A. 期刊論文

Shih-Hao Chen, Ming-Chieh Chiang, Chinghua Hung*, Shang-Chih Lin, and Hsiao-Wei Chang (2013, Apr). Finite element comparison of retrograde intramedullary nailing and locking plating fixation with/without an intramedullary allograft for distal femur fracture following total knee arthroplasty. The Knee, http://dx.doi.org/10.1016/j.knee.2013.03.006. (SCI). 本人為通訊作者.

Jung-Chung Hung, Yen-Pin Tsai, Chinghua Hung* (2013, Jan). Development of a new apparatus for ultrasonic vibration-assisted glass hot embossing process. Precision Engineering, Vol. 37, No. 1, pp. 222-227. (SCI). 本人為通訊作者.

Zheng-Cheng Zhong, Chinghua Hung, Hung-Ming Lin, Ying-Hui Wang, Chang-Hung Huang, Chen-Sheng Chen* (2012, --). The Influence of Different Magnitudes and Methods of Applying Preload on Fusion and Disc Replacement Constructs in the Lumbar Spine: A Finite Element Analysis. Computer Methods in Biomechanics and Biomedical Engineering. (Accepted). (SCI).

Chih-Chia Lin, Jhen-Jie Yan, Chinghua Hung*, Jung-Chung Hung, (2012). Fabricating High-Aspect Ratio Microchannels on Metallic Sheets Using Hydroforming. Steel Research International, Special Edition, pp. 671-674. (SCI). 本人為通訊作者.

M. T. Yu, T. Y. Lin*, Chinghua Hung (2012). Sequential quadratic programming method with a global search strategy on the cutting-stock problem with rotatable polygons. Intelligent Manufacturing, Vol. 23, Number 3 pp.787-795. (SCI).

Yen-Pin Tsai, Jung-Chung Hung, Li-Chao Yin, Chinghua Hung* (2012). Ultrasonic-Vibration Assisted Optical Glass Hot Embossing Process. Advanced Manufacturing Technology, Vol.60, No. 9, pp. 1207- 1213. (SCI). 本人為通訊作者.

Cheng-Chan Lo, Kai-Jow Tsai, Shih-Hao Chen, Zheng-Cheng Zhong, Chinghua Hung* (2011). Biomechanical Effect after Coflex and Coflex Rivet Implantation for Segmental Instability at Surgical and Adjacent Segments: A Finite Element Analysis. Computer Methods in Biomechanics and Biomedical Engineering, Vol. 14, No. 11, pp.969-978. (SCI). 本人為通訊作者.

Cheng-Chan Lo, Kai-Jow Tsai, Zheng-Cheng Zhong, Shih-Hao Chen, Chinghua Hung* (2011). Biomechanical difference of Coflex-F and pedicle screw fixation combined with TLIF or ALIF: A Finite element study. Computer Methods in Biomechanics and Biomedical Engineering. (SCI).本人為通訊作者.

Chi-Chen Huang, Chinghua Hung*, Jung-Chung Hung , Chia-Rung Lin (2011). Finite Element Analysis on Neck-spinning Process of Tube at Elevated Temperature. dvancedManufacturing Technology, Vol. 56, No. 9, pp. 1039-1048. (SCI). 本人為通訊作者.

Hong-Jung Hsieh, Tung-Wu Lu*, Sheng-Chang Chen, Chia-Min Chang, Chinghua Hung(2011). A New Device for in Situ Static and Dynamic Calibration of Force Platforms. Gait and Posture, Vol 33, Issue 4, pp. 701-705. (SCI).

Huang-Chi Tseng, Jung-Chung Hung, Chinghua Hung*, Ming-Fu Lee (2011). Experimental and numerical analysis of titanium/aluminum clad metal sheets in the sheet hydroforming. Advanced Manufacturing Technology, Vol. 54, pp. 93- 111. (SCI). 本人為通訊作者.

