Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P., "Effects of Exit Fan Angle on the Heat Transfer Performance of Sweeping Jet Impingement," AIAA Journal, 2021; 59(6):2113-2125. doi:10.2514/1.J059931
Hossain, M.A., Ameri, A., Bons, J.P., Conjugate Heat Transfer Study of Innovative Pin-Fin Cooling Configurations.," AIAA Journal of Propulsion and Power, 2021; 37(4):604-614. doi:10.2514/1.B37980
Tomac, M.N., Hossain, M.A., Ameri, A., Bons, J.P., Flow and Frequency Characterization of the Synchronized Stacked Sweeping Jets.," AIAA Journal, 2021; 59(1):118-130. doi:10.2514/1.J059643
Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P., "Experimental Investigation of Innovative Cooling Schemes on an Additively Manufactured Engine Scale Turbine Nozzle Guide Vane," ASME. J. Turbomach. 2021;143(5):051004 -14. doi:10.1115/1.4049618
Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P., "Sweeping jet film cooling at high blowing ratio on a turbine vane," ASME. J. Turbomach. 2020;142(12):121010 -11. doi:10.1115/1.4047396
Hossain, M.A., Asar, M.E., Gregory, J., Bons, J.P., "Experimental Investigation of Sweeping jet film cooling in a transonic turbine cascade," ASME. J. Turbomach. 2019;142(4):041009 -11. doi:10.1115/1.4046548
Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P., "Sweeping jet film cooling on a turbine vane," ASME. J. Turbomach. 2019;141(3):031007-031007-11. doi:10.1115/1.4042070
Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P., 2018 "Sweeping jet impingement cooling on a simulated turbine vane leading edge," Journal of Global power and propulsion Society. 2:402-414, doi.org/10.22261/JGPPS.5A7OAZ
Hossain, M.A., Prenter, R., Lundgreen, R., Ameri, A., Gregory, J., Bons, J.P., 2017, " Experimental and numerical investigation of sweeping jet film cooling," ASME. J. of Turbomachinery, 140(3), p. 031009, doi: 10.1115/1.4038690
Hossain, M.A., Love, N.D., Choudhuri, A., 2017 “Design of A High Turbulence Intensity Combustion System”, Journal of Mechanical Engineering Science, JMES-17-1014, DOI: 10.1177/0954406218757565
Roberts C, Mahmoud A, Bons J, Hossain A, Elsheikh A, Vinciguerra R, Vinciguerra P, Ambrósio R., “Introduction of Two Novel Stiffness Parameters and Interpretation of Air Puff–Induced Biomechanical Deformation Parameters With a Dynamic Scheimpflug Analyzer,” J Refract Surg. 2017; 33: 266-273. doi: 10.3928/1081597X-20161221-03
M. A. Hossain, Ziaul Huque, and Raghava R. Kammalapati, Propagation of Shock on NREL Phase VI Wind Turbine Airfoil under Compressible Flow, Journal of Renewable Energy, vol. 2013, Article ID 653103, 2013. doi:10.1155/2013/653103
M. A. Hossain, Ziaul Huque, Raghava R. Kammalapati, Ghizlane Zemmouri, Discrete Optimization of Wind Turbine Blade Airfoil, Int. J. of Eng. Research and Tech, Vol 2(2), 2013, ISSN: 2278-0181
M. A. Hossain, Md. Taibur Rahman, Shakerur Ridwan, Numerical Investigation of Fluid Flow of a 2D Backward Facing Step Channel, Int. J. of Eng. Research and Tech, Vol 2(10), 2013, ISSN: 2278-0181
Shubarna Khan, Ziaul Huque, M. A. Hossain, Raghava R. Kammalapati, Wind Turbine Blade Tip Comparison as A function of Taper Using Computational Fluid Dynamics, Adv. and App. in Fluid Mech, Vol 14(2), 2013, ISSN: 0973-4686
In Progress
Effect of Roughness on the Performance of Fluidic Oscillator. (AIAA Journal)
Large Eddy Simulation of a Sweeping Jet in a Crossflow. (AIAA Journal)
Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P., "Experimental Investigation of Innovative Cooling Schemes on an Additively Manufactured Engine Scale Turbine Nozzle Guide Vane," ASME Turbo Expo 2020, Virtual. Paper number: GT2020-15707
Hossain, M.A., Asar, M.E., Ameri, A., Bons, J.P., Conjugate Heat Transfer Study of Innovative Pin-Fin Cooling Configurations.," AIAA Scitech 2020 Forum, AIAA2020-0634
