NJIT PHYS

This assignment was a test  on Acceleration, I feel like I did my best on this test, There nothing id like to change, although I know I could do better on the test, and ever better if the teacher thought me better on the topic. For this test i got a 73%

This assignment is a quis grade, we took this quiz before starting  our lab. This quiz was confusing because the reading was confusing so the quiz also became confusing to me. I earned a 61 on this quiz, and if I had to change something about the quiz, I would change the amount of time we were given to take it, because I truly felt like I was rushing throughout the whole process.

This assignment was a report, that I had to do for a lab. For this lab me and my peers worked cooperatively on it. In this lab Natalie brought the paper to Ms. Atabany then returns it because Ashley had to turn it out since she had the procedure. They both then gather all the materials to start the process . We then had to find more string since the one we saw was not enough for the last, Ms. Atabny then called all the procedure people  from each group for a procedure discussion. Then Natalie had some complication with the setup. Then she changed the mass from 10g to 50 g. The Ms. tabny came over and gave us 50 or 10 pints of faces even though when we asked her about the lab she told us we were doing it right, but still falsely took points off of us. This lab took me under 2 hours to finish and I got a 92% as a grade.

This assignment was a report, that I had to do for a lab. For this lab me and my peers worked cooperatively on it. In this lab At the start of this lab we had gathered all the materials and built the support stand and set up the s shaped hook. We then took the first spring and attached it to the hook. Then we got a ruler and attached it near the spring to the support stand. After that we decided what mass to use, and since they were already labeled with the mass we just used the one it already had. Then we put the mass on the spring and started to take data, the displacement of the spring, what was the spring's length at equilibrium, the mass, and we started to count the oscillations. Then after we did that 3 times, we changed the spring and used a tighter one. Then we recorded the data again and did it 3 more times. During this we also took a video of the spring oscillating during all of our trials. This lab also took me under 2 hours to finish and I got a 92% as a grade.

This assignment was graded as a quiz. In this assignment we had to solve some problems using  torque and its formula by analyzing and understanding the problem. This assignment was okay not too easy or hard. I earned a 100 for this assignment and i was very proud of that.

This assignment was a test for marking period 3. This was finals test based on everything that wed learned for the marking period. This test was not the easiest and I earned a 66, and I think I should've better prepared for it. I am definitively not satisfied with my grades, and I will try to do better in the future.