Projector Connection

Switching on the projector

  1. Turn on the projector using the wall switch.

  2. Turn on the patch panel.

  3. Press the “Projector On/Off” button.

  4. Connect the VGA and/or audio cable to one of the PC1/PC2/PC3 input ports (Do ensure the LED beside the ports is lit up).

  5. If the LED is not lit up, press the “PC” button to toggle between the three ports.

  6. To adjust volume, please use the volume control function from the laptop.

  7. If volume is still too soft/loud, please adjust the volume control/knob on the patch panel.

Switching off the projector

  1. Press the “Projector On/Off” button.

  2. Disconnect the VGA and/or audio cables from the input ports.

  3. Wait for a minute before switching off the wall switch.