Yen-Pin Tsai, Chinghua Hung (2011). Design of Optical Components for a Light Emitting Diode Zoom Illumination System. Optical Review, Vol. 18, No. 2, pp. 224-230. (SCI). 本人為通訊作者.

Yu-Chung Tsai, Shih-Feng Tseng, Jung-Chung Hung, Chinghua Hung* (2011). Finite element prediction of the lens shape of molded optical glass lenses. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 225, No. 2, pp. 224-234. (SCI). 本人為通訊作者.

Yuehju Tang, Chinghua Hung*, Yuchoung Chang (2011). Performance Improvements in Low Side Scroll Compressor With Extended Operation Speeds. Applied Thermal Engineering, Vol. 31, pp. 3542-3551. (SCI). 本人為通訊作者.

Yangguang Liu, Chinghua Hung*, and Yuchoung Chang (2010, Aug). Study on involute of circle with variable radii in a scroll compressor. Mechanism and Machine Theory, Vol.45, Issue 11, pp. 1520- 1536. (SCI). 本人為通訊作者.

Yangguang Liu, Chinghua Hung*, and Yuchoung Chang (2010, Mar). Design optimization of scroll compressor applied for frictional losses evaluation. International Journal of refrigeration, Vol. 33, pp. 615-624. (SCI). 本人為通訊作者.

Chien-Lin Liu, Zheng-Cheng Zhong, Shih-Liang Shih, Chinghua Hung, Yong-Eng Lee, and Chen-Sheng Chen* (2010, --). Influence of Dynesys system screw profile on adjacent segment and screw. Journal of Spine Disorder. (SCI).

Huang-Chi Tseng, Chinghua Hung*, and Chin-Chuan Huang (2010). An analysis of the formability of aluminum/copper clad metal with different thicknesses by the finite element method and experiment. International Journal of Advanced Manufacturing Technology. (SCI). 本人為通訊作者.

5. M. T. Yu, T. Y. Lin*, and Chinghua Hung, 2010, " Sequential quadratic programming method with a global search strategy on the cutting-stock problem with rotatable polygons ", Journal of Intelligent Manufacturing(SCI, EI), in printing(DOI: 10.1007/s10845-010-0433-0).

7. Yangguang Liu, Chinghua Hung*, and Yuchoung Chang, 2010, "Design optimization of scroll compressor applied for frictional losses evaluation", International Journal of refrigeration (SCI, EI), Vol. 33, pp. 615-624.

8. Huang-Chi Tseng, Chinghua Hung*, and Chin-Chuan Huang, 2010, "An analysis of the formability of aluminum/copper clad metal with different thicknesses by the finite element method and experiment", International Journal of Advanced Manufacturing Technology (SCI, EI),in printing (DOI: 10.1007/s00170-009-2446-4).

9. Chien-Lin Liu, Zheng-Cheng Zhong, Shih-Liang Shih, Chinghua Hung, Yong-Eng Lee, and Chen-Sheng Chen*, 2010,Influence of Dynesys system screw profile on adjacent segment and screw”, Journal of spinal disorders&Techniques (SCI,EI), Vol. 23, No. 6, pp. 410-417.

10. M.T. Yu, T.Y. Lin*, and C Hung, 2009, “Active-set sequential quadratic programming method with compact neighbourhood algorithm for the multi-polygon mass production cutting-stock problem with rotatable polygons “, International Journal of Production Economics. (SCI, EI), Vol. 121, pp. 148-161.

11. Zheng-Cheng Zhong, Shih-Hao Chen, and Chinghua Hung*, 2009, “Load and displacement controlled finite element analyses on fusion and non-fusion spinal implants “, Proceedings of the Institution of Mechanical Engineers, Part H,Journal of Engineering in Medicine. (SCI, EI), Vol. 223, Issue 2, pp. 143-157.

12. Chang, S. L. *, Tseng, H. C., Hsieh, J. K., Liu, J. H. and Hung, C. H., 2009. “Optimum Design of a Cutting Tool for Manufacturing Rotary Knives,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (SCI, EI), Vol. 223, No. 2 pp. 463-472.

