal of Earthquake Engineering, 19, 277-296. (DOI: 10.1080/13632469.2014.962670)

  21. Tan, P., Fang, C., Chang, C. M., Spencer, B.F., Jr. (2015). "Dynamic characteristics of novel energy dissipation systems with damped outriggers." Engineering Structures, 98, 128-140. (DOI: 10.1016/j.engstruct.2015.04.033)

  22. Asai, T., Chang, C. M., and Spencer, B. F., Jr. (2015). "Real-time hybrid simulation of a smart base-isolated building." ASCE Journal of Engineering Mechanics, 141(3), 04014128. (DOI: 10.1061/(ASCE)EM.1943-7889.0000844)

  23. Fang, C., Tan, P., Chang, C. M., and Zhou, F. (2015). “A general solution for performance evaluation of a tall building with multiple damped and undamped outriggers.” The Structural Design of Tall and Special Buildings, 24(12), 797-820. (DOI: 10.1002/tal.1212)

  24. Chen, P. C., Chang, C. M., Spencer, B. F., Jr., and Tsai, K. C. (2015). “Adaptive model-based tracking control for real-time hybrid simulation.” Bulletin of Earthquake Engineering, 13(6), 1633-1653. (DOI: 10.1007/s10518-014-9681-2)

  25. Spencer, B. F., Jr., Chang, C. M., Frankie, T. M., Kuchma, D. A., Silva, P. F., and Abdelnaby, A. (2014). “A phased approach to enable hybrid simulation of complex structures.” Earthquake Engineering and Engineering Vibrations, 13(1), 63-77. (DOI: 10.1007/s11803-014-0240-2)

  26. Tan, P., Xu, K., Wang, B., Chang, C. M., Liu, H., and Zhou, F. L. (2014). “Development and performance evaluation of an innovative low-cost seismic isolator.” Science China Technological Sciences, 57(10), 2050-2061. (DOI: 10.1007/s11431-014-5662-6)

  27. Abdelnaby, A. E., Frankie, T. M., Elnashai, A. S., Spencer, B. F., Jr., Kuchma, D. A., Silva, P. F., and Chang, C. M. (2014). “Numerical and hybrid analysis of a curved bridge and methods of numerical model calibration.” Engineering Structures, 70, 234-245. (DOI: 10.1016/j.engstruct.2014.04.009)

  28. Chang, C. M., Spencer, B. F., Jr., and Shi, P. (2014). “Multi-axial active isolation for seismic protection of buildings.” Journal of Structural Control and Health Monitoring. 21(4), 484-502. (DOI: 10.1002/stc.1579)

  29. Asai, T., Chang, C. M., Philips, B. M., and Spencer, B. F., Jr. (2013). “Real-time hybrid simulation of a smart outrigger damping system.” Engineering Structures, 57, 177-188. (DOI: 10.1016/j.engstruct.2013.09.016)

  30. Chang, C. M. and Spencer, B. F., Jr. (2013). “Hybrid system identification for high-performance structural control.” Engineering Structures, 56, 443-456. (DOI: 10.1016/j.engstruct.2013.05.011)

  31. Chang, C. M., Wang, Z., Spencer, B. F., Jr., and Chen, Z. (2013). “Semi-active damped outriggers for seismic protection of high-rise buildings.” Smart Structures and Systems, 11(5), 435-451. (DOI: 10.12989/sss.2013.11.5.435)

  32. Asai, T., Spencer, B. F., Jr., Imerura, H., and Chang, C. M. (2012). "Nature of seismic control force in acceleration feedback." Journal of Structural Control and Health Monitoring, (20)5, 789-803. (DOI: 10.1002/stc.1496)

  33. Chang, C. M. and Spencer, B. F., Jr. (2010). “Active base isolation of buildings subjected to seismic excitations.” Earthquake Engineering and Structural Dynamics, 39(13), 1493-1512. (DOI:10.1002/eqe.1040)

  34. Chang, C. M., Park, K. S., Mullenix, A., and Spencer, B. F., Jr. (2008). “Semiactive control strategy for a phase II smart base isolated benchmark building.” Journal of Structural Control and Health Monitoring, 15(5), 673-696. (DOI: 10.1002/stc.269)

