Facility

Name: Ytterbium pulsed fiber laser 

Model #: CARBIDE-CB3-40W

Manufacturer: Light Conversion

Specification: Power: 

• Power: 40W / Wavelength: 1030 nm

• Power: 20W / Wavelength: 515 nm

• Power: 10W / Wavelength: 343 nm 

Pulse duration: <250 fs, 

Repetition rate: ~ 1MHz

Bi Burst Mode

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Ytterbium pulsed fiber laser 

Model #: YLPN-2-20x500-300

Manufacturer: IPG Photonics

Specification: Power: 300 W, Wavelength: 1064 nm, Pulse duration: 20-500 ns, Repetition rate: 2-4000 kHz

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Ytterbium pulsed fiber laser 

Model #: YLPM-1-4x200-20-20 

Manufacturer: IPG Photonics 

Specification: Power: 20 W, Wavelength: 1064 nm,  Pulse duration: 4, 8, 14, 20, 30, 50, 100, 200 ns

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: CO2 laser

Model #: SCX60 

Manufacturer: Rofin

Specification: Power: 600 W, Wavelength: 10.4 ~ 11.2 μm

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Galvanometer scanner

Model #: SG8220

Manufacturer: SINO-GALVO

Specification: Working temperature : 0~45 ℃, Linearity: 99.9%, Input voltage: ± 24V DC, Maximum scan angle: ±15°, Resolution: 12 μrad   

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB 

Name: Angle grinder 

Model #: GWS 6-100 

Manufacturer: Bosch 

Specification: Power consumption: 670 W,

Rotational speed: 11,000 rpm, Disc diameter: 100 mm, Wire cup brush diameter 70/75 mm

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: High Speed Cutter 

Model #: D28720 

Manufacturer: Dewalt 

Specification: Power consumption: 2200 W, Rotational speed: 3800 rpm, Disc diameter: 355 mm

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Air Compressor 

Model #: KAC - 25 

Manufacturer: Keyang

Specification: Output : 2.5 HP, Tank capacity: 25 L, Motor specification : 1750 rpm, The amount of air discharge: 120 L/min

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Vacuum Pump 

Model #: 2546C - 10 

Manufacturer: Welch 

Specification: Output: 190 W, Tank capacity: 45 L, Maximum vacuum: 27.6, The amount of air discharge: 45 l/min

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Stand Mixer 

Model #: 5K5SS 

Manufacturer: KitchenAid 

Specification: Output: 325 W, Speed: 2800 ~ 12100 rpm, Capacity: 4.8 L

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Fume Extractor 

Model #: PA - 300TS - IQ 

Manufacturer: Pure Air

Specification: Power: 200 W, Air pressure: 2500 Pa, Diameter of the entrance: 50 mm / 75 mm, Filter efficiency: 0.3 um ≥ 99.997%

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Rassel LOC-251F

Model #: LOC-251F

Manufacturer: Rassel 

Specification: Size: 910⨯750⨯895 mm, Weight: 65 kg, Temperature range: -50 ℃ ± 2 ℃

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Daeyang ETS OV-08F

Model #: ETS OV-08F

Manufacturer: Daeyang 

Specification: Temperature range: ±1.5 °C at 100 °C, Drying time: 100 °C within 15 min., Volume: 88 L

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name:Pulsed UV laser 

Model #: Pulse 355-3A 

Manufacturer: INNGU LASER 

Specification: Power consumption: , Power: 3 W (peak power: 4 W), Wavelength: 355 nm (third-harmonic generation), Repetition rate: 30-80 kHz, Pulse width: 12-22 ns

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:CW pulse laser 

Model #: RFL-C2000 

Manufacturer: Precitec 

Specification:Max. Power: 0.1 - 2 kW, Max. speed: 100 mm/s, Wavelength: 1080 nm, Focal length: Manual focus

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:Laser head

Model #: YW30 

Manufacturer: Precitec 

Specification:Wavelength range: 900 nm to 1090 nm, Laser power: max. 6 kW, Operating temperature: 5 ~ 55, Focusing lens: 100, 125, 150, 200, 250, 300 mm

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name: Industrial Water Chiller 

Model #: CWFL-2000BNS 

Manufacturer: S&A

Specification: Voltage : AC 1P 220 V, Refrigerant : R-410a, Tank Capacity : 13 L, Max. pump lift : 53 m

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:Chiller 

Model #: RC009 

Manufacturer: LYTRON 

Specification: Temperature Range: 10 °C ~ 35 °C (with 1050 WATTS), Refrigerant: R134A, Pump type: 1.8 gpm

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name: Anyty Autofocus Microscope 

Model #: 3R-MSBTVTY 

Manufacturer: Anyty

Specification: Magnification: 10 ~ 250X (40, 100, 180, 250),  Focal length: 45, 13, 3, 0 mm, Pixels: 2304⨯1536, Resolution: 0.6184 um

