At Jordan Stables, we include Working Equitation in our riding lessons because it gives both horse and rider opportunities to communicate more effectively. Each obstacle helps students practice something new, like steering through patterns, getting their horse to stand still, or using body cues correctly.
With decades of combined knowledge from our instructors' experience training horses and teaching riders at all levels, and 8 years of Jordan Stables' operation, we've found that Working Equitation is valuable for teaching real horsemanship.
In this blog, we’ll talk about the Working Equitation obstacles we use in our arena and what we focus on when teaching each one.
If you’d like to learn more about why we love incorporating this sport in our curriculum, you can read more in our blog post Working Equitation at Jordan Stables.
Working Equitation (WE) is a sport that brings together traditional horsemanship, dressage, and obstacle work. It started with working horsemen in countries like Portugal, Spain, France, and Italy. These riders needed horses that could handle all kinds of terrain, move cattle, and listen to their cues while on the job.
Today, Working Equitation tests those same skills with riding patterns, obstacles, and cattle work.
The sport is made up of four phases:
Dressage: Horse and rider complete a set riding pattern. Judges look at how the horse responds to the rider’s cues and how accurately they perform each movement.
Ease of Handling (EOH): Riders complete an obstacle course. Each obstacle has its own requirements, and the rider is judged on how well they complete it.
Speed: Many of the same obstacles are used again, but ridden for time to test agility and accuracy under pressure.
Cattle Work: Horse and rider work to separate a specific cow from the herd and move it to a designated area. This phase comes directly from the sport’s ranching background.
At Jordan Stables, we spend a lot of our Working Equitation lessons practicing Ease of Handling. We like how much it teaches our students, whether they’re beginners learning to steer or experienced riders working on advanced skills.
Ease of Handling is the obstacle portion of Working Equitation. Riders complete a course made up of different obstacles, with each one testing a particular riding skill.
Some obstacles ask the horse to move forward through a narrow space. Others have the horse back up, turn, stop, or stand still while the rider does a task.
In this phase, riders don’t race to finish. Instead, they’re judged on how well they ride each obstacle.
We remind our students that just getting through an obstacle doesn’t always mean it was done right. How they approach it, where they put their horse, and what happens before moving on all matter.
Below, we’d like to share a closer look at the obstacles we often set up and the valuable horsemanship skills they help develop.
The Figure 8 is one of the obstacles we use to work on steering and turning. Riders go around two barrels in a figure-eight pattern, making a circle around each barrel before changing direction.
What we practice:
Entrance: The rider comes in straight and centered between the barrels.
Circles: Both circles should be round and about the same size.
Body cues: Students need to use their legs and seat to help turn their horse, not just pull on the reins.
Riders sometimes focus so much on getting around the barrels that they forget about their own position. We help students learn to look ahead and get ready for the next turn before they get there.
Three Drums takes the steering skills from the Figure 8 and adds another barrel. Riders follow a set pattern around all three drums, changing direction as they go.
What we practice:
Entering the obstacle in the correct place.
Making even circles around the drums without cutting corners.
Using leg and body cues to keep the horse turning correctly.
Students also need to watch where they’re going next. If they look down at the barrel or wait too long to get ready for a turn, it can mess up the whole pattern.
The Bridge is a great obstacle for building a horse’s confidence. Some horses walk across it easily, while others need more time to feel comfortable stepping onto something raised.
For success, the rider gives clear direction and avoids rushing the horse.
What we practice:
A straight approach to the bridge.
An upright, balanced rider.
A calm walk across without rushing or stopping unnecessarily.
This obstacle helps students learn patience with their horses. We want them to know when to ask their horse to move forward and when to give the horse a moment.
Step Poles help you learn where your horse’s feet are at all times.
For this exercise, students guide their horse between the poles and stop with the front feet in the correct position. Once the horse has settled, they move forward again until the hind feet are between the poles.
This exercise takes more body control than most people would expect, instead of rein pressure.
What we practice:
Where the horse’s front and hind feet are positioned.
Stopping with little to no use of reins.
Letting the horse stand quietly before asking it to move again.
We use this exercise to teach students how to make small adjustments instead of asking their horse for too much movement at once.
For the Cup Swap, riders stop between two upright poles and move a cup from one pole to the other.
The horse should stand still while the rider does the task. We also want students to position themselves so they can reach the cup without leaning too far forward or backward.
What we practice:
Positioning: Stop centered between the poles, close enough to reach both sides.
Stop and settle: The horse must stand quietly for the whole duration of the task.
Cup swap: Move the cup to the other pole while keeping both reins properly held in one hand.
Students soon learn they can’t do this obstacle well if their horse keeps moving. It’s a good chance to practice patience and proper control.
The Jug obstacle is like the Cup Swap because the rider has to do a task while the horse stands still.