  35. Loh, C. H. and Chang, C. M. (2008). “Application of centralized and decentralized control to building structure: Analytical study.” ASCE Journal of Engineering Mechanics, 134(11), 970-982. (DOI:10.1061/(ASCE)0733-9399(2008)134:11(970))

  36. Loh, C. H., Lynch, J. P., Lu, K. C., Wang, Y., Chang, C. M., Lin, P. Y., and Yeh, T. H. (2007). “Experimental verification of wireless sensing and control system for structural control using MR-dampers.” Earthquake Engineering and Structural Dynamics, 36(10), 1303-1328. (DOI:10.1002/eqe.682)

  37. Loh, C. H. and Chang, C. M. (2007). “MATLAB-based seismic response control of a cable-stayed bridge: cable vibration.” Journal of Structural Control and Health Monitoring, 14(1), 109-143. (DOI:10.1002/stc.87)

  38. Chang, C. M. and Loh, C. H. (2006). “Seismic response control of cable-stayed bridge using different control strategies.” Journal of Earthquake Engineering, 10(4), 481-508. (DOI: 10.1142/S1363246906002839)

  39. Loh, C. H. and Chang, C. M. (2006). “Vibration control assessment of ASCE benchmark model of cable-stayed bridge.” Journal of Structural Control and Health Monitoring, 13(4), 825-848. (DOI:10.1002/stc.62)

Conference Publications

    1. Chang, C. M. and Hsu, T. W. (2020). “Performance evaluation and design of seismic isolation systems with geometric nonlinearity for important equipment.” 17th World Conference on Earthquake Engineering, Sendai, Japan.

    2. Huang, S. K., Lai, Y. A., Chang, C. M., Yang, C. Y., and Loh, C. H. (2020). “Experimental investigation of an active mass damper with acceleration feedback sliding mode control.” Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems.

    3. Chang, C. M. and Chou, J. Y. (2020). “Near real-time building damage detection based on a bank of Kalman estimators.” IMAC-XXXVIII, Texas, USA.

    4. Chang, C. M. and Chou, J. Y. (2019). “Damage detection of seismically excited building using banks of Kalman filters.” The 21st Japan-Taiwan-Korea Joint Seminar on Earthquake Engineering for Building Structures, Hsinchu, Taiwan.

    5. Yu, J. W., Chou, J. Y., and Chang, C. M. (2019). “Crack detection based on deep learning and computer vision algorithms.” The 32nd KKHTCNN Symposium on Civil Engineering, Daejeon, Korea.

    6. Wang, X. and Chang, C. M. (2019). “Development and experimental verification of dual-length nonlinear pendulum for seismic protection of buildings.” The 32nd KKHTCNN Symposium on Civil Engineering, Daejeon, Korea.

    7. Chou, J. Y. and Chang, C. M. (2019). “3D modal feature extraction based on video measurement.” The 32nd KKHTCNN Symposium on Civil Engineering, Daejeon, Korea.

    8. Chang, C. M. and Chou, J. Y. (2019). “Dynamic characterization of seismically-excited structures using frequency-domain stochastic subspace system identification.” Proceedings of 9th International Conference on Structural Health Monitoring of Intelligent Infrastructure, St. Louis, MI.

    9. Yang, C. Y., Su, C. K., Chang, C. M., and Hsu, C. C. (2019). “Effective use of lead rubber bearing for an isolated bridge in Taiwan through parametric study.” Bridge Engineering Institute Conference 2019, Honolulu, HI.

    10. Su, C. K., Chang, C. M., Yang, C. Y., and Hsu, C. C. (2019). “Investigation of pounding effect for a seismically isolated bridge based on a simplified model.” Bridge Engineering Institute Conference 2019, Honolulu, HI.

    11. Chang, C. M., Chiang, H. F., and Chou, J. Y. (2019). “Assessment of mode shapes based damage detection methods for building structures.” IX ECCOMAS Thematic Conference on Smart Structures and Materials, Paris, France.

    12. Yang, Y. Y., Chang, C. M., Kang, S. C., and Yeh, F. Y. (2019). “Study of construction-oriented structural connectors for a temporary bridge.” Proceedings of the 36th International Symposium on Automation and Robotics in Construction, Banff, Alberta, Canada.

