Publications

INTERNATIONAL JOURNAL PUBLICATION

1. P. Kumar, J. Victor, R. Arunachalam, A. I. Mourad, R. Muraliraja, M. Al-maharbi, V. Murali, and M. Manik, (2019): Production of aluminium alloy-based metal matrix composites using scrap aluminium alloy and waste materials: Influence on microstructure and mechanical properties, Elsevier Editorial System (tm) for Journal of Alloys and Compounds.https://doi.org/10.1016/j.jallcom.2019.01.115

2. Krishnan, P., Arunachalam, R., Husain, A., Al-Maharbi, M., 2020. Studies on the Influence of Stirrer Blade Design on the Microstructure and Mechanical Properties of a Novel Aluminium Metal Matrix Composite. J. Manuf. Sci. Eng. 1–25. https://doi.org/10.1115/1.4048266

3. R.Arunachalam, P. Kumar, and R. Muraliraja, (2019): A review on the production of metal matrix composites through stir casting: Furnace design, properties, challenges, and research opportunities, Elsevier Editorial System (tm) for Journal of Manufacturing Processes, vol. 42, no. December 2018, pp. 213-245, 2019.https://doi.org/10.1016/j.jmapro.2019.04.017

4. Mourad AI, Victor J, Kumar P (2023) Production of novel recycled hybrid metal matrix composites using optimized stir squeeze casting technique. J Manuf Process 88:45–58. https://doi.org/10.1016/j.jmapro.2023.01.040

5. R. Arunachalam, S. Piya, P. K. Krishnan, R. Muraliraja, J. V. Christy, and A. I. Mourad,(2019): Optimization of a stir, squeeze casting parameters for production of metal matrix composites using a hybrid analytical hierarchy process, Taguchi-Grey approach, Eng. Optim., vol. 0273, no. 15X, pp. 1-19, 2019.https://doi.org/10.1080/0305215X.2019.1639693

6. Christy, J.V., Arunachalam, R., Mourad, A.-H.I., Krishnan, P.K., Piya, S., Al-Maharbi, M., 2020. Processing, Properties, and Microstructure of Recycled Aluminum Alloy Composites Produced Through an Optimized Stir and Squeeze Casting Processes. J. Manuf. Process. 59. https://doi.org/10.1016/j.jmapro.2020.09.067

7. Ahmed Al-Quwaiti, Pradeep Kumar Krishnan, (2016): Study and Design of Flare Reduction Initiative in the Region: A Case Study of Gas Flaring Reduction at Oman Liquefied Natural Gas Company, British Journal of Applied Science and Technology(BJAST)14(5).

8. Fuhaid, M.S., Krishnan, P.K., 2020. Manufacturing and Friction Welding of Aluminium Matrix Composites – Review of Current Status and Future Directions. TEST Eng. Manag. Mattingley Publ. Co., Inc. 83, 1122–1130.http://testmagzine.biz/index.php/testmagzine/article/view/7402

9. Fuhaid, M.S., Murali, V., Maleque, M.A., Krishnan, P.K., Rahaman, M.A., 2021. Synthesis and Characterization of Aluminium Composite with Graphene Oxide Reinforcement Synthesis and Characterization of Aluminium Composite with Graphene Oxide Reinforcement. IOP Conf. Ser. Mater. Sci. Eng. 1–12. https://doi.org/10.1088/1757-899X/1057/1/012005

10. Rayapandi Thevar, T., V, R., Krishnan, P.K., R, T., Arunachalam, R., 2020a. A novel approach for the production and characterisation of aluminium–alumina hybrid metal matrix composites. Mater. Res. Express. https://doi.org/10.1088/2053-1591/ab8657

11. Rayapandi Thevar, T., V, R., Krishnan, P.K., R, T., Arunachalam, R., 2020b. Microstructural and Mechanical Properties of Al-Reinforced with Micro and Nano Al2O3 Particles using Stir-Squeeze Casting Method. Int. J. Mech. Prod. Eng. Res. Dev. 10, 193–202. https://doi.org/10.24247/ijmperdjun202018

12. Kaithari, D.K., Krishnan, P.K., Al-Riyami, A., 2021. Recycling of Used Lubricating Engine Oil by A Solvent Extraction Process. Int. J. Mech. Prod. Eng. Res. Develpment 11, 151–158.https://dx.doi.org/10.47392/irjash.2022.001