Place: Rm#703-1, Eng. Bldg. #1, ADLAM LAB

Name: MicroscopDino-Lite e 

Model #: AM2111 

Manufacturer: Dino-Lite 

Specification: Magnification: 10 ~ 230X, Focal length: Manual focus, Pixels:  640⨯480, Resolutions: 30 FPS

Place: Rm#703-1, Eng. Bldg. #1, ADLAM LAB

Name: Dino-Lite Microscope 

Model #: AM4013MZT 

Manufacturer: Dino-Lite 

Specification: Magnification: 370 ~ 480X, Focal length: Manual focus, Pixels: 1280⨯1024, Resolutions: 30 FPS

Place: Rm#703-1, Eng. Bldg. #1, ADLAM LAB

Name: Dino-Lite Microscope 

Model #: AM4515T8 

Manufacturer: Dino-Lite 

Specification: Magnification: 700 ~ 900X, Focal length: Manual focus, Pixels: 1280⨯1024, Resolutions: 30 FPS

Place: Rm#703-1, Eng. Bldg. #1, ADLAM LAB

Name: Dial gauge application meter 

Model #: 99MAH051M 

Manufacturer: Mitutoyo

Specification: Measure thickness: 0 ~ 13 mm, Least count: 0.001 mm

Place: Rm#703-1, Eng. Bldg. #1, ADLAM LAB

Name: Microelectronic Scale - For Ultra Precision 

Model #: HS2130F 

Manufacturer: Hansung

Specification: Maximum capacity: 210 g, Readability: 0.001 g, Weighing pan diameter: 80 mm

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: COHERENT FieldMax II-TO

Model #: FieldMax II-TO

Manufacturer: COHERENT

Specification: Measurement Range (full scale, sensor-dependent): 3 nW to 300 kW, Temperature: < 90% (5 to 40° C) (operating), < 95% (0 to 70° C) (storage), Relative Humidity: < 90% (5 to 40° C) (operating), < 95% (0 to 70° C) (storage), Altitude: 4,500 m (operating), < 12,000 m (storage)

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name: Leica DVM6 A

Model #: DVM6 A

Manufacturer: Leica

Specification: Resolution: 3664⨯2748 pixels, Pixel size: 1.67×1.67 Pixel, Frame Ratio: (Max) 37 frames per second, Motorized XY Stage, Motorized Focus Drive

Place: Rm#302, Eng. Bldg. #4, ADLAM LAB

Name:Optical Microscope 

Model #: BH2-UMA 

Manufacturer: OLYMPUS 

Specification: Magnification:2.5X, 5X, 10X, 20X, Focal length: Manual focus

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:Optical Microscope 

Model #:AM4515 Series 

Manufacturer: Dino-Lite 

Specification: Magnification: 700 ~ 900X, Focal length: Manual focus, Pixels: 1280⨯1024, Resolutions: 30 FPS

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:Thermocouple Digital Thermometer

Model #: HHC210

Manufacturer: OMEGA

Specification: Wide Measurement Range: -200 ~ 1372 °C; Resolving power: 0.1 °C -200 ~ 1372 °C, 1 °C -200 ~ -100 °C; Operating temperature: 0 ~50 °C

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:Pyrometer 

Model #: OS758-LS 

Manufacturer: OMEGA 

Specification: Wide Measurement Range: Infrared up to 1600 °C (2912 °F), Narrow FOV, Distance to Spot Ratio of 60:1, Resolution: 0.1 °C/0.1 °F at -83.2 to 999.9 (°C/°F), otherwise 1 °C/1 °F

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:Digital Stirring Hot Plates 

Model #: PC-420D

Manufacturer: CORNING

Specification: Temp. Range: 5  - 550, Top Plate Size: 12.7 x 17.8 cm, Dimensions: 10.8 x 19.7 x 28 cm

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:Si Amplified Fixed Gain Detector 

Model #: PDA10A2 

Manufacturer: Thorlabs

Specification: Active area: Ø1 mm, Operating temperature: 10 to 50 °C, Wavelength Range: 200 to 1100 nm, Peak Wavelength: 730 nm

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:Digital Multimeter 

Model #: 17B+

Manufacturer: Fluke

Specification: Capacitance : 1000 μF, AC, DC to 10 A, Maximum voltage between the terminal and the ground, : 1000 V

Place: Rm#204, Eng. Bldg. #4, ALTP LAB

Name:Transformer 

Model #: SV-1022

Manufacturer: Daekwang 

Specification: Rated output voltage range : 0V ~ 240 V, Efficiency : 95%, Rated capacity : 1 KVA, Rated current 4.2 A

Place: Rm#204, Eng. Bldg. #4, ALTP LAB