13. Shih-Hao Chen, Zheng-Cheng Zhong, Chen-Sheng Chen, Wen-Jer Chen, and Chinghua Hung*, 2009, “Biomechanical Comparison between Lumbar Disc Arthroplasty and Fusion “, Medical Engineering & Physics (SCI, EI), Vol. 31, Issue 2,pp.244-253.

14. Yangguang Liu, Chinghua Hung*, and Yuchoung Chang, 2009, Mathematical Model of Bypass Behaviors Used in Scroll Compressor“, Applied Thermal Engineering (SCI, EI), Vol.29, Issue 5-6, pp. 1058-1066.

15. Liu, J. H., Hung, C. H. and Chang, S. L. *, 2008. “Design and Manufacture of Plunge Shaving Cutter for Shaving Gears with Tooth Modifications,” The International Journal of Advanced Manufacturing Technology (SCI, EI), Vol.43, No. 9-10,pp.1024-1034.

16. Chang, S. L.*, Liu, J. H., Jin, K. W., Hung, C. H. and Chen, S. H., 2008. “Design Optimization for Robustness Considering the Gear Transmission Error,” Engineering Letters, Vol. 16, Issue 3, No. 18.

17. Shih-Hao Chen, Pei-Fong Hsu, Shih-Heng Chao, Wen-Jer Chen, and Chinghua Hung*, 2008, “Biomechanical Comparison between Transforaminal and Posterior Lumbar Interbody Fusion Devices after Decompressive Surgery “, Journal of Orthopedic Surgery Taiwan, Vol. 25, pp. 121-133.

18. Tung-Hua Cheng*, Ching-Huan Tseng and Ching-Hua Hung, 2008, “Application of a Genetic Algorithm Associated With Adhesive Joint Analysis to the IC Chip Pick-up Process “, Journal of adhesion Science and Technology (SCI, EI),Vol. 22, pp.1057-1072.

19. Yu-Chung Tsai, Chinghua Hung*, and Jung-Chung Hung, 2008, “Glass Material Model for the Forming Stage of the Glass Molding Process “, Journal of Materials Processing Technology (SCI, EI), Vol. 201, pp. 751-754.

20. Ching-Hua Hung, Jia-Hung Liu, Shinn-Liang Cheng*, and Hung-Jeng Lin, 2007, “Simulation of Gear Shaving with Considerations of Cutter Assembly Errors and Machine Setting Parameters“, The International Journal of Advanced Manufacturing Technology (SCI, EI), Vol. 35, No. 3-4, pp. 400-407.

21. Jung-Chung Hung, Yu-Chung Tsai and Chinghua Hung*, 2007, “Frictional Effect of Ultrasonic-vibration on Upsetting “,Ultrasonics (SCI, EI), Vol. 46 pp. 277-284.

22. Tung-Hua Cheng, Ching-Huan Tseng, and Chinghua Hung*, 2006, “Analysis of Stresses in Adhesive Joints Applicable to IC Chips Using Symbolic Manipulation and the Numerical Method“, Journal of Adhesion Science and Technology (SCI, EI), Vol. 20, No. 15, pp. 1669-1692.

23. Jung-Chung Hung and Chinghua Hung*, 2005, “The Influence of Ultrasonic-Vibration on Hot Upsetting of Aluminum Alloy“, Ultrasonics (SCI, EI), Vol. 43 pp. 692-698.

24. Chiachin Lin, Yuchoung Chang, Kunyi Liang, and Chinghua Hung*, 2005, “Temperature and Thermal Deformation Analysis on Scrolls of Scroll Compressor“, Applied Thermal Engineering (SCI, EI), Vol. 25, pp. 1724-1739.

25. Chih-Kang Shih, and Chinghua Hung*, 2003, “Experimental and Numerical Analyses on Three-Roll Planetary Rolling Process “, Journal of Materials Processing Technology (SCI, EI), Vol. 142, pp. 702-709.

