Abhinav Maurya and Prince Kumar Singh, "Effect of Ladle Shroud Design on Tundish Hydrodynamic Performance and Attendant Influence on Tundish Open Eye", Steel Research International, 2500081, 2025. (https://doi.org/10.1002/srin.202500081)
Arun Kumar Patro, Kolli Venkatesh, Shashishekhar Prajapati, Trinath Talapaneni, Prince Kumar Singh & Avala Lavakumar, "Beyond the Blade: A Microstructural Investigation of an Ancient Indian Steel Sword", Metallography, Microstructure, and Analysis, 2025. (https://doi.org/10.1007/s13632-025-01226-x)
Sheshang Singh Chandel, Avala Lavakumar, Navneet Singh Randhawa, and Prince Kumar Singh, "Unique hot stage modification technique to enhance cementitious properties of electric arc furnace steel slag", Journal of Environmental Management 376, 2025. (https://doi.org/10.1016/j.jenvman.2025.124398)
Abhinav Maurya and Prince Kumar Singh, "Internal Gas Injection into Ladle Shroud and Improvement in Tundish Hydrodynamic Performance", Steel Research International 2400707, 2024. (https://doi.org/10.1002/srin.202400707)
Sheshang Singh Chandel, Navneet Singh Randhawa, and Prince Kumar Singh, "Enhancing Recycling Potential: Exploring Reduction and Metal Separation Behavior of Iron-Rich Slag in Electric Arc Furnace Smelting for a Sustainable Future", Journal of Sustainable Metallurgy, 2024. (https://doi.org/10.1007/s40831-024-00875-6 )
Sheshang Singh Chandel, Prvan Kumar Katiyar, Navneet Singh Randhawa, and Prince Kumar Singh, "A Review on Environmental Concerns and Technological Innovations for the Valorization of Steel Industry Slag", Mining, Metallurgy & Exploration, 2023 (https://doi.org/10.1007/s42461-023-00886-z)
PK Katiyar, A Lavakumar, R Maurya, PK Singh, "High entropy alloys (HEAs) as a binder material for heavy tungsten alloys, tungsten carbide hardmetals, and titanium carbo-nitride based cermet composites—a comprehensive review", Advances in Materials and Processing Technologies 9 (4), 1979-2016 (2023) (https://doi.org/10.1080/2374068X.2022.2142397)
Soumya Sourav Sarangi, Avala Lavakumar, Prince Kumar Singh, Prvan Kumar Katiyar, and Ranjit Kumar Ray, "Indentation size effect in steels with different carbon contents and microstructures", Materials Science and Technology 2022. ( https://doi.org/10.1080/02670836.2022.2113157)
Katiyar, Prvan Kumar, Rita Maurya, and Prince Kumar Singh. "Highlighting the corrosion mechanisms of corroded plain carbon steels using the atomic force microscopy." (2022): 198-220. (https://doi.org/10.22712/susb.20220017)
Katiyar, Prvan Kumar, Rita Maurya, and Prince Kumar Singh. "Corrosion behavior of plain carbon steels under different heat treatment conditions in freely aerated 3.5% NaCl solution." (2022): 44-68. (https://doi.org/10.22712/susb.20220005)
Prvan Kumar Katiyar, Rita Maurya, and Prince K. Singh, "Failure Behavior of Cemented Tungsten Carbide Materials: A Case Study of Mining Drill Bits", Journal of Materials Engineering and Performance, 2021. (https://doi.org/10.1007/s11665-021-05829-7)
Rohit Tiwari, Prince K. Singh, Ankur Agnihotri and Dipak Mazumdar: "Shrouded transfer of molten steel from a ladle to tundish: thermal modelling and industrial scale measurements", AIST Transactions, Vol. 16, No. 2, 2019, pp. 1-16. (https://doi.org/10.2355/isijinternational.ISIJINT-2018-127)
Prince K. Singh and Dipak Mazumdar, "Mathematical modelling of gas-liquid two flows in ladle shroud", Metallurgical and Materials Transactions B, (2019), 50, 1091-1103. (https://doi.org/10.1007/s11663-019-01526)
Prince K. Singh and Dipak Mazumdar, "A physical model study of two-phase, gas-liquid flows in ladle shrouds and applications to industrial scale, ladle to tundish transfer operation" Metallurgical and Materials Transactions B, 2018, 49(4), 1945-1962, 2018. (https://doi.org/10.1007/s11663-018-1297-5).
