Embedded Files
These are instructions for the downloading, installing and the settings for Cisco AnyConnect app on a mobile device.
These are instructions for the downloading, installing and the settings for Cisco AnyConnect app on a mobile device.
Images are from an Android device, iPhone screens may be slightly different.
STEP 1: Download and install VPN Client Software
STEP 1: Download and install VPN Client Software
Search for Cisco AnyConnect in appropriate app store. Or select from bellow.
It is recommended to follow the rest of the directions on a device besides your phone so that you can perform these steps on your phone.
It is recommended to follow the rest of the directions on a device besides your phone so that you can perform these steps on your phone.
STEP 2: Setup the VPN on your phone.
STEP 2: Setup the VPN on your phone.
a) Open the AnyConnect app.
b) If needed, tap Connections.
c) Tap Add New VPN Connection
d) Tap Description
e) Enter in a name for your connections, such as RCS, and select OK.
f) Tap Server Address.
g) Enter vpn.romulus.net and then select OK.
h) Tap Done.
i) Back at the main screen, tap the On/Off slider to turn on AnyConnect.
j) A warning about an Untrusted VPN Server may appear. Do not worry, tap Change Settings.
k) Tap Block Untrusted Servers to uncheck it.
Make sure there is NOT a check mark next to Block Untrusted Servers, and return to main screen.
l) Back at the main screen, tap the On/Off slider to turn on AnyConnect.
m) The first time a connection is made, permission is needed by the mobile device to make the VPN connection.
Tap OK to give it permission.
n) A Security Warning: Untrusted Certificate window will appear, tap Continue.
o) Your Group should be ROVPN.
p) Enter in your RCS username (do NOT add @romulusk12.org) and password, and then tap Connect.
You should now be connected to the RCS district network. To disconnect, simple tap the On/Off slider to Off.
To reconnect in the future, tap the On/Off slide to On and enter in your credentials again.
Report abuse