Anka Datta, Shubhajit Das, Ravi Kumar Dwivedi, Avinash Kumar, "Surface Coating and Tribological Investigation of Conventional Cutting Tool Material", Materialstoday (Elsevier), (2023, accepted), ISSN 2214-7853.

Aparna Parihar, Avinash Kumar, Udwesh Panda, Rukhsar Khan, Dipesh Singh Parihar and Raju Khan “Cryopreservation: A Comprehensive Overview, Challenges, and Future Perspectives”, Advanced Biology (2023), 2200285, https://doi.org/10.1002/adbi.202200285.

Avinash Kumar, Anuj Kumar Sharma, and Jitendra Kumar Katiyar, "State-of-the-Art in Sustainable Machining of Different Materials Using Nano Minimum Quality Lubrication (NMQL)", Lubricants (2023), 11,2, 64, https://doi.org/10.3390/lubricants11020064.

Yathavan Subramanian, J. Gajendiran, R. Veena, Abul Kalam Azad, V. C. Bharath Sabarish, S. A. Muhammed Ali, Avinash Kumar & Ramesh Kumar Gubendiran, “Structural, Photoabsorption and Photocatalytic Characteristics of BiFeO3-WO3 Nanocomposites: An Attempt to Validate the Experimental Data Through SVM-Based Artificial Intelligence (AI)”, J. Electron. Mater. (2023), https://doi.org/10.1007/s11664-022-10188-7.

Avinash Kumar, Arpana Parihar, Udwesh Panda, and Dipesh Singh Parihar, “Microfluidics-Based Point-of-Care Testing (POCT) Devices in Dealing with Waves of COVID-19 Pandemic: The Emerging Solution”, ACS Appl. Bio Mater (2022), https://doi.org/10.1021/acsabm.1c01320.

Avinash Kumar, Anuj Kumar Shrama, TVK Gupta and Jitendra Kumar Katiyar, “Influence of hexagonal boron nitride additive nanocutting fluid on the machining of AA6061-T6 alloy using minimum quality lubrication”, Proc IMechE Part E: J Process Mechanical Engineering (2022), https://doi.org/10.1177/09544089221110980.

A. Parihar, V. Pandita, A. Kumar, et al., “3D Printing: Advancement in Biogenerative Engineering to Combat Shortage of Organs and Bioapplicable Materials”, Regen. Eng. Transl. Med. (2021). https://doi.org/10.1007/s40883-021-00219-w.

Yathavan Subramanian , Veena R , Muhammed Ali S.A., Avinash Kumar, et al., "Artificial Intelligence Technique Based Performance Estimation of Solid Oxide Fuel Cells", Materialstoday (Elsevier), (2021), ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2021.06.412.

Manjinder Singh, Avinash Kumar and Abdul Rahman Khan, “Capillary as a liquid diode”, Phys. Rev. Fluids (2020), 5(10), 102101. https://doi.org/10.1103/PhysRevFluids.5.102101. 

Vinod Parmar, Avinash Kumar, G. Vijaya Prakash, Subhra Datta, Dinesh Kalyanasundaram, "Investigation, modelling and validation of material separation mechanism during fiber laser machining of medical grade titanium alloy Ti6Al4V and stainless steel SS316L", Mechanics of Materials (2019), 137, 103125. http://doi.org/10.1016/j.mechmat.2019.103125.

Vinod Parmar, Avinash Kumar, Manimuthu Mani Sankar, Subhra Datta, G. Vijaya Prakash, Sujata Mohanty and Dinesh Kalyanasundaram, "Oxidation facilitated antimicrobial ability of laser micro-textured titanium alloy against gram-positive Staphylococcus aureus for biomedical applications”, Journal of Laser Applications (2018), 30, 032001. http://doi.org/10.2351/1.5039860.

Avinash Kumar, Subhra Datta and Dinesh Kalyanasundaram, “Liquid slippage in confined flows: Effect of periodic micropatterns of arbitrary pitch and amplitude”, Journal of Heat transfer (2017), 140(1):012403-012403-7. http://doi.org/10.1115/1.4037363

Avinash Kumar, Subhra Datta and Dinesh Kalyanasundaram, “Permeability and effective slip in confined flows transverse to wall slippage patterns”, Physics of Fluids (2016), 28(8):082002. http://doi.org/10.1063/1.4959184

Rajiv Kumar Singh, Avinash  Kumar, Rishi Kant, Ankur Gupta, E Suresh, Shantanu Bhattacharya, "Design and fabrication of 3-dimensional helical structure of polydimethylsiloxane for flow control application", Microsystems Technology (2014), 20 (1), 101-111. http://doi.org/10.1007/s00542-013-1738-7. 