26. C. -R. Lin, R. -H. Chen, C. Hung*, 2003, “Preventing Non-uniform Shrinkage in Open-die Hot Embossing of PMMA Microstructure”, Journal of Materials Processing Technology (SCI, EI), Vol. 140, pp.173-178.

27. Masahiro Hayashi*, Masahiko Jin, Sutasn Thipprakmas, Masao Murakawa, Jung-Chung Hung, Yu-Chung Tsai, and Ching-Hua Hung, 2003, “Simulation of Ultrasonic-Vibration Drawing Using the Finite Element Method (FEM)”, Journal of Materials Processing Technology (SCI, EI), Vol. 140, pp. 30-35.

28. C. -R. Lin, R. –H. Chen, and Chinghua Hung*, 2003, “Finite Element Analysis of Hot Embossing of Polymer Optical heet ”,Materials Science Forum (SCI, EI), Vols. 437-438, pp. 379-382.

29. Chih-Kang Shih, Ray-Quen Hsu, and Chinghua Hung*, 2002, “A Study on Seamless Tube in the Planetary Rolling Process” ,Journal of Materials Processing Technology (SCI, EI), Vol. 121, pp. 273-284.

30. C. -R. Lin, R.-H. Chen, and Chinghua Hung*, 2002, “The Characterization and Finite Element Analysis of Polymer under Hot Pressing”, International Journal of Advanced Manufacturing Technology (SCI, EI), Vol. 20, pp.230-235.

31. Chien-Hsing Li, Hong-Shun Chiou, and Chinghua Hung*, 2002, “Integration of Finite Element Analysis and Optimum Design on Gear Systems”, Finite Elements in Analysis and Design (SCI, EI), Vol. 38, pp.179-192.

32. Chih-Kang Shih, Chinghua Hung*, and Ray-Quen Hsu, 2001, “The Finite Element Analysis on Planetary Rolling Process”,Journal of Materials Processing Technology (SCI, EI), Vol. 113, pp. 115-123.

33. T.C. Hsu*, Hung-Mo Wu and Ching-Hua Hung, 2001,“The Computer Simulation of Lubricated Cold Rolling Processes”,Tribology Transactions (SCI, EI), Vol. 44, pp. 191-196.

34. Jung-Chung Hung and Chinghua Hung*, 2000, “The Design and Development of a Hydrostatic Extrusion Apparatus”,Journal of Materials Processing Technology (SCI, EI), Vol. 104, pp. 226-235.

35. I-Nan Chou and Chinghua Hung*, 1999, “The Finite Element Study on Extrusion of Powder/Solid Composite Clad Rod”,Journal of Materials Processing Technology (SCI, EI), Vol. 96, pp. 124-132.

36. I-Nan Chou and Chinghua Hung*, 1999, “Extrusion of Powder/Solid Composite Clad Rods, Part 1: The Deformation Characterization of Powder”, Journal of the Chinese Society of Mechanical Engineers(EI), Vol. 20,No. 3, pp. 287-294.

37. I-Nan Chou and Chinghua Hung*, 1999, “Finite Element Analysis and Optimization on Springback Reduction”,Int. J.Mach.Tools Manufact. (SCI, EI) , Vol. 39, pp. 517-536.

38. Jaw-Shi Shu and Chinghua Hung*, 1996, “ Finite Element Analysis and Optimization of Springback Reduction: the Double-Bend Technique”, Int. J. Mach. Tools Manufact. (SCI, EI) , Vol. 36, No. 4, pp. 423-434.

