Dissemination

  1. M. Kahlin et al., Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing, Scientific paper, International Journal of Fatigue, January 2020.
  2. S. Suresh et al., Topology optimization using a continuous-time high-cycle fatigue model, Scientific paper, Structural and Multidisciplinary Optimization, November 2019.
  3. S. Stekovic et al., The AddMan Project: Innovative Re-Design and Validation of Complex Airframe Structural Components Formed by Additive Manufacturing for Weight and Cost Reduction, Poster, Aerospace Technology Congress 2019, SUSTAINABLE AEROSPACE INNOVATION IN A GLOBALISED WORLD, October 2019.
  4. M. Kahlin et al., Improved fatigue properties of additive manufactured Ti6Al4V for aerospace by various surface post processes, Conference presentation, EUROMAT 2019, September 2019.
  5. A. Wiberg et al., Design for additive manufacturing using a master model approach, Conferenc paper, Proceedings of the ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 2019.
  6. C-J. Thore, Penalty regulation of overhang in topology optimization for additive manufacturing, Scientific paper, Structural and Multidisciplinary Optimization, Springer Berlin Heidelberg, July 2019.
  7. S. Suresh et.al, TOPOLOGY OPTIMIZATION USING AN EVOLUTION-BASED ANISOTROPIC HIGH-CYCLE FATIGUE CONSTRAINT, Talk, Swedish Mechanics Days 2019, June 2019.
  8. S. Suresh et al., A topology optimization method for as-built metal additive manufacturing, Talk, Swedish Mechanics Days 2019, June 2019.
  9. N. Axelsson and M. Brantemo, Topology Optimization as Tool for Development of an Additive Manufactured Aircraft Component, Master thesis, June 2019.
  10. S. Suresh et al., Topology optimization using an evolution-base anisotropic high-cycle fatigue constraint, Conference presentation, 13th World Congress of Structural and Multidisciplinary Optimization, May 2019.
  11. S. Stekovic and S. Leech, Innovative Re-Design and Validation of Complex Airframe Structural Components Formed by Additive Manufacturing for Weight and Cost Reduction, Poster, ITD Airframe Annual Review, May 2019.
  12. S. Suresh et al., A topology optimisation method for as-build metal additive manufacturing, Conference presentation, 13th World Congress of Structural and Multidisciplinary Optimization, May 2019.
  13. A. Wiberg et al., Design for Additive Manufacturing – A review of available design methods and software, Scientific Paper, Rapid Prototyping Journal, Vol. 25 No. 6, pp. 1080-1094, April 2019.
  14. S. Stekovic, Panel discussion: Clean Sky 2 Experience, Event called Clean Sky Public-Private Partnership – European aeronautics research at its best: What next in Horizon Europe?, April 2019.
  15. S. Suresh, Topology optimization involving AM specific properties, Talk, CAM2-RA2 Workshop on Additive Manufacturing, March 2019.
  16. C-J. Thore, Topology optimization under material uncertainty, Talk, CAM2-RA2 Workshop on Additive Manufacturing, March 2019.
  17. M. Kahlin et al., Improved fatigue properties of additive manufactured Ti6Al4V for aerospace by various tool-less surface post processes, Talk, CAM2-RA2 Workshop on Additive Manufacturing, March 2019.
  18. A. Wiberg, Using Knowledge Based Engineering when designing, Talk, CAM2-RA2 Workshop on Additive Manufacturing, March 2019.
  19. N. Cruchley, Additive Manufacturing in Aerospace – Fatigue Life Improvement and Novel Design Tools , Talk, Clean Sky 2 Workshop on Additive Manufacturing in Aviation, January 2019.
  20. H. A. Grundström, Trinitas Topology Optimization Tutorial Document, Report, October 2018.
  21. S. Suresh et al., An Evolution- Based High-Cycle Fatigue Constraint in Topology Optimization, Conference presentation,
  22. Proceedings of the 6th International Conference on Engineering Optimization, September 2018.
  23. D. Gillbert et al, Adaptive Abrasive Finishing of AM Components through In-Process Monitoringand Tool-Path Corrections, Conference presentation, 2018 ASPE and euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing, July 2018.
  24. A. Wiberg et al., AN OPTIMIZATION FRAMEWORK FOR ADDITIVE MANUFACTURING GIVEN TOPOLOGY OPTIMIZATION RESULTS, Conference presentation, The Tools and Methods of Competitive Engineering (TMCE) 2018 Symposia, May 2018.
  25. H. A. Grundström, Developments in Topology Optimization in the AddMan Project, Report, LiU, March 2018
  26. H. A. Grundström, Topology Optimization for Additive Manufacturing Considering Stress and Anisotropy, Master thesis, LiU, October 2017