3D PRINTING INSTRUCTION

3D Printing Instructions

Part 1 - Exporting an .stl file from Fusion 

• As seen in the image below, select the UTILITIES Tab and under MAKE, click on the drop down and select 3D PRINT

• Once the 3D print pop-up appears make sure to:

  • • uncheck "send to utility" box

    • make sure your object is selected

    • Click OK and save the .stl to your Term 2 Folder. 

Part 2 - Converting the .stl file to .gcode for the printer

• Open Cura through the search bar on your computer.

• Go through all the "next" clicks until you arrive at a screen that asks for a printer.

• The lowest bar will say "Add a non-networked printer" - Click on that

• You are going to add the Monoprice Mini v2 and finish out the process.

• Now open (or drag and drop) your .stl file so that it appears in the print area

• Check that everything is below is done correctly:

  1. 1. Check that the bottom surface is flat by ensuring it's one colour (no red areas)

     2. Under settings, ensure that:

        • • the supports are turned on

          • Infill = 20% (recommended) - If you need your object to be stronger, see your Mr. W

          • Check adhesion: none (default)

• Get Mr. W to check your file 

• Acquire the MicroSD card and adapter and plug into USB port

• Click on slice and save to the MicroSD card. 

• Remove the MicroSD

Part 3 - The Print!

• Put the microSD back into the printer CAREFULLY and print!