B.研討會論文

張雅喬,黃麒禎,林佳榮,洪景華（2011年12月）。氣體鋼瓶封片穿刺之有限元素分析。中國機械工程學會第二十八屆全國學術研討會，台中。本人為通訊作者。

顏振傑,林志嘉,洪景華,洪榮崇（2011年11月）。高深寬比金屬板材微流道之液壓成形研究。中華民國力學學會第三十五屆全國力學會議，台南。本人為通訊作者

蔡正一,黃麒禎,林佳榮,洪景華（2010年12月）。高壓氣體鋼瓶O-ring封口之有限元素分析與尺寸最佳化。中國機械工程學會第二十七屆全國學術研討會，台北。本人為通訊作者。

蔡彥彬, 殷立釗, 洪榮崇, 洪景華（2010年11月）。超音波振動輔助玻璃熱壓成形。中華民國力學學會第三十四屆全國力學會議，雲林。本人為通訊作者。

1. 羅正展、蔡凱宙、鍾政成、洪景華，2010，“人工椎間盤Physio-L和Prodisc-L在不同Follower Load預負載下的生物力學行為分析”，2010年台灣生物力學學會及台灣運動生物力學學會聯合年會暨學術研討會， 國立成功大學。(October 29 - 30, 2010)

2. Tseng H.C., Wu Z.C., Hung C., Lee M.F., 2010”Investigation on sheet hydroforming process of Titanium/Aluminum clad metal housing, “Proceedings of the 2010 ASME International Manufacturing Science and Engineering Conference, MSEC2010, October 12-15, 2010, Erie, Pennsylvania, USA.

3. Cheng-Chan Lo, Kai-Jow Tsai, Zheng-Cheng Zhong, Chinghua Hung, 2010, “Biomechanical characteristic of Coflex-F and pedicle screw fixation with TLIF or ALIF surgery - A finite element study.” WCB2010, 6th World Congress on Biomechanics. Suntec Singapore International Convention & Exhibition Centre, Singapore. August 1 - 6, 2010.

4. Kai-Jow Tsai, Cheng-Chan Lo, Chinghua Hung, 2010, “Biomechanical effect of interspinous process decompression device (Coflex) for multilevel lumbar spinal stenosis.” World Forum for Spine Research 2010 - The Intervertebral Disc. Montreal, Canada. July 5 - 8, 2010.

5. 羅正展、蔡凱宙、鍾政成、陳世豪、洪景華，2010，“Coflex-F搭配TLIF或ALIF在融合手術下之有限元素生物力學研究” ，第58屆中華民國骨科醫學會，中國醫藥大學附設醫院。(April 24, 2010)

6. 羅正展、蔡凱宙、鍾政成、陳世豪、洪景華，2010，“TLIF融合手術搭配Coflex-F或單側椎弓螺絲下之有限元素生物力學研究” ，第58屆中華民國骨科醫學會，中國醫藥大學附設醫院。(April 24, 2010)

7. 蔡凱宙、羅正展、鍾政成、洪景華，2009，“脊突間減壓裝置(Coflex)在多節手術的生物力學影響”，第57屆中華民國骨科醫學會，國立臺灣大學醫學院附設醫院。(October 24 - 25, 2009)

8. 羅正展、蔡凱宙、鍾政成、洪景華，2009，“Coflex-F與Pedicle Screw fixation在融合手術下之有限元素生物力學研究”，第57屆中華民國骨科醫學會，國立臺灣大學醫學院附設醫院。(October 24 - 25, 2009)

9. H-C Tseng, Z-C Wu, C Hung, M-H Lee, C-C Huang, 2009. “Investigation of Optimum Process Parameters on the Sheet Hydroforming of Titanium / Aluminum Clad Metal for Battery Housing” 4th international conference on tube hydroforming, Kaohsiung, Taiwan, September, 6-9, 2009.

10. 陳世豪、江銘傑、鍾政成、陳文哲、洪景華，2009，“應用伴隨負荷之有限元素模型對融合與非融合腰椎植入物之分析比較”，台灣脊椎外科醫學會98 年度會員大會暨學術研討會，台北。

11. 陳世豪、趙時恆、鍾政成、羅正展、洪景華，2009，“減壓手術時TILF 搭配使用單側或雙側椎足螺釘系統之生物力學特徵比較–有限元素模擬分析”，台灣脊椎外科醫學會98 年度會員大會暨學術研討會，台北。

12. Shih-hao Chen, Shih-Heng Chao, Zheng-Cheng Zhong, Chinghua Hung, Wen-Jer Chen, 2009. "Biomechanical comparison of unilateral and bilateral pedicle screws fixation for transforaminal lumbar interbody interbody fusion after decompressive surgery - A finite element analysis" Orthopaedic Research Society 55th Annual Meeting (ORS 55th), No. 1725, Las Vegas, Nevada, US.