13. Kaithari, D., Al Balushi, M., Krishnan, P.K., 2021. Study of hydrogen sulphide removal from heavy crude oil Study of Hydrogen Sulphide Removal from Heavy Crude Oil. AIP Conf. Proc. 2396, 030010, 01–07.https://doi.org/10.1063/5.0066602

14. Keloth, D., Sulaiman, B., Krishnan, P.K., 2021. Enhanced Biogas Production from Animal Waste using a Gas-Membrane Absorption Anaerobic Reactor. AIP Conf. Proc. 020003, 01–08. https://doi.org/10.1063/5.0066601

15. Krishnan, P. K., & Humaid Alrisi, B. Z. . (2021). Design and Development of an Electronic Sieving for Sand Separation using Node MCU System. Journal of Modern Mechanical Engineering and Technology, 8, 31–36. https://doi.org/10.31875/2409-9848.2021.08.4

16. P. K. Krishnan and M. Al Maqbali, “Investigating the Viscosity Reduction of Heavy Crude Oil Using Organic Materials to Improve Oil Production and Transportation” Int. Res. J. Adv. Sci. Hub, vol. 04, no. 01, pp. 1–6, 2022 ,https://doi.org/10.47392/irjash.2022.001

17. P. K. Krishnan and A. Abdullah Reashid, “Clean Energy from Plastic : Production of Pyrolysis Oil from Plastic Waste,” Int. Res. J. Adv. Sci. Hub, vol. 3, no. 11, pp. 243–250, 2022, doi: https://dx.doi.org/10.47392/irjash.2021.262.

18. Ebenezer, S.P., Pramanck, A.K., Ramachandran, K.P., Krishnan, P.K., 2022. Study of Noise Annoyance and Vibration of Constructal Designed Window Air Conditioner. Trends Sci. 19, 1–20. https://doi.org/https://doi.org/10.48048/tis.2022.2693

19. Jaber, A.M., Krishnan, P.K., 2022. Development of a sustainable novel aluminum alloy from scrap car wheels through a stir-squeeze casting process. Kov. Mater. Mater. 60. https://doi.org/10.31577/km.2022.3.151

20. Muraliraja, R, Krishnan, P.K, P Mohanraj, T Vinod Kumar, and C Dhanasekaran. 2022. The Effects of Electroless Ni-P Coated SiC on the Properties of Magnesium Composite. Materials Performance and Characterization 11: 223–35. https://doi.org/10.1520/MPC20210089.

21. Mani M, Thiyagu M, Kumar Krishnan P. Experimental investigation of Kevlar/carbon/glass/polyurethane foam epoxy hybrid sandwich composites with nano silicon particles in low-velocity impact events. Mater Today Proc 2023. https://doi.org/https://doi.org/10.1016/j.matpr.2023.03.209

22. Mani M, Thiyagu M, Kumar Krishnan P. Flexural and compression behavior analysis of hybrid sandwich composites with nano silicon particles in low-velocity impact analysis. Mater Today Proc 2023. https://doi.org/https://doi.org/10.1016/j.matpr.2023.03.276.

23. Mani M, Thiyagu M, Kumar Krishnan P. Review of the effects of low-velocity impact events on advanced fiber-reinforced polymer composite structures. Mater Today Proc 2023. https://doi.org/https://doi.org/10.1016/j.matpr.2023.04.255.

24. Raj Thilak Krishnan; Rajan, S, Ramesh; Satish Babu, Boppana; Pradeep Kumar, K. (2023) ‘Sustainable Development on Production and Characterization of Metal Matrix Composites using Stir Casting’, Journal of Physics Communications, pp. 0–15. doi: https://doi.org/10.1088/2399-6528/acd748.

