Embedded Files
On the massive network known as the Internet, computing devices send all kinds of messages to other computing devices. A message might be a tiny ping to check if another device is online or a message could be an entire webpage.
But there's a limit to how large a message can be, since there's a limit to how much data can be reasonably transmitted at once by the physical network connections between devices.
That's why many networking protocols split each message into multiple small packets. The Internet Protocol (IP) describes the structure of the packets that whizz around the Internet.
Each IP packet contains both a header (20 or 24 bytes long) and data (variable length). The header includes the IP addresses of the source and destination, plus other fields that help to route the packet. The data is the actual content, such as a string of letters or part of a webpage.
What is an IP packet?
What is an IP packet?
IP (Internet Protocol) is a network layer protocol that has to do with routing. It is used to make sure packets arrive at the correct destination.
Packets are sometimes defined by the protocol they are using. A packet with an IP header can be referred to as an "IP packet."
An IP header contains important information about where a packet is from (its source IP address), where it is going (destination IP address), how large the packet is, and how long network routers should continue to forward the packet before dropping it. It may also indicate whether or not the packet can be fragmented, and include information about reassembling fragmented packets.
In networking, a packet is a small segment of a larger message. Data sent over computer networks*, such as the Internet, is divided into packets. These packets are then recombined by the computer or device that receives them.
Suppose Alice is writing a letter to Bob, but Bob's mail slot is only wide enough to accept envelopes the size of a small index card. Instead of writing her letter on normal paper and then trying to stuff it through the mail slot, Alice divides her letter into much shorter sections, each a few words long, and writes these sections out on index cards. She delivers the group of cards to Bob, who puts them in order to read the whole message.
This is similar to how packets work on the Internet. Suppose a user needs to load an image. The image file does not go from a web server to the user's computer in one piece. Instead, it is broken down into packets of data, sent over the wires, cables, and radio waves of the Internet, and then reassembled by the user's computer into the original photo.
*A network is a group of two or more connected computers. The Internet is a network of networks — multiple networks around the world that are all interconnected with each other.
Why use packets?
Why use packets?
Theoretically, it could be possible to send files and data over the Internet without chopping them down into small packets of information. One computer could send data to another computer in the form of a long unbroken line of bits (small units of information, communicated as pulses of electricity that computers can interpret).
However, such an approach quickly becomes impractical when more than two computers are involved. While the long line of bits passed over the wires between the two computers, no third computer could use those same wires to send information — it would have to wait its turn.
In contrast to this approach, the Internet is a "packet switching" network. Packet switching refers to the ability of networking equipment to process packets independently from each other. It also means that packets can take different network paths to the same destination, so long as they all arrive at the destination. (In certain protocols, packets do need to arrive at their final destinations in the correct order, even if each packet took a different route to get there.)
Because of packet switching, packets from multiple computers can travel over the same wires in basically any order. This enables multiple connections to take place over the same networking equipment at the same time. As a result, billions of devices can exchange data on the Internet at the same time, instead of just a handful.
What is a packet header?
What is a packet header?
A packet header is a "label" of sorts, which provides information about the packet’s contents, origin, and destination.
When Alice sends her series of index cards to Bob, the words on those cards alone will not give Bob enough context to read the letter correctly. Alice needs to indicate the order that the index cards go in so that Bob does not read them out of order. She also should indicate that each one is from her, in case Bob receives messages from other people while she is delivering hers. So Alice adds this information to the top of each index card, above the actual words of her message. On the first card she writes "Letter from Alice, 1 of 20," on the second she writes "Letter from Alice, 2 of 20," and so on.
Alice has created a miniature header for her cards so that Bob does not lose them or mix them up. Similarly, all network packets include a header so that the device that receives them knows where the packets come from, what they are for, and how to process them.
Packets consist of two portions: the header and the payload. The header contains information about the packet, such as its origin and destination IP addresses (an IP address is like a computer's mailing address). The payload is the actual data. Referring back to the photo example, the thousands of packets that make up the image each have a payload, and the payload carries a little piece of the image.
Where do packet headers come from?
Where do packet headers come from?
In practice, packets actually have more than one header, and each header is used by a different part of the networking process. Packet headers are attached by certain types of networking protocols.
A protocol is a standardized way of formatting data so that any computer can interpret the data. Many different protocols make the Internet work. Some of these protocols add headers to packets with information associated with that protocol. At minimum, most packets that traverse the Internet will include a Transmission Control Protocol (TCP) header and an Internet Protocol (IP) header.
What are packet trailers and footers?
What are packet trailers and footers?
Packet headers go at the front of each packet. Routers, switches, computers, and anything else that processes or receives a packet will see the header first. A packet can also have trailers and footers attached at the end. Like headers, these contain additional information about the packet.
Only certain network protocols attach trailers or footers to packets; most only attach headers.
What are the advantages of using packets instead of sending entire files as one unit of data?
What are the advantages of using packets instead of sending entire files as one unit of data?
The primary advantage of using packets is that it enables packet switching, which is far more efficient for a large network.
Efficiency: Breaking data into packets allows information from many different users to travel over the same network equipment simultaneously. If data were sent as one long, unbroken stream, other users would have to wait their turn, slowing down the entire network.
Scalability: Because of packet switching, billions of devices can exchange data at the same time on the internet, rather than just a few
Page updated
Report abuse