13. H-C Tseng, C Hung, C-C Huang. 2008. “The analysis of forming limits of aluminum/copper clad metal with different thickness ratio by finite element method and deep drawing process.” 9th International Conference on Technology of Plasticity, Pusan Korea, September, 7-11, 2008.

14. S-H Chen, Z-C Zhong, M-C Chiang, W-J Chen, C Hung, 2008. "The load and displacement controlled finite element analyses with follower load on fusion and non-fusion spinal implants." 55th Congress of Taiwan Orthopaedic Association, Taoyuan, Taiwan.

15. 陳世豪、趙時恆、鍾政成、羅正展、洪景華，2008，“兩種新型前位椎間融合器(SynFix and Stabilis)與傳統融合固定法之生物力學特徵比較 - 有限元素模擬分析”，第55屆中華民國骨科醫學會，林口長庚醫院。(October 25 - 26, 2008)

16. 陳世豪、羅正展、蔡凱宙、鍾政成、洪景華，2008，“減壓手術後脊突間減壓裝置(Coflex)的生物力學影響”，第54屆中華民國骨科醫學會，中國醫藥大學附設醫院。(April 19, 2008)

17. Chang, S. L., Liu, J. H., Jin, K. W., Hung, C. H. and Chen, S. H., March, 2008. “Robust design for gear transmission error,” The 2008 IAENG International Conference on Industrial Engineering, Hong Kong.

18. Hung, C. H., Liu, J. H., Chang, S. L. and Lin, H. J., June, 2007. “Simulation of gear shaving with considerations on cutter assembly errors and machine setting parameters,” The 9th International Conference on Automation Technology, Taipei, Paper No. Mach00010.

19. Chang, S. L., Lin, H. J., Chu, C. H., Liu, J. H. and Hung, C. H., March, 2007. “Simulation of gear shaving machine and tooth contact analysis of the shaved gears,” The 2007 IAENG International Conference on Industrial Engineering, Hong Kong.

20. Z -C Zhong, S-H Chen, W-J Chen, C Hung*, 2007 , “Comparison of the load and displacement controlled finite element analyses on fusion and non-fusion spinal implants” International Society of Biomechanics XXI Congress (21st ISB 2007),Taipei, Taiwan , July 1-5, Published on Journal of Biomechanics (SCI, EI), Vol. 40, S2, S353.

21. S-H Chen, Z-C Zhong, M-C Chiang, W-J Chen, C Hung*, 2007, “The load and displacement controlled finite element analyses on fusion and non-fusion spinal implants.” 53nd Congress of Taiwan Orthopaedic Association, Taoyuan, Taiwan, October 27-28.

22. S-H Chen, P-F Hsu, Z-C Zhong, C-C Lo, W-J Chen, C Hung, 2007, “Biomechanical comparison between transforaminal and posterior lumbar interbody fusion devices after decompressive surgery.” 53nd Congress of Taiwan Orthopaedic Association, Taoyuan, Taiwan ,October 27-28.

23. S-H Chen, Z-C Zhong, W-J Chen, C Hung*, 2007, ” Biomechanical comparison between artificial disc and lumbar interbody fusion devices.” 52nd Congress of Taiwan Orthopedic Association Combine The 15th Annual Meeting of Taiwan Spine Society, Kaohsiung, Taiwan, April 28.

24. 洪榮崇、洪景華，2006，“超音波振動於鋁合金成形加工的摩擦效應研究”，中國工程師學會第二十三屆全國學術研討會。

25. 王嘉偉、洪景華、黃國政、洪榮崇、余宗儒、曾釋鋒，2006，“Hot Embossing Forming of Optical Glass Lens”，中國工程師學會第二十三屆全國學術研討會。

26. Jung-Chung Hung and Chinghua Hung, 2006, “The Effect of Ultrasonic Vibration on Upsetting “, 8th International Conference on Engineering Systems Design and Analysis, Torino, Italy.

