i wanted to design a pen and pencil holder with phone holder and place to set any sticky note.
so my design came from imagination, there is no links of inspiration.
Software
Fusion 360 (Design)
LaserWorkV6
(LaserCut)
Machine
Morn LaserCutter (Laser Cut)
Materials
Plywood sheet 0.3*30*50 cm
Designing
1- sketch the design on paper first with dimensions.
2- create component from assemble sign and name it with suitable name.
BASE SHAPE (COMPONENT)
3- create rectangle shape from create sign with dimensions 170 mm*40 mm .
4- create small 2 rectangle with DM 3*10 mm and small circle with DM 3mm in-between.
5- forming all the rectangle and circles with Specific DM as the design say. D:
6- Then after sketching we click on finish Sketch
7- from create we choose extrude and select places that need to be with thickness 3 mm.
BASE SHAPE (COMPONENT)
3- create rectangle shape from create sign with dimensions 170 mm*40 mm .
4- create small 2 rectangle with DM 3*10 mm and small circle with DM 3mm in-between.
5- forming all the rectangle and circles with Specific DM as the design say. D:
6- Then after sketching we click on finish Sketch
7- from create we choose extrude and select places that need to be with thickness 3 mm.
Design of base of pen holder on Fusion 360
Design of base of pen holder after extruding on Fusion 360
SIDE OF MOBILE HOLDER (COMPONENT)
8- create rectangle shape from create sign with dimensions 140 mm*40 mm .
make 2 offset 15 mm. 10mm from modify to create line // to the 40 mm line of rectangle.
then make a point in the center of the line of the rectangle and draw 2 rectangle vertical of T-SLOT from constraints.
9- from create we choose extrude and select places that need to be with thickness 3 mm.
10- then from assemble we choose line from mobile holder of the T slot to the base.
Design of Mobile holder with dimensions on fusion 360
Design of mobile holder after extruding and jionting on fusion 360
SIDE OF PEN HOLDER (COMPONENT)
11- create rectangle shape from create sign with dimensions 100mm*72mm / 100 mm* 35.5 mm/ 100mm*35 mm.
then make a point in the center of the line of the rectangle and draw 2 rectangle vertical of T-SLOT from constraints.
12- from create we choose extrude and select places that need to be with thickness 3 mm.
13- then from assemble we choose line from mobile holder of the T slot to the base.
Design of side with dimensions on fusion 360
Design of side after extruding and jionting on fusion 360
Design of side with dimensions on fusion 360
Design of side after extruding and jionting on fusion 360
Design of side with dimensions on fusion 360
Design of side after extruding and jionting on fusion 360
The final Design of the pen holder
ON Fusion 360
14- saving each component sketch as DXF
15 -we import each DXF in laserworkv6 and remove any overlapping, then fix speed and power.
The design on laserworkv
The final Design of the pen holder
REAL MODEL
firstly laser cuting, i designed pen holder on Fusion 360 in with full dimensions, then saved the shape as DXF.
then I set it in our intermediate program laser workv6
1- Import DXF design.
2- define the lines (cut or scan), remove any overlap.
3- set the power, speed of laser used (cut means low speed, high power), (scan means high speed, low power).
4- prepare the laser cutter to use.
5- fix the plywood sheet on laser cutter by Sticky tape.
6- processing (cut).
7- paint the product.
8- woola i get beautiful shape.
The final Design of the pen holder
REAL MODEL
The design on laserworkv
It wasn't a problem but it was difficult to set the nut with nail, it so tiny to me the same as the last week assignment but i used Tweezers to fix the nut till i can connect the nail to it.
my friend in maker diploma faced a problem in saving his sketches as DXF but i helped him
I Learned how to design any shape on Fusion 360 and how to connect any shape with T slot, it is going to help me to design my final project.