Avinash Kumar, Ankur Gupta, Rishi Kant, Syed Nadeem Akhtar, Nachiketa Tiwari, Janakrajan Ramkumar, Shantanu Bhattacharya, “Optimization of LASER Machining process for the preparation of photo masks and its application to Micro-systems fabrication", Journal of Micro/Nanolithography, MEMS, and MOEMS (JM3) (2013), 12 (4), 041203-041203. http://doi.org/10.1117/1.JMM.12.4.041203.

Anka Datta, Shubhajit Das, Ravi Kumar Dwivedi, Avinash Kumar, "Surface Coating and Tribological Investigation of Conventional Cutting Tool Material", IC4M 2023.

Avinash Kumar, Omnish Kumar, “Health Monitoring System using Wrist Pulse Detection”, North-East Research Conclave 2022 (IIT Guwahati).

Avinash Kumar, Anka Datta, “Current Energy Challenges in India and Proposed Novel Low Cost, Flexible, Thin and Transparent Solar Cell Solutions”, North-East Research Conclave 2022 (IIT Guwahati).

Yathavan Subramanian , Veena R , Muhammed Ali S.A., Avinash Kumar*, et al., "Artificial Intelligence Technique Based Performance Estimation of Solid Oxide Fuel Cells", International Conference on Nanoelectronics, Nanophotonics, Nanomaterials, Nanobioscience & Nanotechnology, Mangalam college of Engineering, Kottayam, Kerala (29-30 April, 2021).

Anitha Dhanasekaran, Veena R , Yathavan Subramanian, Avinash Kumar, "Deformation Analysis for BFO Thin Films with Different Thickness by Finite Element Method", ASEAN International Conference on Energy and Environment, Universiti Brunei Darussalam, Brunei, (15-16 September, 2021)

Avinash Kumar, Subhra Datta, and Dinesh Kalyanasundaram, " Design, optimization and stability of textures of contacting surfaces in micro-flows", ASTFE 5th International Conference on Thermal and Fluids Engineering Conference (TFEC2020), New Orleans, LA, USA (April 5-8, 2020).

Avinash Kumar, Subhra Datta, and Dinesh Kalyanasundaram, "Reduction of hydraulic friction in confined flows by laser texturing: Experiments and theoretical validation", ASME 2018 15th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2018), Dubrovnik, Croatia (June 10-13, 2018).

Avinash Kumar, Subhra Datta and Dinesh Kalyanasundaram, "Confinement effects on effective slip of patterned surfaces", ASME Fluids Engineering Division Summer Meeting (FEDSM2017), Hawaii, USA (30 July - 3 Aug 2017).

Avinash Kumar, Subhra Datta and Dinesh Kalyanasundaram, "Liquid slippage in con fined flows: effect of periodic micropatterns of arbitrary pitch and amplitude", proceedings of ASME 2016 5th Micro/Nanoscale Heat and Mass Transfer International Conference (MNHMT2016), Biopolis, Singapore (Jan 3-6, 2016). 

Shanthanu Chakravarthy, Avinash Kumar, Ramu G and Ananthasuresh G.K, "Haptic Display for an Endoscopic Simulator Using an Integrated Ring-actuator", Proceedings of 1st International & 16th National Conference on Machines and Mechanisms (iNaCoMM 2013), IIT Roorkee (December 18 to December 20, 2013). 

Avinash Kumar, Rishi Kant, Ankur Gupta, Shantanu Bhattacharya, "Fabrication and parameter optimization of co2 laser machined photo mask for photolithography process", Proceedings of the International Conference on Innovations in Design and Manufacturing, Jabalpur, India, (Dec 5-7, 2012) (IIITDM Jabalpur-2012, InnDeM-5015).

Abhishek Kumar, Avinash Kumar, Ashwani Kumar (Editors), Book title: “Applications of Biotribology in Biomedical Systems” (Springer Nature Publishing, Switzerland AG) (In Press). 

Avinash Kumar, Ashwani Kumar, Abhishek Kumar (Editors), Book title: “Laser Based Green Technologies for Sustainable Manufacturing” (CRC Press, Taylor & Francis Publishing, USA) (2023) (ISBN: 9781032392738, https://doi.org/10.1201/9781003402398 ).