D Mazumdar, Prince K Singh, Rohit K Tiwari: "Shrouded transfer of molten steel from ladle to tundish: current understanding, mathematical modelling and new insight", ISIJ, (2018), 58(8), 1545-1547. (https://doi.org/10.1007/s12666-018-1496-4).
Ankur Agnihotri, Prince K Singh, Rishikesh Mishra and Dipak Mazumdar: Steady state materials and enthalpy balance: applications to ferroalloy production and industrial scale validation , Trans Indian InstMet (2019), 72(2), 455-472. (https://doi.org/10.1007/s12666-018-1496-4).
Prince Kumar Singh, Prvan Kumar Katiyar, Rita Maurya, Avala Lava Kumar,"Agglomeration behaviour of steel plants solid waste and its effect on sintering performance," Journal of Materials Research and Technology, (2017), 6(3), 289-296. (https://doi.org/10.1016/j.jmrt.2016.11.005).
Prince Kumar Singh, Prvan Kumar Katiyar, Avala Lava Kumar, Dinesh Kumar Mishra and Ajit Behera, "Agglomeration behavior of solid waste materials in steel plants", Emerging Materials Research, (2016), 5(1), 171-176. (https://doi.org/10.1680/jemmr.15.00014).
Prvan Kumar Katiyar, Prince Kumar Singh, Rityuj Singh, A. lava Kumar, "Modes of failure of cemented tungsten carbide tool bits (WC/Co): A study of wear parts", International Journal of Refractory Metals and Hard Materials, (2014), 54, 27-38. (https://doi.org/10.1016/j.ijrmhm.2015.06.018).
A. Lava Kumar, Ch. V. S. Murthy, Prince Kr Singh, Bhargav Chaithanya and Shiva Kumar, "Property enrichment of aged nickel base superalloy supercast 247A", International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME), (2013), 2(4), 115-120.
Topic: Steelmaking and Refractories; A residential, three-day continuing education program; Department of Materials Science &Engineering; IIT Kanpur on 18th Jan 2023.
Delivered a talk on the Role of modeling in steelmaking: Current trends and a useful insight through laboratory experiments and corresponding numerical validation; Arcelor Mittal/Nippon Steel India on 15th Sep 2022.
Topic: Role of Modelling in steelmaking: Current insights & Limitations, Department of Materials Science; Metallurgical Engineering IIT Bombay on 11th Jan 2022.
Topic: Cracking in strand casting causes and Remedies; Five-Day Online STTP on Aspects of Continuous Casting of steel (ACCS-21), VNIT Nagpur Maharashtra INDIA on 26th Nov 2021.
Keynote lecture on Casting of liquid steel: Processing Steps: Effects & Corresponding Defects: AFTMME IIT ROPAR (December 9-11, 2021)
Keynote lecture on the Conceivable implication of melt transfer on its cleanliness through shroud from ladle to tundish – An insight to flow characteristics: International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (December 19-20, 2020).
Sheshang Singh Chandel, Abhinav Maurya, Navneet Singh Randhawa, Prince Kumar Singh. “Iron Recovery Approach from Steel Slag Using Droplet Coalescence Technique” Springer Nature Singapore (2024): 21-27.
Charwak Ambade, Sheshang Singh Chandel, and Prince Kumar Singh, "Reduction Kinetics of Composite Steel Slag-Coke Pellets", Springer Nature Singapore (2023): 52–57.(https://doi.org/10.1007/978-981-99-6863-3_7)
Abhinav Maurya, Prvan Kumar Katiyar, Prince Kumar Singh, "AN OVERVIEW OF THE MATHEMATICAL MODELLING OF REHEATING FURNACES ", Futuristic Trends in Mechanical Engineering Volume 3 Book 3, IIP Series, Volume 3, May, 2024, Page no.110-139, (https://www.doi.org/10.58532/V3BIME3P2CH3)
Abhinav Maurya, Prvan Kumar Katiyar, Prince Kumar Singh, "AN OVERVIEW OF THE NUMERICAL MODELLING AND MONTE CARLO SIMULATION OF REHEATING FURNACES ", Futuristic Trends in Mechanical Engineering Volume 3 Book 3, IIP Series, Volume 3, May, 2024, Page no.78-109, (https://www.doi.org/10.58532/V3BIME3P2CH2)
Prince K. Singh , Ranjan S and Dipak Mazumdar, "Gas-Liquid Flows in Ladle Shroud and Their Impact on Tundish Process Performance and Steel Quality", "Advanced High Strength Steel", (2018). (https://doi.org/10.1007/978-981-10-7892-7_17).
