• (Vol.19, No.1; January-March - 2026) 

1. Composite materials for aerospace applications: a comprehensive review

2. Design and fabrication of undamped dynamic vibration absorber with two-spring mass system

3. Fabrication and testing of conventional solar still with fins

4. Development of an automated plate washing systems

(Vol.19, No.2; April-June - 2026)

• Minimizing springback of steel strips in V-Die bending using numerical simulation and optimizing parameters

• Dynamic stability analysis of a coupled two-spool rotor system with damping and intershaft effects

• Enhancing inner race centerline accuracy in cold forging using staatistical process control and preventive maintenance

• Functionally graded composite materials for drone structures and smart data engineering: a comprehensive review

(Vol.19, No.2; April-June - 2026)

• Investigation and optimization of kerf width and surface roughness in AZ31 magnesium alloy by wire electric discharge machining

• Box-shaped deep drwaing of annealed AZ31 magnesium alloy at high temperatures

• Estimation of ploughing force with the aid of expermentation and slip line field theory

• Green sand molding process: challenges and data-driven optimization strategies

• Emerging trends and challenges in facility layout planning: a comprehensive review

• (Vol.33, No.1; Feb, 2026)

1. Challenges in production and placement of alkali activated concrete for in-situ applications

2. Experimental study on comparison of equivalent concrete compressive strength of cores and rebound hammer tests with in-place and standard cubes

3. Enhanced MPPT for PV systems using a two-stage hybrid fuzzy logic and P & O algorithm

4. Developing fired bricks from drinking water sludge and fly ash using cow dung and rice husk biomass wastes as internal fuel

5. Design and optimization of high-performance organic solar cells based on DPPEZnP-TBO active layer

6. Advancing sustainability with the integration of PV-wind system for electric vehicle charging with optimized MPPT hybrid DC-DC converter

7. Structural properties and porous nature of newly developed NEG materials

8. Pressure dependent thermoelectric properties of B1 and B2 phase of BaS

9. Design and performance analysis of novel coaxial magnetic gear using subdomain method

10. Evaluating the effects of carbon black from recycled tires on subgrade stabilization, pavement design, and construction-phase CO2 emissions

11. Use of landslide problem for the identification parameters in geotechnics

(Vol.33, No.2; April, 2026)

1. Evaluating line source emission models for Indian urban environments 

2. Design and experimental validation of a hexagonal split-ring resonator sensor for microwave dielectric characterization of liquids 

3. Comparative performance evaluation of diesel, Amoora rohituka and Calophyllum inophyllum biodiesel-ethanol blends in a compression ignition engine 

4. Structural analysis and classification of silver–graphene oxide (Ag-GO) nanocomposites using SAM-based segmentation and machine learning models 

5. Predicting the optimal composition of sugarcane bagasse ash (SCBA) and ground granulated blast furnace slag (GGBS) in ternary blended supplementary cementitious system 

6. Investigating the effect of non-uniform ceramic dispersion on the mechanical properties of hybrid Al-Cu composite via powder metallurgy route 

7. Experimental study on partial replacement of concrete constituents with demolition wastes and carbon compounds 

8. Performance, emission, and optimization of CuO-doped ternary biodiesel in CI engines 

9. Design optimization of cold storage for agricultural product using corner curvature and thermal backup system: A case study on brinjal and tomato 

10. Optimization of rooftop PV layouts in Baghdad using 3D shading and PVsyst with energy-density approach 

• (Vol.19, No.1; Jan-Mar, 2026)

1. Alternative materials used for enhancing thermal properties of ferrocement

2. Exploring bamboo as an ecofriendly solution for ferrocement structures

3. Rethinking conventional materials: ferrocement for sustainable construction and life-cycle approaches

4. Ferrocement jacketing for seismic rehabilitation: a sustainable retrofitting approach for RC facilities

5. Investigating the thermal comfort of buildings with insulted sandwiched ferrocement panels

6. Ferrocement structures: a resilient housing solution for war-affected zones

7. Prefabricated ferrocement panels: a solution for affordable and sustainable housing

8. Weaving strength and shelter: the ferrocement paradigm

9. Crushed sand, bottom ash and grit as natural sand substitutes in ferrocement construction

10. Physical manifestation of digital design: challenges in realizing nonstandard ferrocrete shells

• (Vol.19, No.2; April-June - 2026)

