Drivers are tools that are used to hold or turn nuts, bolts and screws for robot assembly
A T15 driver is used to turn the 8-32 bolts with a six pointed star shaped drive (opening in the bolt head).
Location: Tray on the shelf in the Large Blue Tool Cabinet
A T15 driver with a rounded head, allowing you to access the bolt from an angle. Great for getting into awkward spaces!
Location: Pegboard hangers on the wall inside the Large Blue Tool Cabinet
A T-15 Torx Key is used to install or remove 8-32 bolts, it is identified by a 6-lobe head.
Location: Tray on the shelf in the Large Blue Tool Cabinet
A 308 Torx T-handle is used for installing and removing screws, it has a strong and durable handle which is used for maximum torque.
Location: Pegboard hangers on the wall inside the Large Blue Tool Cabinet
A 308 Torx T-handle is used for installing and removing screws, it has a T-Handle design that delivers more torque to the fasteners. It has two heads, both are 6 lobes and the difference is the amount of torque to the fasteners.
Location: Pegboard hangers on the wall inside the Large Blue Tool Cabinet
A 5/64" Hex Key is used for tightening and loosening the set screws on collars with black hex drive set screws as well as 6-32 bolts used for the original rack gears and the old 393 Cortex motors.
Location: Tray on the shelf in the Large Blue Tool Cabinet
A 3/32 Hex Key is used for tightening and loosening hexagonal bolts and other compatible fasteners.
Location: Tray on the shelf in the Large Blue Tool Cabinet
T8 Driver is used for tightening and loosening the set screws on collars with silver colored T8 drive set screws. Can also be used in a pinch to work with anything with 5/64" hex drive, including 6-32 bolts used for the original rack gears and the old 393 Cortex motors
Location: Tray on the shelf in the Large Blue Tool Cabinet
A 3/32 Hex Driver is used for tightening and loosening hexagonal bolts and other compatible fasteners
Location: Tray on the shelf in the Large Blue Tool Cabinet
A nut driver is a hand tool for tightening or loosening nuts and bolts
A hacksaw is used for cutting plastic, steel, and other metals.
Location: On the right door of the Large Blue Tool Cabinet
A Nut Driver is used to tighten nuts in narrow areas that are hard to reach with regular wrenches.
Location: Pegboard hangers on the wall inside the Large Blue Tool Cabinet
Open-ended Wrenches are used for nuts and bolts that are hard to reach. The design allows the user to approach the fastener from two different directions.
Location: Tray on the shelf in the Large Blue Tool Cabinet
Recoil Clutch Wrenches are made of hardened steel to withstand hard recoil.
Location: Left door of large blue cabinet.