Husbandry
Temperature & Humidity
Here i will explain how to achieve perfect temps and perfect humidity by setting up your enclosure the right way and arranging vents and lights.
First things First
i wish to start off here by saying, you cant achieve the correct husbandry unless you have the correct enclosure. . .
Glass enclosures are horrible. Glass does not hold in heat, it is a great conductor so it sucks the heat right out and puts it back into the room. Screen tops on a glass enclosure lets all the humidity out threw the top along with the heat. You cant keep any heat inside of a glass enclosure unless you custom make a plexi top and zip tie lamps to the underside and thats risky because plexi-glass flexes due to heat and humidity.
if using a glass enclosure you should put styro-foam insulation around the sides. and use foil on top of the screen to help hold in humidity and heat. This isnt the best idea its best to build a proper enclosure made out of melamine which holds in heat and humidity effortlessly.
Enclosures jerry rigged just cant do what a GOOD enclosure can do. i already showed you, that you can build a NICE enclosure for about 100$ so why not make it the correct way? our frilled dragons health depends on it. jerry rigged enclosures are just no good. for example. using unsealed plywood, covering it in outdoor carpet, stapling hardware cloth(metal mesh screen) and placing plexi glass on the front just wont cut it. unsealed plywood will not only not hold humidity well but will actually suck humidity out of the air, the outdoor carpet covering the wood will hold bacteria, fecal matter, parasites and other issues. hardware cloth or chicken wire on top allows to much ventilation, so you cant bring up the heat or humidity inside the enclosure. it just doesn't work!!!
i have seen some enclosures that have a 40 or 55 gallon tank with a wooden frame on top with screen, basically making a screen extension on top of the glass tank and placing lamps on top. this just wont work. the enclosure will be room temp at best, and only where the lamps are will it be warm. as i explained in the health section, that can lead to damage to the frill. it just isnt in the best interest of your reptile to go out and buy a few things just to "get by". for about the same amount of money you can buy the wood you need, lowes will cut it for you, all you have to do is drill some holes and screw them together.
for a 4x8 foot sheet of melamine you'll pay 36$(plywood is only 2-3$ less expensive but you pay more to buy a sealant paint), most lowes has a cutting area where they will cut it down for you. or you could buy the same amount of plywood for less, but then you'll have to purchase a sealant to seal the plywood so it is waterproof, then you have to let it air out. melamine is just the better choice since its already coated in plastic, thus it wont absorb water, and will hold in heat great because it is dense wood. once you have the basic box built, you can then think about vent placement and light placement to achieve optimum heat and humidity.
Lighting
Introduction
in this section i will explain where to actually mount the lights with in your enclosure. For instructions on how to wire and how to mount the lights please click here.
the basic rule for positioning lights would be, bring light into the whole enclosure, bring temps up in a nice gradient. this means to make sure all areas of the enclosure are bright and full of light, and that the placement of the lights will ensure that there will be a cool area(78-80), a warm area(85-90) and a hot area(95-105) not including the basking zone.
when i mention the hot area i am not talking about the actual basking zone. when i mention hot area i am talking about the whole area around the basking zone, and when i mention basking spot i am referring to the small area that may reach up to 120-130 degrees directly under the basking lamp, this area may just be a small 3x3 inch square. the hot area would be the whole area around that. i will be adding photos to further demonstrate the difference and elaborate more on this.
Lighting is very important. if you do not have enough light inside the enclosure your reptile may be more prone to hiding. they may rather stay in the dark corner of the enclosure and sulk. if there is a dark corner in the enclosure that may also mean that the corner is alot more cool then the rest of the enclosure, they will get sick because they are to cool. you dont want any area of your enclosure below a min 78 degrees during the day.
DONT USE red lamps for the basking spot, red lamps do not emit any uva light that reptiles need to be happy and healthy. uva is normal "full spectrum" lighting, every bulb has uva except for the colored bulbs like the red and "black" night lights. reptiles need bright light to keep them happy, period. you can not rely souly on your UVB lamp to illuminate the whole enclosure, no matter how small it is. the use of halogen and incandescent bulbs will solve this issue. the bulbs do not have to be specialty reptile bulbs for basking and bringing light into the enclosure. they can be inexpensive bulbs purchased form home depot or lowes. you still need a source of uvb from a specialty reptile uvb bulb.
Placement.
i often use outdoor flood lamp fixtures. you can angle them and rotate them as much as you wish. they also have 2 lamp holders, though you can buy some with only 1. visit Lighting for pictures and explanations. in my 3x3x1.5 enclosure, i have a flood lamp on top holding 2 bulbs, 75w and a cfl 13 watt. i have an 18 inch uvb 10.0 bulb across the top as well, and a single flood lamp fixture on the side wall about 12 inches up from the bottom, a 50w halogen. i have heat on the top, and heat to one side. the whole enclosure is 82-90 degrees with a hot area of 100-107. basking spot of 127. placing lamps on the top as well as near the bottom will bring heat to the bottom thus bringing up your entire heat gradient to warmer temps.
more to come...
Types of lightbulbs i use:
i will elaborate soon but heres what i use
-50w par 20 hallogen bulbs (use multiple bulbs in row to create even smooth gradient)
-75w par 30-45 hallogen bulbs (hotter bulb for more narrow spot of heat)
-13 watt compact fluorescent energy saver (to add light but not heat)
-26 watt compact fluorescent energy saver (to add more light but not heat)
-100 watt mercury vapor bulb by zoomed (to add UVB)
-15 watt 18 inch uvb 10 bulbs by zoomed or exoterra (not zilla!!!)
this image deminstrates proper temp gradient , ambient temp, and basking zone and basking spot
sorry the image is a bit crude. this was created quickly,
Ventilation
screen top enclosures dont hold humidity like we want them to, its no secret. you can mist all you want but for our hot temp tropical reptiles we need MORE! more doesnt always mean expensive, as i have shown you on the Enclosure page. so you have set up your lights so that you have enough heat in your enclosure. now that you have the heat in your enclosure and your able to maintain humidity more easily, but only if you limit ventilation. this is a delicate balance between to much, and to little. i have found that, in shorter enclosures, you need more ventilation. but taller and bigger enclosures dont necessarily need more ventilation. For example: my 4x4 enclosure has 3 vents. my 3x3 enclosure has 2 vents. my 4x2 enclosure needs 3-4 vents. shorter enclosures have less vertical temp gradient. the air moves up only about 24 inches up where as the larger enclosures the air moves around much more inside.
limiting vents will hold in the correct amount of humidity, with out letting it escape with heat, right out into your room. you do however want the correct amount of air exchange or else you'll hold in bad smells and your enclosure wont dry out enough and you'll start seeing mold and mildew. if your enclosure is warm enough you wont have much issue with this especially with the correct placement and amount of vents.
i have found that, when using flood lamps on the top of the enclosure (mounted inside the enclosure) it is ideal to drill your vent hole directly over the hottest lamp. this lamp is with in 6-8 inches of the ceiling. though melamine isnt pron to burning or melting, it is ideal to let the excess heat vent just above the lamp. i have gone over this in more detail on the Lighting page under Mounding.
i will be elaborating on all of this in time, i will also be taking pictures and video explaining more in detail