Students approach a table, stop close enough to reach the jug, and pick it up. In our lessons, we have riders raise the jug above their head before placing it back on the table.
What we practice:
A centered halt next to the table.
Three full seconds of standing quietly before starting the task.
Raising and replacing the jug without leaning too far out of the saddle.
Holding both reins correctly in one hand.
We pay close attention to how students position their horses before reaching for the jug. If they stop too far away, they have to lean to reach it. We want them to learn to set themselves up right from the start.
The Step Box helps students practice stopping, positioning, and turning.
Students guide their horse into a marked area and work on getting the horse in the right position before asking for a turn.
What we practice:
Entering the box without rushing.
Stopping in the correct spot.
Using the rider’s legs and seat during the turn.
Keeping the horse from stepping outside the marked area.
This exercise shows students how much control they have over their horse’s body. As they get better, we can ask for more precise movements and tighter turns.
The L Corridor uses poles on the ground in the shape of an L. Riders guide their horse through the corridor without stepping over or hitting the poles.
The hardest part is making the turn at the corner.
Students need to think about the horse’s whole body, not just its head. A horse might get its front feet around the turn but still hit a pole with its hind feet.
What we practice:
A straight entrance between the poles.
Enough room to make the turn without touching the sides.
A steady pace through the corridor.
Proper steering using leg pressure that keeps the horse’s body lined up with the path.
We use this obstacle to teach students how to plan their turns and notice how much space their horse needs.
The Reinback L is a tougher version of the L Corridor. Instead of riding forward, the horse has to back through an L-shaped path.
Backing up in a straight line is one thing, but asking a horse to back around a corner takes more control.
What we practice:
Backing slowly without rushing.
Keeping the horse straight through the first part of the corridor.
Making small adjustments to get around the corner.
Using gentle rein and body cues.
We don’t want students to pull harder on the reins if their horse gets confused. Instead, we want them to slow down, think about what they’re asking, and give a clear cue.
The Spear Ring is one of the more unique Working Equitation obstacles.
Riders carry a long pole, called a garrocha, and use it to pick up a ring. They then return the pole to its designated location.
The challenge is to handle the pole while still riding and keeping control of the horse.
What we practice:
Riding with the reins in one hand.
Keeping their horse on the correct path while carrying the pole.
Positioning themselves to collect the ring.
Staying balanced while reaching with the pole.
This obstacle lets students practice skills a working horse person may use to complete tasks on horseback.
The Jump obstacle has the horse and rider go over a small jump during the course.
We use this exercise to help riders improve their position, timing, and balance.
What we practice:
Approaching the jump straight.
Keeping a steady pace.
Using the correct two-point position.
Staying balanced as the horse goes over and lands.
We want students to feel confident in their position before trying harder jumping exercises. The height of the jump is not our main focus. We pay attention to how the rider approaches the jump and supports their horse through the movement.
During the Ease of Handling phase, judges give riders a score for each obstacle.
According to USA Working Equitation (USAWE) rules, scores range from 0 to 10. A 10 means the obstacle was done very well, while lower scores show there were mistakes or issues.
Judges watch the horse’s movement, the rider’s position, and how well the pair completes the obstacle.
For example, a rider may get through the Figure 8 without missing a barrel, but if the circles are uneven or the horse loses its rhythm, that can affect the score.
A few things that can lower a score include:
Approaching an obstacle incorrectly.
Knocking down or moving parts of an obstacle.
Losing the correct gait or rhythm.
Resistance from the horse.
Completing an obstacle incorrectly.
Some mistakes can lead to penalties or even elimination, depending on the rules and the level of the competition.
At Jordan Stables, we use scores in our student shows to give riders clear feedback. This helps them see what they did well and what they can work on.
Yes! This is one of the reasons we enjoy teaching Working Equitation.
Students don’t need to be advanced riders to start learning obstacle work. We use the same obstacles for different lesson levels by changing what we ask each student to do.
For example, a beginner may practice the Figure 8 at a walk with larger circles. A more experienced rider can work on making the circles smaller, maintaining a specific gait, or completing the pattern with more accurate body cues.
The obstacle stays the same, but what we expect changes as the rider advances levels.
Working Equitation is also great for the horses! It keeps their minds engaged. Rather than repeating the same riding patterns every lesson, we add new exercises to give the horses something different to focus on. This creates happy working horses.
Working Equitation is one of our favorite ways to teach students and work with our horses. There is always a new skill to practice, another obstacle to learn, or a fresh challenge to tackle.
If you’re interested in horseback riding or horsemanship lessons in Litchfield Park, AZ, we would love to hear from you.
Text Jordan Stables at (602) 535-9577 to find out more about our lesson program and upcoming events.
You can also follow us on Facebook and Instagram to see what our students and horses are working on!