Herunder kan du læse hvad de enkelte bånd fra satellitterne især kan bruges til. Teksten er et uddrag fra: https://gisgeography.com/spectral-signature/

1 Coastal Aerosol (0.43-0.45µm)

As the name implies, your coastal aerosol band is particularly useful in coastal, bathymetric and aerosol studies. The coastal band reflects blues and violets and is becoming more common on satellite sensors such as Landsat-8 and WorldView-3. Here are some of its spectral band applications:

WHALE POPULATION: Because of its ability to penetrate water (up to 20-30m in clear water), the coastal band is being used to estimate (sub-surface) whale populations This spectral band allows more confidence to the identification of whales in the wild as opposed to observations of animals in captive tanks. (Counting whale populations from space)

BATHYMETRY: Because the coastal aerosol band is absorbed less by water, it allows for coastal water and ocean color observation. This is also useful for spectral signatures for marine vegetation like seagrass and other underwater benthic habitat.

AEROSOLS: Because the coastal aerosol band is more sensitive to clouds, smoke and haze, it’s being used for filtering out clouds in imagery processing. Earth observers are fine-tuning cloudless orthoimagery as basemaps with the help of the coastal aerosol band. (Cloud detection and removal techniques in Landsat 8 imagery)

2 Blue (0.45-0.51µm)

Snorkel in an oasis of marine vegetation with the deep water imaging of the blue band. Your eyes can see reflected blue light. Depending on the clarity of water, visible light like the blue band can reach depths up to 20-30 meters. Tweak your spectral signature using the blue band for deep water imaging.

DEEP WATER IMAGING: Because of its finer level of spectral penetration in coastal areas, underwater reefs, water turbidity and sediment, submerged aquatic vegetation, turbidity and bathymetric mapping makes for some unique remote sensing applications.

SMOKE PLUMES, ATMOSPHERIC HAZE AND CLOUDS: The visible range blue is shorter wavelengths like blue (0.45-0.51µm), which are most sensitive to atmospheric haze. This makes the blue band ideal for detecting smoke plumes because shorter wavelengths more easily scattered by smaller particles.

CLOUDS, SNOW AND ROCK: Separating clouds from snow and rock because the spectral signature to haze and thin clouds is highly sensitive to both blue and red wavelengths. (Cloud and Snow Discrimination)

3 Green (0.53-0.59µm)

To many, green signifies nature – plants, trees and forest. It’s the same in remote sensing. The green portion covers reflectance peak from leaf surfaces (hence the color green that we see). This also means the spectral reflectance is low in the blue and red regions of the spectrum because of the absorption by chlorophyll during photosynthesis.

PLANT VIGOR AND VEGETATION: Green is used to discriminate broad vegetation classes and discriminating plant material. A spectral signature of reflectance peak from leaf surfaces is highlighted in the green band.

ALGAL AND CYANOBACTERIAL BLOOMS: Clear water generally reflects little in any part of the spectrum. However, reflectance is maximum at the blue end of the spectrum – hence the color blue our eyes see. But when algal blooms are present, green is where the maximum reflectance generally occurs.

URBAN RECREATION: The grassy and forested greens in urban areas are indicated of recreational areas like parks, golf courses and cemeteries.

4 Red (0.64-0.67µm)

Tropical soils, the built environment and geological features generally have red contribute to its spectral signature. Red is used in formulas like the Normalized Difference Vegetation Index (NDVI) because how much plants absorb red (and blue) light.

SOIL TYPES AND GEOLOGIC FEATURES: The reflectance of bare soil generally depends on its composition. The soils in Australia almost mimics Mars because of its redness. Soils rich in iron-oxide with its rust color has a high reflectance in the red spectral band – great for this type of soil spectral signature. (Predicting soil properties)

BUILT AND NATURAL ENVIRONMENT: The red band has been used for discriminating between man-made objects and vegetation. A spectral signature for cultural features such as roads and human settlements are best detected in the red band.

CHLOROPHYLL ABSORPTION: One-half of the variables used in NDVI – healthy vegetation reflects more near-infrared (NIR) and green light compared to other wavelengths. It absorbs more red and blue light and is used to quantify vegetation in NDVI.

5 Yellow (0.585-0.625µm)

The “yellow” band is relatively new and can be found as early as Worldview-2. This band collects a bit finer detail from the 0.585-0.625 µm portion of the spectrum. Simply, it collects the “yellowness” of a particular object.

INSECT DISEASE IN TREE CROWNS: One study developed a yellowness index (YI) as a measure for chlorosis of leaves in stressed plants and manganese-deficient soybean leaves. (Estimating stressed vegetation with the Yellowness Index)

FEATURE CLASSIFICATION: The yellow band can be useful in different seasons to delineate invasive grass and other general features. It’s also been used to classify individual tree species and crop types by season.

6 Red-Edge (0.705-0.745µm)

The red-edge band is between the near infrared and red band. For chlorophyll, the red portion strongly absorbs light while the near infrared generates a strong reflection. In the transition between these two spectral bands is the red-edge band.

PLANT HEALTH AND AGE STATUS: With a high reflectivity of plant health and vitality, the vegetation response from the red-edge is often greatest for both the chlorophyll content and the leaf structure – such as leaf area index (LAI). (Identifying plant stress using red-edge)

CROP MONITORING: Applying the red-edge band to precision farming and even discriminating between healthy and crops impacted by disease. It’s been used to distinguish between crop types and nutrition.

