Embedded Files
Course selection week with our module
Course selection week with our module
We brought our module during lunch so that underclassmen know what the class is about and the types of projects we are working on.
Print of the base failed because it became crooked
Print of the base failed because it became crooked
The printed stopped over night and the base ended up being crocked which is probably why the print failed.
Full print of the base where the module attaches -- the module fits well!
Full print of the base where the module attaches -- the module fits well!
We made a base that attaches on the top of your bed and then you could switch out the modules. We wanted it to look minimalist.
Cut the wire to the fan and controlled it with an Arduino and our button
Cut the wire to the fan and controlled it with an Arduino and our button
IMG_0589.MOVDrilling the hole into the module and the base for the wires (very brave)
Drilling the hole into the module and the base for the wires (very brave)
IMG_5126.MOVIMG_5127.MOV
Printing the walls of the base that we can hide the wires inside. Printing the new lid for the module with slits for the evaporation to come through.
Printing the walls of the base that we can hide the wires inside. Printing the new lid for the module with slits for the evaporation to come through.
Work on the karting game, using Unity's particle system to add sparks to the ramp
Work on the karting game, using Unity's particle system to add sparks to the ramp
Page updated
Report abuse