Ashwani Kumar, Yatika Gori, Avinash Kumar, Chandan Swaroop Meena, Nitesh Dutt (Editors), Book title: “Advanced Materials for Biomedical Application”, (CRC Press, Taylor & Francis Publishing, USA) (2022) (ISBN: 9781003344810, https://doi.org/10.1201/9781003344810).

Avinash Kumar, Udwesh Panda, Microfluidics based devices and their role on point-of-care testing, Biosensor Based Advanced Cancer Diagnostics (2020), (ISBN: 599105, Elsevier Publication, Amsterdam, The Netherlands). https://doi.org/10.1016/B978-0-12-823424-2.00011-9. 

Avinash Kumar, Udwesh Panda, Vinay Kumar Patel, Rishi Kant, Laser-Assisted Fabrication of Polymer by Pushing Down the Limit of Resolution, Trends in Fabrication of Polymers and Polymer Composites (2021), (AIP Publishing, USA). https://doi.org/10.1063/9780735423916_003. 

Sanjeev Kumar, Rajesh Kumar Verma, Avinash Kumar, Vinay Kumar Patel, Importance of Chemical Treatments of Natural Fibers in Fabrication of High-Performance Natural Fiber Reinforced Polymer Composites, Trends in Fabrication of Polymers and Polymer Composites (2021), (AIP Publishing, USA). https://doi.org/10.1063/9780735423916_010. 

Avinash Kumar, S. Nisar Basha, Arpana Parihar, Udwesh Panda, Clinically Available/Under Trial Drugs and Vaccines for Treatment of SARS-COV-2, Computational approaches for novel therapeutic and diagnostic designing to mitigate SARS-CoV2 infection (2021), (Elsevier Publication, Amsterdam, The Netherlands). http://doi.org/10.1016/B978-0-323-91172-6.00005-4. 

Anka Datta, Avinash Kumar, Ashwani Kumar, Abhishek Kumar, Varun Pratap Singh, Advanced Material in Biological Implants and Surgical Tools, Advanced Materials for Biomedical Applications (2022), (CRC Press, Taylor & Francis, USA). http://doi.org/10.1201/9781003344810-2.

Avinash Kumar, Anka Datta, Ashwani Kumar, Abhishek Kumar, Recent advancements and future trends in next-generation materials for biomedical applications, Advanced Materials for Biomedical Applications (2022), (CRC Press, Taylor & Francis, USA). http://doi.org/10.1201/9781003344810-1. 

Ashwani Kumar, Arun Kumar Singh Gangwar, Avinash Kumar, Chandan Swaroop Meena, Varun Meena, Varun Pratap Singh, Nitesh Dutt, Arbind Prasad and Yatika Gori, Biomedical study offemur bone fracture andhealing, Advanced Materials for Biomedical Applications (2022), (CRC Press, Taylor & Francis, USA). http://doi.org/10.1201/9781003344810-14. 

Francis Luther King M, Ashwani Kumar, Avinash Kumar, Abhishek Kumar, Introduction to Optics and Laser-Based Manufacturing Technologies, Laser-based Technologies for Sustainable Manufacturing (2023), (CRC Press, Taylor & Francis, USA). http://doi.org/10.1201/9781003402398-1.

Abhishek Kumar, Aayush Pathak, Avinash Kumar, Ashwani Kumar, Physics of Laser–Matter Interaction in Laser-Based Manufacturing, Laser-based Technologies for Sustainable Manufacturing (2023), (CRC Press, Taylor & Francis, USA). http://doi.org/10.1201/9781003402398-2. 

Prameet Vats, Kishor Kumar Gajrani, Avinash Kumar, Laser-Based Additive Manufacturing, Laser-based Technologies for Sustainable Manufacturing (2023), (CRC Press, Taylor & Francis, USA). http://doi.org/10.1201/9781003402398-4. 

Aayush Pathak, Abhishek Kumar, Avinash Kumar, Ashwani Kumar, Francis Luther King M, Application of Laser Technology in the Mechanical and Machine Manufacturing Industry, Laser-based Technologies for Sustainable Manufacturing (2023), (CRC Press, Taylor & Francis, USA). http://doi.org/10.1201/9781003402398-6. 

Avinash Kumar, Mohit Byadwal, Abhishek Kumar, Ashwani Kumar, Francis Luther King M, Laser Micromachining in Biomedical Industry, Laser-based Technologies for Sustainable Manufacturing (2023), (CRC Press, Taylor & Francis, USA). http://doi.org/10.1201/9781003402398-8.