Resolve Your Printer Problem -
Are you facing HP Printer Error 59.F0? In this error code you may encounter that the ITB is stucked and unable to rotate. Fix this issue with your printer using the following guide. So lets's get started, first understanding what actually is HP Printer Error 59.F0. Moving then to its fixing steps.
When you encounter problems like difficulty of transfer alienation or certain issues with SR9 sensor. You may notice that intermediate transfer belt doesn't rotate.
HP Printer Error 59.F0 can occur to your printer in case the internal motor has some problem.
You may see numerous methods listed below, follow the one that works in your situation-
Printer Resetting- In this you need to turn ON your printer then resetting its printer settings once again. Thereafter, simply removing the Surge protector will sort out your problem.
Readjust ITB- After you reset the ITB, ensure that ITB and a transfer-roller-disengagement sensors are properly connected. Also, check connection between ITB and DC controller PCA.
Check ITB- Test the ITB fully by switching off the printer & removing wire. If you find the flag destructed then replace it. Futher, ensure that sensor SR9 is tested fully. Press “HOME” then “diagnostics” button. After tapping “OKAY” go for “Manual Sensor Test”. From ITB Cavity remove SR9 flag & look the sensor response on the display.
Contact HP Technical Help- Lastly, if you find that nothing is giving you satisfied results then you must contact HP team through its official website.