Building the "lamp".

Дата на публикуване: Sep 22, 2010 6:38:50 PM

For heat sink for the LEDs I used the old radiator from the heating/cooling system.The PCBs for the white LEDs are made by me, with a hole in the middle, so the led back can contact using thermal grease to the radiator.

This is how it's look like when I finished with all wirings.The heat sink is long 50cm and 10 wide.

This is the effect of the light at night with only white LEDs.

The temperature of the LEDs isn't more than +10C above ambient...Cool :).

All LEDs connected to the slave controller.On the picture only the warm leds are set to 2% duty cycle, everything else is 0.

This is the test setup.It's a mess but soon I will put everything where it shoot be :).