Embedded Files
Tell us about your assignment's idea for this week. Why do you care about this idea? What inspired you? (Please include images or links to sources of inspiration)
Tell us about your assignment's idea for this week. Why do you care about this idea? What inspired you? (Please include images or links to sources of inspiration)
Title of Media
Buzz wire game
-To make a circuit for the first time by producing a working device ...
I loved this game since I was young and wanted to make it .I saw a video of a person and learned from him how to make it .
-The game works when the user moves the wire around the fixed wire. When the wires touch each other, the circuit is closed and the buzzer appears and the LED lights up
https://www.youtube.com/watch?v=ZsoiMZLkK1Y
Tool Chain
Tool Chain
Which software/machines/materials did you use in the assignment? Why?
Which software/machines/materials did you use in the assignment? Why?
autodesk Tinkercad to to simulate the electric circuit
white cardboard
circuit components:
- jumper wires
- on/off switch
-breadboard
-led
-wire
-buzzer
- 5v adaptor
- resistor 220 ohm
tools:
-hot glue
-cardboard
-wire
Design/Preparation Process
Design/Preparation Process
Explain the design and/or preparation process of your assignment. How did you use the tool or software to design and/or prepare your assignment before fabrication/implementation?
Explain the design and/or preparation process of your assignment. How did you use the tool or software to design and/or prepare your assignment before fabrication/implementation?
First, I tried to connect the RGB led and the buzzer, how does it work
to Calculate the voltage
-The led need ( 13.5 ) MA
- buzzer need (8.33) MA
8.33+13.5= 21.83MA
And i used 5v adapter because I searched in the datasheet of the buzzer sensor, and i found that the operating voltage is 5v is suitable
I used tinkercad to check the correctness of the simulation of the electrical circuit.
First, I prepared all components that I will use inside the electrical circuit, then started I connected all the components in parallel to the breadboard and the power source 5 v adaptor.
then press start simulation
-I used PushButton One side of the pushbutton is connected to the LED and the buzzer, and the other side is connected to the power supply's positive side.
- led positive leg to pushbutton and buzzer , negative leg to resistor 220 ohm to another buzzer side .
Development/Implementation Process
Development/Implementation Process
Explain the development/implementation process of your assignment. How did you use the machine/tool to manufacture or implement the design of your assignment?
Explain the development/implementation process of your assignment. How did you use the machine/tool to manufacture or implement the design of your assignment?
Then I connected the buzzer, the lock and on/off switch , the wire that the current will pass through, and the other wire that closes the circuit when playing until it closes, and the buzzer Shows the sound and the lamp lights up .
i connected the LED Cathode leg with a 220 ohm resistor, and the Anode leg is connected to one side of the pushbutton.
The buzzer's negative leg is connected to the power supply's negative leg , and the positive leg is connected to the same side of the pushbutton the LED is connected.
on/off switch positive side connedcted to the positive side of the adaptor .. negative side to the breadboard negative side
Then I tested to make sure that all components are working and the game works
I cut the cardboard and made sizes to insert the parts and wires and made holes for the led, buzzer and power source
I put each part in its place, the buzzer in its place, the on off switch, and the led from the front so that the user can see it while playing to show the light
And here is the final form after inserting all the components inside and making the fixed wire and the moving wire that closes the circuit in case of loss when the user plays and put the led in front to show the lighting and put the button inside
The game works when the user moves the wire around the fixed wire. When the wires touch each other, the circuit is closed and the buzzer appears and the LED lights up
Community of Learning
Community of Learning
Did you ask for feedback? What are the ideas that others have contributed or suggested? What was someone else’s idea that you built upon? How did you help your peers? How did your peers help you?
Did you ask for feedback? What are the ideas that others have contributed or suggested? What was someone else’s idea that you built upon? How did you help your peers? How did your peers help you?
Title of Media
I had failed to make the moving wire and made the circuit on Tinker cad, but Esraa helped me a lot and sent me this picture for clarification
Overcoming Challenges
Overcoming Challenges
When you got stuck, what/who did you turn to? At what point did you have to pause to research or learn more before moving on? What are some mistakes, pitfalls, or challenges that others can avoid if they were doing this assignment?
When you got stuck, what/who did you turn to? At what point did you have to pause to research or learn more before moving on? What are some mistakes, pitfalls, or challenges that others can avoid if they were doing this assignment?
i tried a lot to make the circuit, I had failed to express on the moving wire and the whole circuit worked on a disguise, almost, but Esraa helped me a lot and sent me a picture for clarification and I tried a lot until I succeeded but i used the led instead of the bulb.
The LED needed 9 volts and the buzzer needed 5 volts, and the connection was wrong and a regulator must be used to regulate the voltage and the connected must to be in parallel not in series
Title of Media
Final Project
Final Project
How can you use the skills and knowledge that you've acquired this week in your final project?
How can you use the skills and knowledge that you've acquired this week in your final project?
I learned how to make circuit more than one components and how they work together
WOW!
WOW!
What is the coolest thing that you've learned this week? What is something that you will never forget from this week?
What is the coolest thing that you've learned this week? What is something that you will never forget from this week?
I was very happy to make my first circuit with two components
Title of Media
Weekly Digest [OPTIONAL]
Weekly Digest [OPTIONAL]
Tell us about any other cool things that you've made this week: in the Hands-on activity, tutorial examples, exercises, or any other cool mini-project that you tried out aside from the assignment.
Tell us about any other cool things that you've made this week: in the Hands-on activity, tutorial examples, exercises, or any other cool mini-project that you tried out aside from the assignment.
We had a makeathon we were asked to build a car by designing, manufacturing, wiring and integrating all the components. We started making circuits on breadboards and making sure everything worked correctly through many experiments and then we cut the parts and made laser cuts to shape the car.
After that, we installed all the parts and made a competition among all the groups . I was in the team with Farida and Mohab
Title of Media
Assignment Design Files
Assignment Design Files
Title of Media
Page updated
Report abuse