Leveling 3d Printer

Leveling the 3d Printer manual: I was successfully able to level the 3d printer with a piece of paper. I had to go around to each corner about 4-5 times to make sure it was as level as it could be. This process takes a long time, but your not using filament so it saves some money. I did not take a video or picture because I forgot.

Leveling with a leveling program: I found a leveling program on Thingiverse that was highly rated to level the bed. I need to re download Cura on my other computer because it doesn't work on my school computer. It let me install it and open it but when I get that far it says my computer's outdated and to install an older version. I tired to find an older version but the older versions don't support Ender-3. I put the G-code on the printer SD card and it works. However, I had to abort the print because the printer's bed was too close to the nozzle. I will reattempt the print Thursday and will add the screenshot to this page if I get it to print. I will provide the Thingiverse page here.

I got it to print the skirt, but I stopped the print before it began to print the dots in the corner. The print was supposed to make the skirt, a dot in each corner, and lastly a dot in the middle. However, this print doesn't work well on this printer so if I were to level the bed again, I would make a "x" shape so I could get a more accurate print and in turn a better idea on how to level the bed. Also it could be that the design I got from Thingiverse isn't compatible with the printer despite it being an Ender.