7 Near Infrared 1 – NIR-1 (0.76-0.90µm)

Near-infrared reflectance is one of the most powerful ways to classify healthy vegetation. Separating classes like water and vegetation is always easier in the near-infrared region. This is because in the near infrared spectrum, healthy plants reflect it, while near infrared radiation is absorbed more by water.

BIOMASS CONTENT: The internal structure of healthy chlorophyll uncannily reflects near-infrared radiation. But when plants wilt and eventually die, the near-infrared response lessens until nothing is left.

ARCHAEOLOGICAL SITES: Unearthing ancient archaeological sites by interpreting denser mud bricks, crop marks and subtle differences in vegetation, soil, and geology from near-infrared radiation. (Near-infrared aerial crop mark archaeology)

NORMALIZED DIFFERENCE VEGETATION INDEX (NDVI): Near-infrared is used in spectral signatures for measuring plant health. This can be done using the NDVI ratio, consisting of near-infrared and red bands. NDVI extracts vegetation differences more precisely than if we only looked at visible greenness.

8 Near Infrared 2 – NIR-2 (0.86-1.04µm)

There is significant overlap between the near-infrared 2 and near-infrared-1 bands. The main difference being is how much less affected the near-infrared-2 band is affected by atmospheric influence.

VEGETATION STUDIES: Near infrared-2 delivers more sophisticated vegetation analysis and biomass studies primarily because it’s less impacted by the atmosphere. (Reflectance of visible and near-infrared radiation from vegetation)

LAND/WATER BOUNDARIES: Water is a strong absorber of near infrared light, while vegetation is a strong reflector. You can delineate forest fragmentation and quantitatively the loss and gain of forests around the world with near-infrared.

9 Short-wave Infrared 1 – SWIR-1 (1.57-1.65µm)

Short-wave infrared (SWIR) can help discriminate between dry and wet soils. It’s also used in the spectral signature for geology and soils classification. SWIR is also known for its ability to penetrate thin clouds, and even smoke and haze better than visible bands.

MOISTURE CONTENT: SWIR-1 is sensitive to moisture content in soil and vegetation. Reflectance decreases as water content increases. This makes it useful for distinguishing wet earth from dry earth.

CLOUD/SMOKE PENETRATION SWIR sees through smoke to the terrain underneath. This helps direct response crews and fight forest fires more effectively.

MINERAL EXPLORATION – Studies have shown obtaining spectral signatures for indicator minerals like carbonates, ammonium, and sulphates and ferric iron or hemitite in rocks to be easier with SWIR. (Mapping rocks and minerals with ASTER SWIR band)

10 Short-wave Infrared 2 – SWIR-2 (2.08-2.35µm)

Short-wave infrared-2 has its similarities to SWIR-1. SWIR-2 is primarily used for imaging soil types, geological features and minerals such as copper and sulfates. It’s also sensitive to vegetation and soil moisture variations. Snow and ice feature and clouds appear darker toned.

WATER PROPERTIES: Water has much stronger absorption using SWIR. This helps spectral signature responses for monitoring blue-green algae bloom and turbid waters.

IRRIGATION PRACTICES: The reflectance of short-wave infrared is affected by the leaf water content, making it ideal to understand crop water stress and targeting irrigation. (Estimating crop water stress and drought with SWIR)

MINERAL MAPPING: SWIR covers a range where clay types of minerals deliver a greater spectral signature. Hydrous minerals appear darker to discriminate between different types of kaolinite and smecite.

11 Panchromatic (0.50-0.68µm)

Just like black and white film, panchromatic bands collect all visible reflected light at once into a single channel. Because it sees more light at once, the spatial resolution is sharpest in contrast to collecting the red, blue and green channels separately. For example, Landsat-8’s panchromatic band is 15-meter grid cells. The other spectral bands are 30-meter resolution with the exception of the thermal band. The only draw-back with the pan-band is that you won’t be able to differentiate colors.

PANSHARPENING: Sharpen your images with pansharpening by combining color information with the panchromatic band. Because panchromatic bands sacrifices spectral resolution for spatial resolution, it delivers sharper image definition with pansharpening.

12 Cirrus (1.36 -1.38µm)

The cirrus band earned its name because it’s a specialist of cirrus cloud detection. The atmosphere absorbs almost all of the cirrus band, as the ground is barely visible. High-altitude clouds are detected and picked out which are not visible in other bands.

CIRRUS CLOUDS: Cirrus clouds reflect brightly while most land surfaces will appear dark. Improved detection of the pesky cirrus cloud helps with removal and enhancements in imagery basemaps.

13 Thermal Infrared – TIRS-1 (10.60–12.51µm)

The thermal infrared band sees heat. Landsat’s thermal infrared uses emitted instead of reflected radiation. It has a coarser resolution of 100 meters but is still useful in understanding surface temperature, night studies and even volcano monitoring.

VOLCANO ACTIVITY: Despite its coarser spatial resolution, thermal infrared has been used to estimate lava discharge rates from volcanoes. Night-time thermal infrared images give energy flux estimations for volcano hazard identification. (Volcano activity using thermal infrared in New Zealand)

URBAN HEAT: TIRS gives insight on where to surface temperature heat within a city. Parks, open water and natural vegetation are generally coolest while industrial neighborhoods are warmest. It’s often the case that a city or metropolitan area is significantly warmer than its surrounding rural areas due to human activities. (Urban heat islands and land surface temperature)

WEATHER PREDICTION: NOAA Geostationary Operational Environmental Satellite (GOES) collects thermal infrared to understand cloud heights and types – and even ocean surface features.