    13. Chou, J. Y. and Chang, C. M. (2019). “Modal property extraction based on frequency domain stochastic subspace identification.” 13th International Conference on Damage Assessment of Structures, Porto, Portugal.

    14. Chou, J. Y. and Chang, C. M. (2019). “Use of bank of Kalman estimators for damage detection of buildings.” Proceedings of the SPIE, Denver, CO.

    15. Chou, J. Y., Chang, C. M., and Huang, S. K. (2018). "Automated Modal Property Extraction Based on Frequency-domain Stochastic Subspace System Identification." The 31st KKHTCNN Symposium on Civil Engineering, Kyoto, Japan.

    16. Chiang, H. F. and Chang, C. M. (2018). "Numerical Investigation of Mode Shape-Based Damage Detection Methods for Buildings." The 31st KKHTCNN Symposium on Civil Engineering, Kyoto, Japan.

    17. Ho, Y. C. and Chang, C. M. (2018). "Dynamic Behavior of Nonlinear Pendulum for Seismic Protection of Buildings." The 31st KKHTCNN Symposium on Civil Engineering, Kyoto, Japan.

    18. Hsu, T. W. and Chang, C. M. (2018). "Dynamic Characteristics of Geometrically Nonlinear Isolation Systems for Seismic Protection of Equipment." The 31st KKHTCNN Symposium on Civil Engineering, Kyoto, Japan.

    19. Hsieh, C. Y., Chou, J. Y., and Chang, C. M. (2018). "Crack Detection Based on Deep Learning and Computer Vision." The 31st KKHTCNN Symposium on Civil Engineering, Kyoto, Japan.

    20. Han, M. C. and Chang, C. M. (2018). "Investigation of Key Factors for Low Seismic Performance in Developing and Developed Countries." The 31st KKHTCNN Symposium on Civil Engineering, Kyoto, Japan.

    21. Chang, C. M. and Chiang, H. F. (2018). “Numerical investigation of mode shape-based damage detection methods for buildings.” The 7th Asia-Pacific Workshop on Structural Health Monitoring, Hong Kong, China.

    22. Yang, Y. Y., Chang, C. M., and Kang, S. C. (2018). “Framework of Automated Beam Assembly and Disassembly System for Temporary Bridge Structures.” The 35th International Symposium on Automation and Robotics in Construction, Berlin, Germany.

    23. Chen, P. Y., Zhuang, Z. Y., Chang, C. M., and Kang, S. C. (2018). “A numerical model for the attitude manipulation of twin-hoisted object.” The 35th International Symposium on Automation and Robotics in Construction, Berlin, Germany.

    24. Chang, C. M. and Hsu, A. L. (2018). “Design of optimal nonlinear tuned mass damper for buildings against earthquakes.” The 7th World Conference on Structural Control and Monitoring, Qingdao, China.

    25. Chang, C. M., Yang, C. C., and Chou, J. Y. (2018). “Evaluation of structural integrity using vibrational image measurements.” The 7th World Conference on Structural Control and Monitoring, Qingdao, China.

    26. Chang, C. M. and Huang, S. K. (2018). “Frequency-domain damage detection of seismically-excited buildings.” The 9th European Workshop on Structural Health Monitoring, Manchester, UK.

    27. Chang, C. M. and Yang, C. Y. (2018). “Seismic design of linear passive control systems using nonsmooth H∞ synthesis.” 11th U.S. National Conference on Earthquake Engineering, Los Angeles, CA.

    28. Huang, S. K., Liao, Y., Chang, C. M., Loh, C. H., Kiremidjian, A., and Rajagopal, R. (2017). “Use of time-frequency damage sensitive features for structural damage diagnosis.” The 11th International Workshop on Structural Health Monitoring, Stanford, CA.

    29. Chang, C. M., Shia, S., and Yang, C. Y. (2017). “Design of buildings with seismic isolation using linear quadratic algorithm.” The X International Conference on Structural Dynamics, Eurodyn 2017, Rome, Italy.

    30. Chang, C. M., Shia, S., and Yang, C. Y. (2017). “Design of linear passive control systems for buildings using dynamic output feedback control method.” The 3rd Huxian International Forum on Earthquake Engineering for Young Researchers, Champaign, IL.

    31. Chang, C. M. and Huang, S. K. (2017). “Operational modal analysis of structures using frequency-domain stochastic subspace system identification.” The 13th International Workshop on Advanced Smart Materials and Smart Structures Technology, Tokyo, Japan.

