Understand The Importance of Modern Brake Controllers for Your Trailer

Brake controllers are an integral part for stopping the trailer effectively. It is your responsibility to ensure that you can safely stop the vehicle attached with a trailer. It is not only essential for you but also for the others on the road. This safety and efficiency can be easily achieved by the installation by the electric brake controller. They are quite an essential addition more than you think. Due to the electrical controller, one can prevent certain drastic accidents.

The usage of electric brake controllers for the towing has increased to a great extent due to its multiple advantages. As the towing need to be done for the heavyweight, using electrical brake controllers will be a suitable option. Some people consider that the brake controller is not required. However, according to the national law, a vehicle needs to get the brake controller if any trailer weighs over the 750 kg.

An electric brake controller is divided into two main categories:

Proportional: This braking system uses the motion-sensing technology that judges the speed on which the towing vehicle is slowing down. Hence, it slows the towed vehicle at a proportional speed. The main theory on which this brake controller works is that they sense the braking speed of the tow vehicle and matches automatically.

This braking system uses high-quality sensors which adjust the braking force and delay with the right accuracy. As sensors are activated by the speed and force of the braking, it can automatically adjust with the conditions which impact the speed of the vehicle.

Time-Delayed: This brake controller is performed by the pre-set amount of power. It stops the vehicle with the power which is already programmed. This amount is preset by the driver which largely depends upon the fact how much weight are they towed. The driver determines the settings of how the brake adjust when the vehicle’s brakes are applied.

Both the categories of brake controller are highly safe and cost-effective. You can also call the specialists to install this controller who will also check the current flows between the controller and the brake. If you need this setting, feel free to connect with the leading dealers in the city.

Source