Embedded Files
PROCESS MAP
PROCESS MAP
BACKGROUND
BACKGROUND
Sprint two start with our second journey
(الفاميه العاكس النيكل)
Starting with smile face and all hope to achieve our dream.
Place: التوفقية and Mustafa's lab
Time: 1 o'clock
Target: ( search on mirror film, design PCP, and finishing )
Characters:
Mostafa
Ahmed
فسدق
OBJECTIVE #1: : A day without a achemienent
OBJECTIVE #1: : A day without a achemienent
Trial #1 (Unsuccessful): searching on mirror film, fixation of base and led
Trial #1 (Unsuccessful): searching on mirror film, fixation of base and led
Step 1: We start second sprint with three member in the group then we surprise that we will be two only we respect all conditions. We told to our self Don't all task will be well.
Yesterday, we make along tour searching on mirror film in October. 😡 There is no escape to go to Tawfiqia.
Step 2: Fixation of base with faces.
Step 3: Fixation of led in the edges of 12 faces.
Step 4: We had many problems that we can't have space to tell. such as the laptop keyboard doesn't work.
Our product owner: it seems better design but we should think in our future about the assembly and disassembly.
Problem: Fixation of base with faces (design failed) the consideration of easy disassembly. Searching in mirror film.
Potential Solution: Redesign fixation, searching on another glue for led, and mirror film In Tawfiqia street.
Trial #2 (Successful):
Trial #2 (Successful):
Step 1: We search on it with our hope that we will find and we will not need to go to al Tawfiqia. we want to tell you that we are now in Tawfiqia.
Step 2: Some happiness, we bought what we want this mirror film. Journey ended at 7:30. We are on way to next journey be motivated and stay tuned you will see great inch Allah.
Step 3: Buying the component with Tax bill. The common Words. seller of mirror film: Tax bill for 60 pound (Ha-Ha).
Step 4: Finding the new keyboard for laptop
Step 5:
Bought the all component needed it is 8 o'clock time start for second journey.
Ended with smile face like the starting
OBJECTIVE #2: Task (journeuy) 2 start
OBJECTIVE #2: Task (journeuy) 2 start
Trial #1 (Successful): Disassembly(52 bolt and nut) the all face , assembly again and replace the keyboard with new one.
Trial #1 (Successful): Disassembly(52 bolt and nut) the all face , assembly again and replace the keyboard with new one.
Step 1: working on parallel technique one staring to disassembly with taking care about missing the bolt and nut. and other starting to replace keyboard (it is important for writing code).
Step 2: cutting the mirror film in same size of faces, washing the acrylic face using peril, and assembly the face together.
Step 3: trying to fixed the led with wax gun it is fixed. product owner ( the wax appear when the led off).
Step 4: Thinking together using black film to disappear the wax. cutting equal size and putting on edges.
Step 5: it is time for testing led and keyboard.
Step 6 : testing the our overall smart lamb.
Step 7: testing the mirror film (without coding the color change with push button)
Step 8: Taking the comments for future modified.
Step 9: write what is missed.
the cat (فسدق) reaction after seeing the our lamb (led) on.
Tring to end each journey in this project with real smile face
OBJECTIVE #1: Journey three start
OBJECTIVE #1: Journey three start
Trial #1 (successful and non Successful): Drawing the connection, connect using Arduino, coding error, wrong connection in Bluetooth module, and problems in welding led strips. design the PCP on Eagle (using Attiny) (rosette 4 inputs), and fabrication, welding, fixed the PCP, and testing the lamb.
Trial #1 (successful and non Successful): Drawing the connection, connect using Arduino, coding error, wrong connection in Bluetooth module, and problems in welding led strips. design the PCP on Eagle (using Attiny) (rosette 4 inputs), and fabrication, welding, fixed the PCP, and testing the lamb.
Step 1: Writing on board what is not finish yet. (Done)
Step 2: Drawing the components connection on paper to make it as draft see following figure. (Done)
Step 3: Making sure about all connections and components works using breadboard and Arduino Uno. (Done)
Step 4: Uploading code on attiny PCP caused error during uploading. (Problem) solving
Step 5: No data received from Bluetooth module thinking about wrong connection in Bluetooth module. Problem solving by reading the data sheet of HC-05.
Step 6 : welding led strips together to connect with PCP in one rosette with four pin. problem solved by replacing 100Watt iron with 40 Watt.
Step 7: design the PCP on Eagle (using Attiny) no found that (rosette 4 inputs) with footprint 5mm. problem solved using two rosette with 2 inputs
Step 8: Fabrication PCP, welding Component
Step 9: fixed the PCP in base
Step 10: Testing the overall lamb with PCP.
CONCLUSION
CONCLUSION
Target reached of all our journeys
We reach to final product of our design smart communication lab taking working three weeks to reach our target (achieve issues) with all attempts to please our product owner. we tried to write all difficult problems which we faced to save your time if you want to manufacturing our lamb and give you a lot experience we got during the project. we ask about comments about our lamb. For example, Our instructors always provide us with comments and creative ideas and all experts in fab lab help us with their ideas. we want to thanks all worker in Fab Lab. we put to image our design and target model.
It is your time to guide but (taken in consideration that there are some restriction in the possibilities)
Give us your ideas and opinions about product.
Page updated
Report abuse