    32. Yang, Y. Y., Chen, P. Y., Kang, S. C., Chang, C. M., Chiang, Y. C., Kou, and T. Y. T. (2017). “Crane-Based autonomous erection and assembly system.” 3rd International Conference on Civil and Building Engineering Informatics & 2017 Conference on Computer Applications in Civil and Hydraulic Engineering, Taipei, Taiwan.

    33. Shia, S., Chang, C. M., Yang, C. Y. (2017). “Passive base isolation design of seismically-excited buildings using linear quadratic approach.” 3rd International Conference on Civil and Building Engineering Informatics & 2017 Conference on Computer Applications in Civil and Hydraulic Engineering, Taipei, Taiwan.

    34. Chang, C. M. and Huang, S. K. (2017). “Damage diagnosis of seismically-excited buildings using dual matrix projection of time-frequency distributions.” 3rd International Conference on Civil and Building Engineering Informatics & 2017 Conference on Computer Applications in Civil and Hydraulic Engineering, Taipei, Taiwan.

    35. Chou, J. Y. and Chang, C. M. (2017). “A sensor fault detection strategy for structural health monitoring systems.” 3rd International Conference on Civil and Building Engineering Informatics & 2017 Conference on Computer Applications in Civil and Hydraulic Engineering, Taipei, Taiwan.

    36. Chang, C. M. and Huang, S. K. (2017). “Stochastic subspace system identification using multivariate time-frequency distributions.” Proceedings of the SPIE, Portland, OR.

    37. Chang, C. M. and Huang, S. K. (2016). “Matrix factorization to time-frequency distribution for structural health monitoring.” Proceedings of the SPIE, Las Vegas, NV.

    38. Chang, C. M. and Loh, C. H. (2015). “An improved system identification approach to enable structural health monitoring.” 2015 Joint AESE/ANCRiSST Conference, Champaign, IL.

    39. Chang, C. M. and Loh, C. H. (2015). "Improved stochastic subspace system identification for structural health monitoring." The 11th International Conference on Damage Assessment of Structures, Belgium.

      1. Chen, P. C., Chang, C. M., Spencer, B. F., Jr., and Tsai, K. C. (2014). "Model-based tracking control framework for real-time hybrid simulation", The 12th International Conference on Motion and Vibration Control, Hokkaido, Japan.

    40. Chen, P. C., Chang, C. M., Spencer, B. F., Jr., and Tsai, K. C. (2013). “Improved model-based feedfoward and feedback control for real-time hybrid simulation.” 5th International Conference on Advances in Experimental Structural Engineering, Taipei, Taiwan.

    41. Chang, C. M., Frankie, T. M., Silva, P. F., Sanders, D. H., Kuchma, D. A., and Spencer, B. F., Jr. (2013). “Hybrid simulation of a seismically-excited four-span curved bridge.” 5th International Conference on Advances in Experimental Structural Engineering, Taipei, Taiwan.

    42. Spencer, B. F., Jr., Kuchma, D. A., Elnashai, A. S., and Chang, C. M. (2013). “Advances and Innovations at the Multi-axial Full-scale Substructure Testing and Simulation (MUST-SIM) Facility.” 5th International Conference on Advances in Experimental Structural Engineering, Taipei, Taiwan.

    43. Frankie, T., Abdelnaby, A., Silva, P., Sanders, D., Elnashai, A., Spencer, B., Kuchma, D., and Chang, C. M. (2013) Hybrid Simulation of Curved Four-Span Bridge: Comparison of Numerical and Hybrid Experimental/Analytical Results and Methods of Numerical Model Calibration. Structures Congress 2013: pp. 721-732

    44. Chang, C. M., Frankie, T. M., Silva, P. F., Sanders, D. H., Kuchma, D. A., and Spencer, B. F. Jr. (2013). “Hybrid testing of a four-span curved bridge.” 10th CUEE Conference, Tokyo, Japan.

    45. Chang, C. M., Bletzinger, M. E., and Spencer, B. F., Jr. (2012). “High-precision displacement control for hybrid simulation.” International Conference on Earthquake Engineering Research Challenges in the 21st Century, Harbin, China.