Hossain, M.A., Asar, M.E., Gregory, J., Bons, J.P., "Experimental Investigation of Sweeping jet film cooling in a transonic turbine cascade," ASME Turbo Expo 2019, Pheonix, AZ. Paper number: 2019-91678
Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P., "Sweeping jet film cooling at high blowing ratio on a turbine vane," ASME Turbo Expo 2019, Pheonix, AZ. Paper number: GT2019-91696
Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P., "Effects of Rotation on a Fluidic Actuator", AIAA Scitech 2019 Forum, AIAA SciTech Forum, AIAA 2019-0885, DOI: 10.2514/6.2019-0885
Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P., " Effects of Exit Fan Angle on the Heat Transfer Performance of Sweeping Jet Impingement," 2018 International Energy Conversion Engineering Conference, AIAA Propulsion and Energy Forum, Cincinnati, Ohio. AIAA 2018-4886, DOI: 10.2514/6.2018-4886
Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P., "Sweeping jet film cooling on a turbine vane," ASME Turbo Expo 2018, GT2018-77099, doi:10.1115/GT2018-77099
Agricola, L.M., Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P., " Turbine Vane Leading Edge Impingement Cooling with a Sweeping Jet.," ASME Turbo Expo 2018, GT2018-77073, doi:10.1115/GT2018-77073
Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P., "Sweeping jet impingement cooling on a simulated turbine vane leading edge," 2018, Global power and propulsion conference, Montreal, Canada. Paper number: GPPS2018-0148, DOI: 10.5281/zenodo.1342688
Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P., "Effects of Curvature on the Performance of Sweeping Jet Impingement Heat Transfer," 55th AIAA Aerospace Sciences Meeting, 2018, Florida. DOI: 10.2514/6.2018-0243
Agricola, L.M., Hossain, M.A., Prenter, R., Lundgreen, R.K., Ameri, A., Gregory, J., Bons, J.P., " Impinging Sweeping Jet Heat Transfer," 53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017, Paper number: AIAA 2017-4974, DOI:10.2514/6.2017-4974.
Hossain, M.A., Prenter, R., Lundgreen, R., Ameri, A., Gregory, J., Bons, J.P., " Experimental and Numerical Investigation of Sweeping Jet Film Cooling," ASME Turbo Expo 2017, GT2017-64479. doi:10.1115/GT2017-64479
Prenter, R., Hossain, M.A., Agricola, L.M., Ameri, A., Bons, J.P., " Experimental Characterization of Reverse-Oriented Film Cooling," ASME Turbo Expo 2017, GT2017-64731. doi:10.1115/GT2017-64731
Hossain, M.A., Prenter, R., Lundgreen, R.K., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P., " Effect of roughness on the performance of Fluidic oscillator," 55th AIAA Aerospace Sciences Meeting, 2017, Texas. Paper number: AIAA 2017-0770. DOI: 10.2514/6.2017-0770
Hossain, M.A., Prenter, R., Lundgreen, R.K., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P., " Investigation of crossflow interaction of an oscillating jet," 55th AIAA Aerospace Sciences Meeting, 2017, Texas. Paper number: AIAA 2017-1690. DOI: 10.2514/6.2017-1690
Lundgreen, R.K., Hossain, M.A., Prenter, R., Bons, J.P., Gregory, J., Ameri, A., " Impingement heat transfer characteristics of sweeping jet," 55th AIAA Aerospace Sciences Meeting, 2017, Texas. Paper number: AIAA 2017-1535. DOI: 10.2514/6.2017-1535
Sacco, C., Hossain, M.A., Bons, J.P., “The effect of freestream turbulence on Steady VGJ Flow Control on a Highly Loaded Transonic LPT Cascade,” AIAA Aviation 2016, Washington, DC, USA. Paper number: AIAA-2016-4089. DOI:10.2514/6.2016-4089
Roberts CJ, Mahmoud AM, Bons J, Hossain A, Elsheikh A, Vinciguerra R, Vinciguerra P, Ambrósio R., 2016, “A New Stiffness Parameter in Air Puff Induced Corneal Deformation Analysis”. Invest Ophth Vis Sci. 2016; 57: ARVO (Association for Research in Vision and Ophthalmology) E-Abstract 2390.
Ghosh, A.K., Modak, P., Hossain M.A., Ahmed, S.R., "Displacement potential solution of stresses and displacements in a semicircular curved beam with local supports", ASME 2015 Applied Mechanics and Materials Conference, At Seattle, Washington, USA, June 2015.