25. Kannan, P. R., Thanigaivelan, R., Thiraviam, R., & Pradeep Kumar, K. (2023). Performance studies on hybrid nano-metal matrix composites for wear and surface quality. Materials Science-Poland, 41(2), 288–300. https://doi.org/10.2478/msp-2023-0020

26. Mani, M., Murgaiyan, T. and Krishnan, P. K. (2023) ‘Structural performance evaluation of hybrid polymer composites for critical infrastructure pick-and-place robot grippers using silica nanoparticles’, International Journal of Structural Integrity, 14(6), 932–945. https://doi.org/10.1108/IJSI-06-2023-0052

27. Mani, M., Thiyagu M, and Krishnan, P. K. (2024) ‘Investigating silicon nanoparticles modified sandwich polymer composites for enhanced mechanical performance' Advances in Materials and Processing Technologies, 1–15. https://doi.org/10.1080/2374068X.2024.2307075

28. Raj Thilak Krishnan; Rajan, S, Ramesh; Satish Babu, Boppana; Pradeep Kumar, K. 2024 ''Microstructural investigation of tensile fractography and wear properties of scrap aluminium engine head ( SAEH ) reinforced with fresh and spent catalysts from petrochemical industries using stir casting method, Discov. Appl. Sci. ''6. https://doi.org/10.1007/s42452-024-05841-1

29. Mani, M., Thiyagu, M. and Krishnan, P. K. (2024) ‘Effects of moisture absorption analysis of kevlar / carbon / glass / polyurethane epoxy hybrid sandwich composites with nano silicon particles’, Advances in Materials and Processing Technologies. https://doi.org/10.1080/2374068X.2024.2342048.

30. S. Al Oraimi, P. K. Krishnan, A. A. Seman, and Z. Hussain, “Sustainable and Novel Development of Metal Matrix Composite Using Scrap Aluminium Alloy Reinforced with Scrap Borosilicate Glass Particles by Stir Casting Technique” Compend. by Pap., vol. 40, 2024, doi:10.59953/paperasia.v40i3b.111.

31. Mani, M., Murugaiyan, T., & Kumar Krishnan, P. (2024). Fiber reinforcement of polymer hybrid sandwich composites using SNiPs: effect of silica nanoparticles on flexural and compressive strength. The Journal of The Textile Institute, 1–9. https://doi.org/10.1080/00405000.2024.2384103

32. Oraimi S Al, Seman AA, Krishnan PK, Hussain Z (2024) Development of metal matrix composites via stir casting using recycled aluminum alloy reinforced with spent catalytic converter (scc) particles. Malaysian J Microsc 20:110–120

33. Achuthan, M., Pradeep Kumar, K., Al Rashdi, M., Al Aamri, A.K. (2024). Characterization of Aluminum Metal Foam from Industrial Waste Al 6063 Cast Aluminum Alloy Using Various CaCO3 Foaming Agent Concentration. In: Kurniawan, D., Nor, F.M. (eds) Advances in Manufacturing Processes and Smart Manufacturing Systems. GCMM 2023. Lecture Notes in Networks and Systems, vol 1214. Springer, Cham. https://doi.org/10.1007/978-3-031-80341-3_25

34. Al Hadhrami A, Al Mahrami L, Kaithari DK, Krishnan PK (2025) Enhancing crude oil production efficiency through emulsion viscosity reduction: An experimental study. AIP Conf Proc 3162:20063. https://doi.org/10.1063/5.0243049

35. P.K. Krishnan, S. Al Oraimi, Effect of Stirrer Design on Particle Distribution of Aluminium Composite in Stir Casting Process Using CFD Simulation, in: C. Pon Selvan, N. Sehgal, S. Ruhela, N.U. Rizvi (Eds.), Signals Commun. Technol., Springer Nature Switzerland, Cham, 2025: pp. 769–773. https://link.springer.com/chapter/10.1007/978-3-031-68952-9_99

36. J. Venumurali, S. Turaka, D. SanthaRao, P.K. Krishnan, T. Tirumala, K. Ravindra, K. Rajesh, B. Pappula, S. Makgato, Computation of structural parameters developed by shot peening and their influence on residual stress and wear properties of AA2017 alloy, J. Alloys Compd. 1036 (2025). https://doi.org/10.1016/j.jallcom.2025.181650.

37. V. Jagannati, M. Gurram, S. Turaka, V. Vardhana, B. Naidu, G. Kumar, P. Kumar, R. Sarimalla, T.A. Sebaey, A. Kumar, Review of tensile anisotropy in laser powder bed fusion 316L stainless steel : Build orientation effects and optimisation using machine learning, J. Mater. Res. Technol. 38 (2025) 5318–5341. https://doi.org/10.1016/j.jmrt.2025.08.249.