    46. Chang, C. M. and Spencer, B. F., Jr. (2012). “Multi-axial active isolation for buildings against earthquakes.” 9th CUEE and 4th ACEE Joint Conference, Tokyo, Japan. (Best Presentation Award)

    47. Wu, B., Shi, P., Spencer, B. F., Jr., Philips, B. M., and Chang, C. M. (2011). "Real-time hybrid testing with equivalent force control method incorporating Kalman filter." The Workshop of the Asian-Pacific Network of Centers for Research in Smart Structures Technology (ANCRiSST-2011), Harbin, China.

    48. Shi, P., Wu, B., Philips, B., Chang, C. M., and Spencer, B. F., Jr. (2011). "Time delay compensation with equivalent force control method incorporating Kalman filter." 4th International Conference on Advances in Experimental Structural Engineering, Ispra, Italy.

    49. Chang, C. M. and Spencer, B. F., Jr. (2010). “An experimental study of active base isolation control for seismic protection.” Proceedings of the SPIE, San Diego, CA.

    50. Wang, Z., Chang, C. M., Spencer, B. F., Jr., and Chen, Z. (2010). “Controllable outrigger damping system for high rise building with MR dampers.” Proceedings of the SPIE, San Diego, CA.

    51. Chang, C. M., Wang, Z., and Spencer, B. F., Jr. (2009). “Application of active base isolation control.” Proceedings of the SPIE, San Diego, CA.

    52. Zhang, Y., Caicedo, J. M., Sim, S. H., Chang, C. M., Spencer, B. F., Jr., and Guo, X. (2008). “Modal identification of Bill Emerson bridge.” 14th World Conference on Earthquake Engineering, Beijing, China.

    53. DeVore, C., Chang, C. M., and Spencer, B. F., Jr. (2007). “Active base isolation of building structures in two dimensions.” Proceedings of the 2007 Earthquake Engineering Symposium for Young Researchers, Seattle, WA.

    54. Loh, C. H. and Chang, C. M. (2006). “Decentralized versus centralized control study for large civil infrastructural systems.” 4th World Conference on Structural Control and Monitoring, San Diego, CA.

    55. Loh, C. H., Lynch, J. P., Chang, C. M., Lu, K. C., and Lin, P. Y. (2006). “Application of wireless active sensing units to control a structure using MR-dampers.” 17th International Conference on Adaptive Structure and Technologies, Taipei, Taiwan.

    56. Chang, C. M., Liao, W. I., and Loh, C. H. (2006). “Identification of frame structure embedded with shape memory alloy.” 19th KKCNN Symposium on Civil Engineering, Japan.

    57. Loh, C. H. and Chang, C. M. (2005). “Assessment of semi-active control strategies for MR dampers: Application to ASCE benchmark model of cable-stayed bridge.” 5th International Conference on Structural Stability and Dynamics, Kissimmee, FL.

    58. Loh, C. H. and Chang, C. M. (2005). “Vibration control of cable-stayed bridge using MR-dampers: MATLAB-based approach.” International Conference on Safety and Reliability of Engineering Systems and Structures, Rome, Italy.

    59. Chang, C. M. and Loh, C. H. (2005). “MATLAB-based seismic response control of cable-stayed bridge: Considering cable vibration.” 4th KU-KAIST-NTU Student Seminar on Civil Engineering Research, Korea.

    60. Chang, C. M., Yeh, T. H., and Loh, C. H. (2005). “Comparison on control effectiveness between centralized and decentralized control of high-rise building.” 18th KKCNN Symposium on Civil Engineering, Taiwan.

    61. Loh, C. H. and Chang, C. M. (2004). “Assessment of semi-active control strategies for MR-damper: Application to building structure.” 7th International Conference on Motion and Vibration Control, St. Louis, MO.

    62. Chang, C. M. and Loh, C. H. (2004). “Assessment of semi-active control strategies for MR dampers: application to building structure.” 3rd KU-KAIST-NTU Student Seminar on Civil Engineering Research, Japan.

Technical Report

  1. Chang, C. M. and Spencer, B.F., Jr. (2011). “Multi-axial active isolation for seismic protection of buildings.” Newmark Structural Engineering Laboratory (NSEL) Report Series, University of Illinois at Urbana-Champaign, Urbana, IL, http://hdl.handle.net/2142/30839