• Analysis and design of an RCC underpass across a state highway

• Performance evaluation of binary and ternary blended sustainable green concrete using CDW

• Alternative ground improvement materials for road pavement over soft soil: a comparative numerical evaluation

(Vol.19, No.3; July-September - 2026)

• Residual strength and durability of HVFAC under sustained thermal loads and cooling regimes

• Effect of agriculture waste ash stabilizers on moisture durability of earth blocks for low-cost housing in tropical regions

• Social sustainability assessment in urban building construction: a mixed-methods framework for developing countries

1. Developments in micromachining processes

2. Electrochemical machining with identical polarity of tool and workpiece: a feasibility study

3. Investigation into WECM of nitinol SMA using ozonated NaNO3 electrolyte 

4. Prospects for electrochemical discharge micr-drilling of sustainable materials: an extensive review

5. Hybrid approach for parametric optimization of wire-electrochemical spark micromachining of borosillicate glass

6. Data-driven modeling and optimization for recast layer in electric discharge drilling of inconel-718 material

7. Wettability enhancement of inconel 625 alloy by fabricating ordered micro-textures through micro-milling

8. The synergy of NiTi shape memory alloys and additive manufacturing: applications and future directions

9. Optimization of GMAWparameters AA7075 T6 aluminum alloy using Rao algorithms

• (Vol.13, No.01; March - 2026)

1. Enhanced heat transfer in a vertical heated channel by incorporation of inclined plates

2. Flow of couple-stress and micropolar immiscible liquid layers between permeable beds with entropy generation

3. Gas cyclone performance prediction: a state-of-the art review of theorical modeling approaches

4. Thermal and rheological analisis of eeliptical ducts and non-newtonian nanofluids in heat exchanger applications

5. Heat transfer and thermal rediation effects on the phan-thein-tanner fluid model under peristaltic flow with a permeable porous wall

6. Thermoeconomic analysis and optimization of a novel geothermal based multi generation system for electricity generation, cooling, heating and hydrogen liquefaction

7. Prediction and optimization of viscosity of ethylene glycol based ZnO nanofluids using response surface methodology

8. Numerical study of temperature field of tinplate in the quench process

• (Vol.17, No.01; January - April, 2026)

1. Development of a novel analytical framework for investigating non-symmetric deformation in strip rolling

2. Design and development of fiber sandwiched composite materials for improvment of mechanical properties

3. Design and development of a triboelectric sensor for a generic counting application

4. Effect of thermal conditions on microstructure and mechanical properties of AA5083 processed by equal channel angular pressing

5. Enhancement of horizontal jet impingement heat transfer analysis on vertical flat

• (Vol.07, No.01; January-June - 2026)

1. Automotive computer simulations for improving aerodynamics in vehicle design

2. Modular vehicle design: balancing cost, efficiency, and sustainability

3. Impact of modular architecture on the design flexibility of electric vehicles

4. Optimization of exhaust gas recirculation (EGR) systems for improved fuel efficiency

5. Dynamic information analysis for predictive maintaintenance in automobile engineering

6. Advancements in fuel economy through engine management systems

7. Computer simulation models for evaluating vehicle crashworthiness in automotive design

8. Hydraulic systems in modern automobile brake systems: a design perspective

9. Integration of smart automation devices in modern automobile manufacturing

10. Role of automation in enhancing of automotive quality control systems

(Vol.72, No.07; July 2026)

1. Microstructural evolution, mechanical hardness and electrical conductivity of a Cu-Cr alloy rod fabricated via horizontal continuous casting

2. Study of effect of secondary cooling on titanium nitride precipitation during continuous casting of high-strength steel slab+

3. Navigating the carbon border adjustment mechanism (CBAM): a techno-economic assessment and mitigation framework for the Indian metallurgical sector

4. How AI vision is transforming foundariesand steel plants+

(Vol.72, No.07; July 2026)