Sheshang Singh Chandel, Abhinav Maurya, Prince Kumar Singh and Navneet Singh Randhawa: Iron recovery approach from steel slag using Droplet Coalescence Technique .International Conference on Fundamental and Industrial Research in Materials, December 2023. (IIT Ropar).
Sheshang Singh Chandel, Prince Kumar Singh and Navneet Singh Randhawa, "Thermogravimetric study of Electric Arc Furnace Slag", International Conference on Metallurgical Engineering and Centenary Celebration October 2023. (IIT BHU).
Sheshang Singh Chandel, Navneet Singh Randhawa, Prince Kumar Singh, "Thermodynamic and kinetic aspect of solid state reduction of Electric Arc Furnace slag through coke: An experimental study." Materials Today: Proceedings (2023).
Sheshang Singh Chandel, Abhinav Maurya, and Prince Kumar Singh. "Numerical investigation of quenching technique for steel alloy hardening process using twins liquid jets." Materials Today: Proceedings (2022).
Suvam Mukherjee, Prince K Singh and Dipak Mazumdar: "Ladle shroud performance enhancement: a process modelling investigation", Proceeding, IREFCON-2020 (Kolkata), in press.
A. Agnihotri, Prince K Singh, D. Singh and M. Gupta, Foamy slag practice to enhance the energy efficiency of electric arc furnace: an industrial scale validation: Materials Today Proceeding in press.
Dipak Mazumdar, Prince Kumar Singh, Rishikesh Mishra and Krashnavtar: "Simulation of steelmaking processes: an assessment of reduced and full scale water modelling, numerical simulation vis a vis plant scale measurements" Proceeding., STEELSIM2019 (AIST), Toronto, Canada, Aug. 13-15 th , 2019, pp.769-779.
Rohit K Tiwari, Prince K Singh, Dipak Mazumdar : Molten steel-refractory interface: Thermal resistance estimation and industrial scale measurements, NMD ATM 2018, 14th-16th November 2018, Kolkata, India.
Prince K Singh, Rohit K Tiwari, Dipak Mazumdar, Abhishek Dutta : Modeling of two phase, gas- liquid flows in ladle shroud "7th International congress on science and technology of steelmaking", Published in proceeding of ICS2018 (Presented on 13th June 2018 at Venice, Italy).
Prince K. Singh and Dipak Mazumdar: "Macroscopic modeling of argon-steel flows inside a ladle shroud", Published in proceeding of STIS17, IIT Kanpur, India (Presented on 13th December 2017 at IIT Kanpur).
Arun Kumar, A. Lavakumar, Prince K. Singh and S. K. Badjena "A review on Metalic Foams" [Poster presented in national conference on "Behind the teachers desk-2015" (April 9 th -10 th ) in CSIR-NML Jamshedpur.
Prince Kumar Singh, P.K. Katiyar, A. Lava Kumar and S. Pramanik, "Recycling of blast furnace flue dust and sludge used as pellets in sintering" (Presented at NMD ATM 2013 at IIT BHU).
A.Lavakumar, P.K.Singh, P.K.Katiyar, T.Trinath and A.K.Jaiswal, "Archaeometallurgical studies of ancient sword" (NMD ATM 2014, 12th–15th November 2014, College of Engineering, Pune).
A Lavakumar, N Bhargav Chaitanya, B Shiva Kumar, Virinchi Sainath and Prince Kr Singh "Study of Tensile Fracture Mechanisms of a Ni-base superalloySupercast 247A" Published in proceedings, Procedia Materials Science under Elsevier Ltd, , Vol.5 pp1090-1096.
A. Lava Kumar, Prince Kr Singh, Sanjay Srivastava, Suraj Kori and Ajay Kumar "Gamma prime coursing behavior of nickel superalloy supercast 247A after prolonged thermal exposures" 2nd National conference on Recent developments in mechanical engineering, (RDME' 2013) April 26–27, 2013 Pune, Published in Journal: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN (e): 2278-1684, ISSN (p): 2320-334X, PP: 37-42.
A. Lava Kumar, Prince Kr Singh, Rabindra Kr Rai and Sanjay Srivastava "Measurement of thermo-physical properties of nickel base super alloys", International conference on metallurgical manufacturing and mechanical engineering (ICMMME'13), April 30th 2013.
A Lava Kumar, Prince Kumar Singh, M. Sai Krishna Rao, Ch. V. S. Murthy, N. Eswara Prasad "Boronising Behavior of Nickel and Iron Nickel base alloys" (Poster presented in 10th International Symposium on surface protective coatings (SSPC India 2013) on Feb 15th & 16th , 2013), Mumbai (India).