27. Zheng-Cheng Zhong, Ming-Fu Chiang, Chinghua Hung, Chen-Sheng Chen, Cheng-Kung Cheng, 2005, “Biomechanical comparison of instrumented lumbar interbody fusion with one or two cages by finite element analysis” The 2nd Asian Pacific Conference On Biomechanics (APB2005), Taipei, Taiwan,November 23-25.

28. 洪榮崇、洪景華，2004，“超音波振動於鋁合金高溫壓縮之影響”，中國工程師學會第二十一屆全國學術研討會。

29. 陳進龍、洪景華、林佳榮，2003，“高分子光分歧器隻微熱壓成形研究”，中國工程師學會第二十屆全國學術研討會。

30. 陳進龍、吳得群、洪景華，2003，“Optimal Fabrication Process of Polymer Splitter by Micro Hot Embossing”，第七屆奈米 工程暨系統技術研討會。

31. Masahiro Hayashi, Masahiko Jin, Sutasn Thipprakmas, Masao Murakawa, Jung-Chung Hung, Yu-Chung Tsai, and Ching-Hua Hung, 2003, “Simulation of ultrasonic-vibration drawing using the finite element method (FEM)”, 6th Asia Pacific Conference on Materials Processing, Taipei, ROC.

32. C. -R. Lin, R. –H. Chen, and Chinghua Hung, 2002, “Finite element analysis of hot embossing of polymer optical sheet ”,International Conference on Advanced Materials Processing, Singapore.

33. 潘旭元、洪景華，2002，“流旋型加工之有限元素模擬研究”,中國工程師學會第十九屆全國學術研討會。

34. 林佳榮、洪景華，2001，“高分子薄板之熱壓成形模擬研究”，中國工程師學會第十八屆全國學術研討會。

35. Chih-Kang Shih, Ray-Quen Hsu, and Chinghua Hung, 2001, “The Finite Element Analysis on Planetary Rolling Process”, 5th Asia Pacific Conference on Materials Processing, Seoul, South Korea.

36. 施智綱、洪景華，2000，“The Finite Element Analysis on seamless tube in planetary rolling process ”，中國工程師學會第十七屆全國學術研討會。