Arturo Acosta, M. A. Hossain, Marco Quiroz, Ahsan Choudhuri, Design of A High Turbulence Intensity Combustion System ,50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibition, Cleveland, Ohio. doi: 10.2514/6.2014-3874
M A. Hossain, Ziaul Huque, Raghava R. Kammalapati , 'Numeric Investigation of Fluid-Solid Interaction on Wind Turbine Blade, Proc. ASME 56383; Volume 9: Mechanics of Solids, Structures and Fluid, V009T10A004, November 15, 2013, Paper number: IMECE 2013-65647, doi:10.1115/IMECE2013-65647
Hossain, S., Hossain, M.A., “Numerical Investigation of Perfectly Premixed Combustion and the Effect of NOx Emission for Syngas in a Gas Turbine Combustor,” ASME 2015 Power conference, San Diego, California, USA. Paper number: POWER2015-49388, doi:10.1115/POWER2015-49388
M. A. Hossain, MD. Taibur Rahaman, Mohammad Ikthair Hossain Soiket, Sarzina Hossain, 'Investigation and Improvement of Thermal Efficiency of Hypersonic Scramjet, 'Proceeding of ASME 2014 International Mechanical Congress and Exposition IMECE 2014, Paper number: IMECE 2014-37385, doi:10.1115/IMECE2014-37385
M. A. Hossain, Sarzina Hossain, 'Numerical Investigation of an Axi-Symmetric Turbulent Jet' Proceeding of ASME 2014 International Mechanical Congress and Exposition IMECE 2014, Paper number: IMECE 2014-37382. doi:10.1115/IMECE2014-37382
M. A. Hossain, Sarzina Hossain, 'Numerical Investigation of Porous Medium Heat Transfer, 'Proceeding of ASME 2014 International Mechanical Congress and Exposition IMECE 2014, Paper number: IMECE 2014-37387. doi:10.1115/IMECE2014-37387
M. A. Hossain, Sarzina Hossain, Mohammad Ikthair Hossain Soiket, 'Numerical Investigation of Vortex Shedding in A Square Cylinder Using RANS and LES Model, 'Proceeding of ASME 2014 International Mechanical Congress and Exposition IMECE 2014, Paper number: IMECE 2014-37393. doi:10.1115/IMECE2014-37393
M. A. Hossain, Sarzina Hossain, Shakerur Ridwan, 'Numeric Investigation of Fluid Solid Interaction and performance analysis of pre-bent Wind Turbine Blade, 'Proceeding of ASME 2014 International Mechanical Congress and Exposition IMECE 2014, Paper number: IMECE 2014-37394.doi:10.1115/IMECE2014-37396
Arturo Acosta, M. A. Hossain, Marco Quiroz, Ahsan Choudhuri, Design of A High Intensity Turbulent Combustion System ,4th Southwast Energy Science and Engineering Symposium (SESES), March 22nd, 2014 TX, USA
M. A. Hossain, Monimul Huq, Numerical Investigation of flow over a Lid Driven Square Cavity, International Conference on Mechanical, Industrial and Energy Engineering 2014, ICMIEE-PI-140123, Khulna, Bangladesh.
Hossain, M.A., Asar, E., Ameri, A., Gregory, J., Bons, J.P., Revolutionizing Turbine Cooling with Micro-Architectures Enabled by Direct Metal Laser Sintering (DMLS), DOE UTSR workshop 2018, Daytona Beach, Florida.
M.A. Hossain, Ziaul Huque, Raghava R. Kammalapati, Design of Wind Turbine Blade Using New Optimized Aerodynamic Simulator, AWEA Wind Power Conference and Exhibition, May 2013.
M. A. Hossain, Ziaul Huque, Raghava R. Kammalapati, Design of Wind Turbine Blade Airfoil by Optimized Aerodynamic Simulator, 10th Annual Student Symposium, Texas A&M at Galveston, October 2012.
Arturo Acosta, M. A. Hossain, Marco Quiroz, Design of A High Intensity Turbulent Combustion System ,Graduate Research Expo 2013, University of Texas at El-paso.
Hossain, M.A., " Sweeping jet film cooling and Impingement cooling," October 1, 2019, DOW Chemical, Lake Jackson, TX, USA.
Hossain, M.A., " Sweeping jet film cooling and Impingement cooling for heat transfer application," March 14, 2019, Boeing R&D, St. Louis, MO, USA.
Hossain, M.A., “Sweeping jet film cooling and impingement cooling for gas turbine heat transfer application,” April 2019, Ohio Supercomputer Center, Columbus, OH, USA
Hossain, M.A., “Sweeping jet film cooling for gas turbine application,” March 2019, Aerospace Research Center, Columbus, OH, USA