Students will design and make an charcuterie resin pour board using the mitre saw, table saw, planer and router.
Students will practice detailed design sketching and daily project documentation in their student portfolios
Students will gain experience using the following shop equipment: table saw, mitre saw, planer, router, hand-held orbiter sander.
Students will gain experience measuring and cutting wood precisely and mixing and pouring resin.
Watch the 17 epoxy pours video above to get ideas for your board.
Watch Make an Epoxy Riverboard Easy above
Board must be either 10" x 18" or 16" x 11"
Decide on wood: walnut or olive
Choose epoxy color
Make a sketch on plain white paper showing wood (colored approximately to the correct color) and resin (also approximate) color. The natural shape of the wood shapes your "river." But right now you can decide if the resin will pour around your wood like in the board with the "R", if it will pour on just one side like the "M" or if it will pour in between two pieces of wood.
walnut with Caribbean & caviar blue
Purple & caviar with olive wood
ocean, caviar and pearl with walnut wood
olive wood with emerald green
walnut with savage (red) and battleship
olive wood with midnight, battleship, pearl
walnut with Caribbean
cut your wood
chop the correct length using the chop saw
cut your 16" or 18" piece of wood down its length using the table saw
sand any bark from the edge of the wood
physically check to make sure you wood fits in the mold