37. 林佳榮、陳仁浩、洪景華，2000，“分光片熱壓成型之模擬分析（一）：材料流動特性之探討”，中國工程師學會第十七屆全國學術研討會。

C. 技術報告及其它

黃麒禎,范馨勻,洪景華（2010年12月）。38g及67g CO2 高壓鋼瓶開發計畫。元翎精密工業股份有限公司委託案報告。

林志嘉,洪景華（2010年08月）。SANYO壓縮機1988年~2009年專利摘要表分析。工研院委託案報告。

劉陽光,洪景華（2010年03月）。壓縮機性能測試平台系統設計軟體。工研院委託案報告。

蔡正一,黃麒禎,洪景華（2010年03月）。N2O高壓氣體鋼瓶封口漏氣改善。元翎精密工業股份有限公司委託案報告。

林志嘉,洪景華（2009年08月）。壓縮機1988年~2008年專利摘要表分析。工研院委託案報告。

曾煌棊,洪景華（2009年08月）。複合金屬材料之板液壓製程設計與最佳化。金屬工業研究發展中心委託案報告。

曾煌棊,洪景華（2008年12月）。複合材料之成形製程參數研究。金屬工業研究發展中心委託案報告。

劉陽光,洪景華（2008年11月）。可變壓縮比渦捲式二氧化碳冷媒壓縮機模擬分析軟體開發(II)。工研院委託案報告。

1. 可變壓縮比渦捲式二氧化碳冷媒壓縮機模擬分析軟體開發(II), 2008 年1月。

2. 複合材料之成形製程參數研究, 金屬工業研究發展中心委託案報告, 2008 年12 月。

3. 精密光學技術-應用於數位成像系統, 工研院委託案報告, 2007 年12 月。

4. OMTC 工程-吸塑成形模擬分析研究, 台灣山葉機車公司委託案報告, 2007 年12 月。

5. 輥軋複合金屬後加工成形技術，金屬工業研究發展中心委託案報告, 2007 年12 月。

6. 視窗版二氧化碳冷媒壓縮機模擬分析軟體開發(II), 工研院能資所委託案報告, 2007 年11 月。

7. 可變壓縮比渦捲式壓縮機模擬分析軟體開發, 工研院能資所委託案報告, 2007 年11 月。

8. 電動手煞車(EPB)專利分析與機構設計, 車輛研究測試中心委託案報告, 2007 年12 月。

9. 視窗版二氧化碳冷媒壓縮機模擬分析軟體開發, 工研院能資所委託案報告, 2006 年11 月。

10. R600a 冷媒往復式壓縮機軟體社機開發by NIST , 工研院能資所委託研究成果報告, 2006 年10 月。

11. 機車鋁合金車架之應力分析與結構最佳化, 三陽公司委託研究成果報告, 2005 年12 月。

12. CNT-FED 面板機械性質模擬研究, 工業技術研究院委託研究成果報告, 2005 年12 月。

13. 可移動式稻草固態錠型燃料製作機之概念設計,工業技術研究院委託研究成果報告,2004 年12 月。

14. 大尺寸光學膜片轉寫成形技術與公差分析研究成果報告, 工業技術研究院委託研究成果報告, 2004 年12 月。

15. 超音波輔助複合擠製成形之研究,國科會專題研究成果報告,2004 年07 月。

16. LCD 光源模組製造與成形技術研究成果報告, 2003 年12 月。

17. RDF 成形機制分析, 工業技術研究院委託研究成果報告, 2002 年11 月。

18. 壓縮機內部溫度場與熱變形量測與分析, 工業技術研究院委託研究成果報告, 2002 年11 月。

19. 顯示屏成形模擬研究, 工業技術研究院委託學術機構研究成果報告, 2000 年12 月。

20. 齒輪箱機構應力分析, 工業技術研究院委託學術機構研究成果報告, 2000 年10 月。

21. 高溫超導線材之靜水壓擠製研究,國科會專題研究成果報告, NSC-87-2212-E-009-023, 1998 年09 月。

22. 圓柱齒輪傳動機構之強度分析, 工業技術研究院委託學術機構研究成果報告, 1998 年06 月。

23. 旋壓成型發動機外殼之製程參數分析與殘留應力對液壓實驗之影響( 三), 國防科技專題計劃成果報告,CS87-0210-D-082-006, 1998 年09 月。

24. 渦捲式壓縮機渦捲之熱流與應力分析,國科會專題研究成果報告, NSC-86-2212-E-009-029, 1997 年09 月。

25. 高壓擠製筒之設計與製造,國科會專題研究成果報告, NSC-86-2212-E-009-015, 1997 年09 月。

26. 電動工具齒輪傳動機構動態行為分析, 工業技術研究院委託學術機構研究成果報告, 1997 年09 月。

27. 旋壓成型發動機外殼之製程參數分析與殘留應力對液壓實驗之影響( 二), 國防科技專題計劃成果報告,CS86-0210-D-082-007, 1997 年08 月。

28. 非金屬粉體/金屬固體複合包芯材擠製之有限元素研究,國科會專題研究成果報告, NSC-86-2212-E-009-029, 1996 年09 月。

29. 旋壓成型發動機外殼之製程參數分析與殘留應力對液壓實驗之影響( 一), 國防科技專題計劃成果報告,CS85-0210-D-002-006, 1996 年08 月。

30. 塑性加工之介面接觸及摩潤的有限元素分析研究, 國家高速電腦中心委託計劃成果報告, NCHC-85-05-005,1996 年08 月。