This project was an introduction to the playground express as well as Microsoft MakeCode. We were tasked with making a "power glove" that utilized the playground express' many features. In addition, we were tasked with adding at least one additional neopixel sequin.
Before sewing down the playground express and micropixels, I made sure my program was working. Because I have a Computer Science background, I wanted to do as much as I could! I made use of most of the sensors that I could: touch, tilt, and temperature as well as the buttons and switch. I played with the light sensor but it didn’t make it into the final project.
The most difficult part of making my power glove was definitely the sewing. I quickly got tired of the fiddliness of trying to sew the neopixel sequins directly onto the glove, so I found a scrap piece of stretch fabric to sew the sequins on instead. This was also helpful when it came time to adjust my circuit. Not all of the sequins would light up at the same time, and I needed to tie down some of the conductive thread so that they wouldn’t touch and cause shorts.
This is a video of my final product attached to the glove!