• Integrated cladding of pure aluminium to hypo-eutectic aluminium-silicon alloy casting

• Understanding wear castings in mineral excavation and processing

• 75th Annual General Meeting: a milestone evening in Jaipur ushers in new leadership for 2026-27

• Urja Sanchay: driving energy efficiency, delivering impact

• Advancing foundry excellence: NCSD executes strategic skill development

• Laying the foundation for MSME exports through MDP

• Project Prayaas takes delegates through five Kolhapur foundries

• Green casting technique takes centre stage at Howrah chapter

• Parliament passes MSMED Amendment Bill 2026, rewriting the rulebook for MSME growth

• Social media and AI driven skilling for employability enhancement: implications for the Indian Foundry sector

• Mythology and management: timeless lessons in decentralisation

• IFF News & Trends

• (Vol.17, No.02; June-July 2026)

1. Global push toward efficient industrial finishing fuels momentum in the powder coating equipment market

2. Sau goodbye to coatings and nitrogen purge for corrosion prevention in void spaces

3. Long-term corrosion protection of traveling screens in saltwater service at a nuclear power plant

4. Climate change impacts on exterior coatings: challenges and adaptive solutions in Bangladesh

• (Vol.63, No.01; January-April, 2026)

1. Performance Assessment of HMAM under Different Climate Zones Using a Multi-Criteria Decision Approach

2. Photothermal-Responsive PVA–GelMA@rGO Nanocomposite Hydrogel for Light-Controlled Anti-Inflammatory Drug Delivery in Neural ApplicationsF

3. Preparation and pH-Responsive Behavior of GO–CS–DOX Nanoparticles: A Preliminary In Vitro Evaluation

4. Mechanical Property Assessment of Polyacid-Modified Composite Resins: An In Vitro Approach

5. Responsive Hydrogel Enables Targeted Factor Delivery for Local Neurorepair in a Parkinson’s Disease Model

6. Comparative Performance of Commercial Biocompatible Dental Materials in Primary Tooth Pulpectomy: Systematic Review of Efficacy and Tissue Compatibility

7. Does Light Curing Affect the Water Sorption and Water Solubility Properties of Alkasite and Bulk-Fill Glass Hybrid Materials?

8. Injectable Bioactive Hydrogel Enhances Endometrial Regeneration for Recurrent Pregnancy Loss via Angiogenesis and Immunomodulation

9. AChitosan/Oxidized Pullulan Composite Film for Localized Cisplatin Delivery and In Vitro Evaluation on Nasopharyngeal Cells

• (Vol.21, No.01; January-June, 2026)

1. Design optimization of endplate for a small H-Darrieus vertical axis wind turbine at a low tip speed ratio
   Shinya IMAI, Toshiki KOBAYASHI, Wataru YAMAZAKI

2. Direct numerical simulation of turbulent flow in an annular pipe with large-scale control using buoyancy force
   Yuki OKA, Hiroya MAMORI, Menglei WANG, Takeshi MIYAZAKI

3. A new wetting boundary condition based on solid surface free energy density in two-phase lattice Boltzmann simulations
   Kota SAITO, Masato YOSHINO, Kosuke SUZUKI

4. Diverse microstructures of magnetorheological fluid induced by shear flows (A direct numerical investigation)
   Tsutomu ANDO, Ryoga FUJII, Osamu KOIKE, Rei TATSUMI, Noriyuki HIROTA

5. Surface tension modeling in phase-field lattice Boltzmann simulations (Formulations and discretization strategies)
   Makoto SUGIMOTO, Masayuki KANEDA, Kazuhiko SUGA

6. Impact of groove filling due to particle accumulation on the drag reduction performance of riblets in turbulent channel flow
   Hiroya MAMORI, Yoshitsugu NAKA, Chikara SHIMIZU, Akihisa FUJII, Mao IM ...

7. Mass-preserving particle level set method with kernel function correction for engineering dam-break flow applications
   Shunsuke KURIOKA, Changhong HU

8. Effect of nozzle spacing on flow mixing and development of triple rectangular free jets arrayed in a line
   Koichi HAYASHIDA, Takahiro KIWATA, Peter OSHKAI